Steering Columns (61)
Suppliers of vehicle steering column assemblies, parts and components.
Admiral Tool & Manufacturing Company of Michigan in Livonia, Michigan.
A provider of tool and metal forming technology. Product application areas include steering columns and modules; cooled bins; shift mechanisms and shift levers; dash seals; service brakes; rack & pinion steering gears; tilt levers; parking brake assemblies; and automatic transmission modules, etc. CAE capabilities include linear static analysis, dynamic stress analysis, heat transfer analysis, fluid flow analysis, mechanical event simulation. Tool testing capabilities include key life/durability testing, NVH (hammer tap) testing, steering column drop sled crash simulation testing, ultimate load testing, etc.
Advanced Forming Technology USA in Longmont, Colorado.
Services include metal injection molding combining powder metallurgy and plastic injection, thixoforming, and metal matrix composites.
AdvanTech International in Somerset, New Jersey.
Provides start-to-finish capabilities for specialty cold forming, machining, heat-treating, plating, etc. Part capabilities include engine stud bolts, diesel glow plugs, alternator stud bolts, shift rods, torsion rods, steering shafts, brake tie rods, stud mounting bolts, and brake push rods, etc.
AGS Automotive Systems in Scarborough, Ontario.
A manufacturer of heavy metal stampings for the automotive industry, including assembly and finishing of the stamped products including cross members, control arms, suspension components, instrument panel structure assemblies, modular assemblies, general stampings, and front and rear bumper assemblies.
AISIN U.S.A. Manufacturing, Inc. in Seymour, Indiana.
Develops and manufactures automotive components and systems such as door frames, roofs, latching systems, brakes, engines, seating, trim molding, etc.
Allied Tube & Conduit Corporation in Harvey, Illinois.
A manufacturer and fabricator of mechanical steel tubing, in-line galvanized steel tubing, aluminum tubing, custom rollform products (coated and uncoated), etc. Automotive applications include door impact beams (DIBs) and structural components.
Anchor Manufacturing Group, Inc. in Cleveland, Ohio.
A manufacturer of class A appearance trim including front and rear skid plates, step plates, window and door sills and assemblies; steering column components including jacket and tube assemblies, straps, levers, lock adapters, braces, brackets, and other safety critical components; welded assemblies, and standard stampings for interior, exterior, structural, exhaust, NVH, ride control, seating, brake, chassis, and other applications. Materials include stainless steel, carbon steel, advanced high strength steel, galvanized and organic coated steel, aluminum and high strength aluminum, beryllium copper, and other metals. In-house capabilities include advance product development, prototyping, metal stamping, welding, automation, machining, staking, riveting, tapping, fabricating, powder coating, and tool & die.
Angstrom Precision Metals in Mentor, Ohio.
Capabilities include carburizing and nitriding. Facilities include a metallurgical laboratory and quality laboratory with CMM capability. Products include transmission races, power steering sleeves, steering column locking levers, pressure relief valves and ABS components.
ArcelorMittal Woodstock in Woodstock, Ontario.
Fully integrated tube manufacturer offering steel manufacturing, steel tube manufacturing, CNC bending, press forming, assembly robotic MIG welding, hydroforming, Multiwall™ tubing, and laser cutting. Products include instrument panel supports, suspension components, axle housings, frame components, control arm sleeves and engine supports.
Atlas Pressed Metals in DuBois, Pennsylvania.
A producer of powder metal bearings and structural components.
Bekaert-Contours in Orrville, Ohio.
A manufacturer of custom shaped, round, and coated metal profiles and parts, special shaped wires, and flat wires utilizing both cold-rolling and cold-drawing. Annealing, hardening & tempering, and various coatings including galvanized and Bezinal® are available. Shaped and round wire and shaped metal profiles are provided by coil, bar length, and exact-cut lengths. Post-processing services available.
Cascade Engineering, Inc. in Grand Rapids, Michigan.
A manufacturer of injection and blow molded parts and components for the automotive, medium and heavy truck and other industries. Applications include sound barriers and absorbers (engine covers, HVAC covers, solenoid covers, and manifold covers) and automotive trim, door panels, seat backs, and components (floor console assemblies, steering column covers, cowl grilles, interior door panels, and carpeted map pockets, etc.), as well as blow molded tubular products.
Cosma International, Inc. in Brampton, Ontario.
An automotive metal-forming supplier. Designs, engineers and manufactures exterior and interior vehicle systems. Products range from chassis stampings and bumper beams to large exterior sheet metal body panels.
