Suppliers of vehicle steering system linkages, hoses, boots and related components.
ABC Group, Inc. in Toronto, Ontario.
Provides a complete line of thermoplastic systems and components for air induction systems, fluid management systems, fuel systems, exterior and interior systems, including instrument panels and spoilers for the global automotive industry. Processes include blow molding, injection molding, thermoforming, powder slush molding, flexible foaming systems, sheet extrusion, interior/exterior painting, metal stampings and material compounding.
American Axle & Manufacturing, Inc. in Detroit, Michigan.
Products include driveline systems, chassis systems, and forged products including rear axles, independent front axles, independent reaProducts include driveline systems, chassis systems, and metal-formed products including rear axles, independent front axles, independent rear-drive systems, propeller shafts, steering linkages, anti-roll systems, TracRite differentials, forged products, and steering & suspension components, and steering & suspension components.
Bourns, Inc. in Riverside, California.
A manufacturer of electronic components for automotive applications include steering, fuel level, audio controls, circuit protection devices, board level components, non-contacting and pressure sensors.
Carbo Forge, Inc. in Fremont, Ohio.
A producer of forgings in carbon and alloy such as brake components (brake levers and pins for drum brakes); steering components (tie rod ends and steering yokes); power steering fittings; and drivetrain components (shifter forks and ball stud yokes).
Coi Rubber Products, Inc. in City of Industry, California.
A manufacturer of molded rubber and plastic components.
ContiTech North America, Inc. in Montvale, New Jersey.
A supplier of air spring systems, elastomer coatings, fuel hoses, hoses and hose assemblies for heating/cooling systems, belt drive systems and vibration control products.
Cooper-Standard Automotive, Inc. in Novi, Michigan.
A global manufacturer of sealing system products, fluid system products, and noise, vibration, and harshness control products, and other related products.
Dana Sealing Products Group in Paris, Tennessee.
Develops composite bipolar plates for fuel cell applications. Capabilities include incorporation of polymer seals with the construction of bipolar plates.
Eaton Corporation in Cleveland, Ohio.
Expertise in component integration platforms for engine air management systems, powertrain and specialty controls. Produces mono- and multi-cylinder heads in aluminum or cast iron, diesel and gasoline fuel filters, oil filters, fuel vapor valves, and common rail diesel pressure/flow regulators, valvetrain products, superchargers, cylinder heads, locking and limited slip differentials, sensors, actuators, transmission control modules, mirror glass actuators, suspension controls, tire valves, decorative body moldings and fluid connectors including hoses, hose assemblies, fittings and adapters.
Enforge, LLC in Albemarle, North Carolina.
Capabilities include cold and warm forging. Products include steering linkage assemblies, control arms, suspension links and struts, track bars, toe links, camber links, etc.
Formex Metal Industries, Inc. in Kitchener, Ontario.
Supplies automotive suppliers with metal components. Specialties are tube forming, and tube and wire bending, screw machined products as well as secondary operations.
Freudenberg-NOK General Partnership in Plymouth, Michigan.
Powertrain products including engine and transmission sealing products, air/fuel delivery modules, noise, vibration and harshness (NVH) modules. Chassis products including NVH modules, suspension components, bushings and mounts, axle and bearing seals, rubber, plastic and PTFE components for steering, brake, electrical and fuel packages.
Gil-Mar Manufacturing Company, Inc. in Canton, Michigan.
A supplier of precision-machined castings of aluminum and iron. Products include high-volume welded and assembled steering linkages and stabilizer links. Capabilities include design, testing and prototyping, etc. Operations include coining, reaming, drilling, tapping, broaching, milling, welding and light assembly.
Hitachi Cable America, Inc. in New Albany, Indiana.
Products include rubber hoses, machined and other metal components, HEV high and low voltage cables and assemblies as well as other electrical components.
JTEKT Automotive Tennessee - Vonore Company in Vonore, Tennessee.
A supplier of power steering systems and hydraulic hoses.
Kongsberg Automotive, Inc. in Novi, Michigan.
A global supplier of seating comfort, automotive gear shift and heavy truck components. Products include seat comfort systems such as head restraints, arm rests, seat heat, vent, and lumbar supports; clutch actuation systems; cable actuation systems; gear shifters; transmission control systems; stabilizing rods, couplings; electronic engine controls; specialty hoses; tubes and fittings, etc.
Machined Products Company in Elk Grove Village, Illinois.
Provides machining of iron castings such as steering knuckles, yokes, flanges, valve guides, steel parts and fittings for brake lines, fuel line fittings, steel tube assemblies and fittings for fuel line and piston cooling assemblies, etc.
Machine Laboratory, LLC in Lenexa, Kansas.
A manufacturer of high volume, precision CNC, close tolerance, complex engineered machined components for the automotive and other industries.
Meadville Forging Company in Meadville, Pennsylvania.
A manufacturer of closed-die forged products. Specializes in steel alloy wheel hubs, transmission gears, die components and kingpins.
Meridian Lightweight Technologies, Inc. in Eaton Rapids, Michigan.
A supplier of magnesium parts for the automotive industry such as instrument panels, steering column brackets, half instrument panels, pedal brackets and transfer cases.
Michigan Forge Company in Lansing, Michigan.