Douglas Autotech Corporation in Hopinsville, Kentucky.
A supplier of automotive directional controls, steering columns and shifters.
Douglas Autotech Corporation in Bronson, Michigan.
A manufacturer of steering systems (columns, I-Shafts, covers, keylocks, and other dressings) as well as straight, tap-up/tap-down and gated shifters.
DURA Automotive Systems, LLC in Auburn Hills, Michigan.
A designer and manufacturer of driver control systems and a supplier of door modules, glass systems, seat mechanisms and structures, and engineered assemblies. Products include door modules, parking brake systems, automotive cables, transmission shifter systems, encapsulated and sliding windows, encapsulated glass systems, power and manual window regulators, hinges, latches, seat mechanisms and structures, engine control products, underbody tire carriers, jacks, brake, clutch and accelerator pedals, adjustable pedal systems, and other mechanical assemblies.
EFP Corporation in Elkhart, Indiana.
Automotive products include jack stand trays, bumper cores, floor spacers, steering column fillers, side impact components (for door panels), upper instrument panel fillers, pillar area pads, knee bolsters, head impact components, rear load floor/trunk spacers, water shields, headrests and dunnage trays.
Fiat Chrysler U.S., LLC in Perrysburg, Ohio.
Products include steering columns and torque converters.
FICOSA North America Corporation in Madison Heights, Michigan.
A provider of automotive systems and components such as rear-view systems (interiors and external), gear shift systems (automatic and manual), parking control systems (hand brake manual or electrical), command and control cables, systems for seats and doors, pedals, windscreen and headlamp washer systems, air tubes, tanks for water and liquid brakes, sun visors, steering column & starter locks as well as closing and locking systems.
Fuji Autotech U.S.A., LLC in Walton, Kentucky.
A supplier of automotive seat components, steering columns and shifter selectors.
Gibbs Die Casting Corporation in Henderson, Kentucky.
A global supplier of aluminum and magnesium die-castings for A/C compressors, fan drives, steering wheel armatures, engines, transmissions, and suspension applications. Services include machining, assembly and testing.
Huf North America in Milwaukee, Wisconsin.
Products include keys, lock sets, handles, steeering components and column locks.
JTEKT Automotive Tennessee - Vonore Company in Vonore, Tennessee.
A supplier of power steering systems and hydraulic hoses.
Katayama American Company Inc. in Shelbyville, Kentucky.
A manufacturer of exhaust flex couplings, exterior & interior trim, as well as door sashes, etc.
Kongsberg Automotive, Inc. in Novi, Michigan.
A global supplier of seating comfort, automotive gear shift and heavy truck components. Products include seat comfort systems such as head restraints, arm rests, seat heat, vent, and lumbar supports; clutch actuation systems; cable actuation systems; gear shifters; transmission control systems; stabilizing rods, couplings; electronic engine controls; specialty hoses; tubes and fittings, etc.
Kostal of America, Inc. in Troy, Michigan.
A supplier of automobile electrical products such as manually operated devices/switches, vehicle electrical system control devices, roof modules, driver assistance components, keyless entry, steering column modules, door modules, etc.
Koyo Corporation of U.S.A. in Plymouth, Michigan.
Automotive Bearing Sales & Technical Center. Supplies integrated vehicle system components for control of vehicle dynamics. Products include steering systems, driveline products, bearings and machine tools. Technical expertise includes electronically controlled steering systems, driveline components and machining systems.
Koyo Corporation of U.S.A. in West Lake, Ohio.
A manufacturer of ball & roller bearings, hub units, water pump bearings, long life bearings for automotive drive train, transmission and components as well as engine bearings. Services and technical capabilities include application development plus bearing analysis and testing.
Linamar Corporation in Guelph, Ontario.
A supplier of engine, transmission, and driveline sub-assemblies, full assemblies and modules. Products include cylinder heads, camshafts, crankcases and connecting rods, transmission shafts, differential cases, valve bodies, gears, clutch assemblies, transmission pumps, knuckles, brake drums, brake rotors, control arms, rack and pinion assemblies, gears. Services include precision machining, assembly, testing, product development, engineering, system Integration, custom shipping & logistics.
Madison-Kipp Corporation in Madison, Wisconsin.
A supplier of aluminum engineered machined parts and subassemblies (high pressure, squeeze, ductile, semi-solid), complex machining and assembly services.
Mando America Corporation in Opelika, Alabama.
Manufactures brake caliper modules, calipers, steering gears, struts, and shocks.
Meridian Lightweight Technologies, Inc. in Plymouth, Michigan.
A supplier of high-pressure lightweight magnesium die-cast automotive parts as well as machined and assembled components. Products include instrument panel beams, transfer cases, seat frames, radiator supports, front end carriers, steering column brackets/supports, transmission cases, engine cradles, as well as other body structure, chassis and powertrain components.
Meridian Lightweight Technologies, Inc. in Strathroy, Ontario.
Produces magnesium components for the automotive industry such as instrument panels, steering column brackets and housings, transfer cases and support brackets.
Meridian Lightweight Technologies, Inc. in Strathroy, Ontario.
Designs, engineers and manufactures high pressure magnesium die cast, machined and assembled automotive components. Products include instrument panel beams and transfer cases. Other products include seat frames, radiator supports, front end carriers, steering column brackets and supports, transmission cases, engine cradles, other body structure, chassis and powertrain components.
Metal-Matic, Inc. in Minneapolis, Minnesota.
A manufacturer of welded carbon steel tubing. Products applications include motion control gas springs and dampers, shock absorbers and struts, steering columns, isolator bushings, seat assembly components, power steering cylinders and components, fluid tubing, braking sleeves, stabilizer and tie rod tubes, axle tubes, prop and drive shafts, exhaust components, air bag components, shift levers, engine mounts, fuel rails and injection components, shafting as well as guide tubes and spacers.
Methode Electronics, Inc. in Chicago, Illinois.
Designs, manufactures and markets devices employing electrical, electronic, wireless, sensing and optical technologies to control and convey signals through sensors, interconnections and controls. Products include switches, sensors, electric modules, air bag clock spring assemblies, and wire harnesses.
Midwest Control Products Corporation in Bushnell, Illinois.
A supplier of linkage end products, ball joints, clevis ends, clevis spring pins, forged yoke ends, eye road ends, and tubing fabrication.
Mitchell Plastics USA in Kitchener, Ontario.
A supplier of injection molded components and plastic automotive interior parts. Capabilities include in-house product design, development, engineering, and testing as well as various manufacturing processes such as injection moulding, assembly, and decorating processes.
Nemak Wisconsin in Sheboygan, Wisconsin.
Die-casters of automotive powertrain and engine components. Services include precision machining and modular assemblies. Products include transmission cases, oil pans, steering housings, starter housings, brackets, front covers, cam caps, bearing ladders, axle tubes, bed plates, bell housings, oil filter adapters, valve bodies, and cam covers, etc.
Nexteer Automotive Steering Solutions Services Corporation in Saginaw, Michigan.
Products areas include steering systems: active steering, electric power steering (column assist electric power steering (CEPS), EPS intermediate shafts, pinion assist electric power steering (PEPS), premium eps rack & pinion gears. rack assist electric power steering (REPS), etc.), hydraulic power steering, and torque overlay solutions; steering components: columns, intermediate shafts and electronics, modules & sub-assemblies; driveline products: front wheel drive halfshafts, intermediate drive shafts, rear wheel drive halfshafts, and propeller shaft joints.
NSK Steering Systems America, Inc. in Bennington, Vermont.
A manufacturer of steering columns and associated components. Products include roller bearings, specialty bearings, linear bearings, ball screws, steering columns and wheel hubs, etc. Performs mechanical testing on steering columns.
OTSCON, Inc. in Columbia, Missouri.
A supplier of parking brake systems and brake pedals for the automotive and industrial industry including hand lever assemblies, foot pedal assemblies, cable assemblies and brake pedal assemblies.
PMC SMART Solutions, LLC in Cincinnati, Ohio.
A plastic injection molder. Supplies integrated plastic components and assemblies to the automotive and other industries. Specializes in under-hood components for engine management systems. Expertise in plastic processing of thermoplastic insert, hot-oil, thermoset, compression and transfer molding plastic materials including glass-filled nylons, PPS, Acetal/POM, PPA/Amodel, PET, PBT, ABS, etc. Capabilities include product design, prototyping, tooling and high-volume production.
Principal Manufacturing Corporation in Broadview, Illinois.
A provider of fineblanking and conventional stamping services including insert molding, broaching, welding, deburring, drilling, CNC machining, milling, tapping, turning, and assembly requirements. Current capabilities include plastic insert molding, fineblanking up to 500 tons, and conventional stamping up to 400 tons. Other products include screw machine components such as pins, bushing, and shafts for assemblies.