Products include engine and chassis components such as closed die forgings, crankshafts, connecting rods, rocker arms, front axle beams, steering knuckles, transmission parts, hubs and open die forgings, etc.
Midwest Control Products Corporation in Bushnell, Illinois.
A supplier of linkage end products, ball joints, clevis ends, clevis spring pins, forged yoke ends, eye road ends, and tubing fabrication.
Mid West Fabricating Company in Amanda, Ohio.
A manufacturer of cold formed parts and components from 1/4 inch to 1 1/4 inch in diameter. Products include brace rods, support rods, special and standard fasteners, linkages, prop rods, latch rods, steering shafts, spindles and levers, etc.
Minnesota Rubber and Plastics in Plymouth, Minnesota.
Specializes in rubber-to-metal, rubber-to-thermoplastic, rubber-to-teflon, and high performance elastomeric components in customized compounds. Products include o-rings, seals, etc.
Nexteer Automotive Steering Solutions Services Corporation in Saginaw, Michigan.
Products areas include steering systems: active steering, electric power steering (column assist electric power steering (CEPS), EPS intermediate shafts, pinion assist electric power steering (PEPS), premium eps rack & pinion gears. rack assist electric power steering (REPS), etc.), hydraulic power steering, and torque overlay solutions; steering components: columns, intermediate shafts and electronics, modules & sub-assemblies; driveline products: front wheel drive halfshafts, intermediate drive shafts, rear wheel drive halfshafts, and propeller shaft joints.
Nichirin-Flex U.S.A., Inc. in El Paso, Texas.
Manufacture of automotive hoses. Products include air conditioning hose, air conditioning hose assemblies and high pressure power steering hose.
Nyloncraft, Inc. in Mishawaka, Indiana.
A provider of dual plastic automotive applications, interior/exterior functional parts, vacuum manifold assemblies, air-ride suspension components, metal to plastic conversions. Capabilities include SDRC - IDEAS, AutoCAD, Unigraphics, Moldflow, and FEA.
Parker Hannifin Corporation in Cleveland, Ohio.
A manufacturer of pneumatic, fluid connector, hydraulic, filtration and seal technology products.
Powers and Sons LLC in Montpelier, Ohio.
A manufacturer of automotive steering linkages including forgings, linkage components, idler arms, tie rod ends, track bars, and pitman arms. Capabilities also include full engineering, design and testing.
TechRim Standards, LLC in Auburn Hills, Michigan.
An international automotive component supplier. Manufacturing capabilities include production of door hinges, brackets, strikers, pin and receivers, fittings, investment and shell castings, magnesium and aluminum die castings, rubber hoses and other rubber molding products. High volume production and assembly.
THK Rhythm Automotive Michigan Corporation in Portland, Michigan.
Capabilities include draglinks, tie rods and steering linkages.
THK Rhythm North America Company, Ltd. in Novi, Michigan.
Site activities include market research, benchmarking, design support and sales for suspension ball joints, aluminum suspension links, steering tie rods and stabilizer connecting rods.
THK Rhythm North America Company, Ltd. in Sparta, Tennessee.
A supplier of suspension ball joints, aluminum suspension links, steering tie rods and stabilizer connecting rods.
Trelleborg Automotive Americas in South Haven, Michigan.
A provider of vehicle anti-vibration and acoustic management services. Products include systems for engine mounting, suspension, exhaust, fluid circulation, impact protection, brake shims and flexible boots.
U.S. Farathane Corporation in Sterling Heights, Michigan.
A custom molder of plastic in standard, insert, shuttle and rotary two-shot (dual durometer) injection processes and cast PVC. Simple assembly, automation, hot plate weld and other value added services. Black box design capable, also custom compounder of thermoplastic urethane resins. Also manufactures micro-cellular urethane components using Autothane MDI compound.
Usui International Corporation in Plymouth, Michigan.
A supplier of plastic fans, fan drives, high pressure fuel injection tubes for diesel engines, steel pipe push rods, brake tubes, fuel tubes, and tube plating, etc.
Windsor Machine & Stamping Ltd. in LaSalle, Ontario.
Designs, engineers and integrates headrest frames and assemblies using wire products, tubular components, stampings, foam, fabric and plastic parts to produce assembled headrests. Other products include seating components, upper and lower exhaust hangers and assemblies, modular assemblies, structural brackets and braces.
Winzeler Stamping Company in Montpelier, Ohio.
A metal stamper. Products include clamps, brackets, hose connectors, cans, caps, tanks, sleeves, shells, inserts, accumulators, receivers/driers, deflectors, housings, ferrules, etc. Automotive application areas include fuel delivery systems, fuel rail components, steering system components, steering linkage systems, power brake components, engine cooling system components, HVAC components, and NVH components, etc. Materials capabilities include stainless steel, carbon steels, HSLA Steel, aluminum, brass, bronze, copper, and other specialty alloys.
Young Technology, Inc. in Addison, Illinois.
A designer, manufacturer and importer of automotive and motor industry components including leather wrapped components, shifter system components, oil seals, bearing components, motor laminations, molded rubber, molded plastic components, forged and formed steel components.
ZF TRW North America in Lafayette, Indiana.
A supplier of steering gears & pumps, steering columns & linkages, and Putnam arms.
ZF TRW North America in Livonia, Michigan.
Products include active & passive safety systems.