PTC Alliance in Wexford, Pennsylvania.
A supplier of welded and cold drawn mechanical steel tubing, chrome plated bar products, fabricated tubular parts and precision components. Automotive capabilities include shock absorbers, rack & pinion steering, body & engine mounts, camshaft tubing, assembled camshafts, steering linkages, rocker arm shafts, sway bars, collapsible steering columns, intrusion door beams, drive/prop shafts, axle housings, hydroform frame tubing, bushings & bearings and exhaust components.
Robert Bosch Automotive Steering, LLC in Hebron, Kentucky.
Produces steering columns, power steering pumps and other steering systems.
Robert Bosch, LLC in Farmington Hills, Michigan.
Parts/components supplied include gasoline systems (engine management, modules and engine components, fuel injectors, sensors, ignitions, electronic throttle control, integrated air/fuel modules); diesel systems (electronic diesel control, air management, fuel injection management, exhaust gas management); chassis (antilock braking, traction control, electronic stability programs, brake assistance, sensors, hydraulic braking and components such as brake boosters & master cylinders, disc brakes, drum brakes, wheel modules); energy & body (alternators/starters, airflow systems, software and electronics, engine thermal management components, climate-control components, seating comfort, mechatronics for side doors & roofs, windshield and rear-window cleaning); car multimedia (indication & display instruments, car radios, cockpit electronics, HMI, navigation & driver info); electronics (electronic control units, electronic occupant-protection, driver-assistance, semiconductors, sensors, relays).
RPK Mexico S.A. de C.V. in Celaya, Guanajuato.
A manufacturer of springs, wire forms and copper coils for the automotive industry.
Solvay Specialty Polymers USA, LLC in Alpharetta, Georgia.
Provides engineering thermoplastic polymers. Applications include heating and cooling, air induction, fuel, electrical, electronics, etc.
SPX Corporation in Charlotte, North Carolina.
A supplier of special service tools, equipment, diagnostics and information services for vehicle OEM dealership networks. Also a supplier of automotive transmission fluid filters.
TABC, Inc. in Long Beach, California.
Produces sheet metal components, steering columns, catalytic converters, and coated catalytic substrates. Also assembles commercial trucks. Operations include stamping, body welding, painting, catalytic coating, catalytic converter assembly and steering column assembly.
Torrington Forming Machinery, Inc. in Brossard, Québec.
Services include cold forming metal tubes and rods for the automotive industry. Processes used include rotary swaging, in-line end forming, rotary forming, and push-pull. Further processes include drilling, milling, stamping, notching, chamfering and deburring.
TRAM, Inc. in Plymouth, Michigan.
A supplier of switches, steering wheels, airbags, steering column locks, and key sets.
Wanxiang America Corporation in Elgin, Illinois.
A contract manufacturer of drivelines, brakes and bearings and related components such as U-joints, CV joints, yokes, automotive bearings and hubs, industrial bearings & drive shafts as well as electric motors for seating, windshield wipers, and other 12 volt applications.
Waupaca Foundry, Inc. in Marinette, Wisconsin.
Products include brake anchors, differential cases, calipers, bearing caps, slack adjusters, spring hangers, steering housings, etc.
Zanini Tennessee, Inc. in Winchester, Tennessee.
Products include badges, body side moldings, interior trunk trim, back door tailgates, steering column covers, airbag covers, water deflectors, grille radiators as well as trim for steel and aluminum wheels.
Zanini USA, Inc. in Southfield, Michigan.
A provider of automotive trim products which include badges, body side moldings, interior trunk trim, back door tailgates, steering column covers, airbag covers, water deflectors, grille radiators as well as trim for steel and aluminum wheels. Capabilities include product design, development, validation, etc. Developes and manufacters paints and varnishes.
ZF Gainesville, LLC in Gainesville, Georgia.
A manufacturer of 5 and 6 speed manual transmissions, powershift transmissions for construction equipment, and parking brakes.
ZF North America in Northville, Michigan.
A supplier of automotive transmissions, steering systems, suspension components, and axles. Ball joint & suspension link testing for friction/torque & axial/radial elasticity, wear, fatigue, and sealability, transmission test, axle road simulation, control arm test, elastomer test, etc.
ZF TRW North America in Lafayette, Indiana.
A supplier of steering gears & pumps, steering columns & linkages, and Putnam arms.
ZF TRW North America in Livonia, Michigan.
Products include active & passive safety systems.