Suppliers of vehicle interior headliner systems and related components.
Adient, Ltd. in Plymouth, Michigan.
A provider of automotive systems and facility management and control. Products include seating and interior systems such as seats, overhead, door, instrument panels, trim, storage and batteries.
Ahlstrom Nonwovens, LLC in Windsor Locks, Connecticut.
A supplier of fiber nonwoven and reinforcement composites. Uses include engine filtration, headliners, in-mold, acoustic and natural fibre applications.
American Howa Kentucky, Inc. in Bowling Green, Kentucky.
A manufacturer of dash insulators, sunshades, headliners and other interior products for the automotive industry.
Autoneum Canada, Ltd. in Tillsonburg, Ontario.
Products include manufactures automotive noise reduction and heat shield components.
Autoneum North America, Inc. in Farmington Hills, Michigan.
A supplier of noise control and thermal insulation systems. Products include dampers, acoustic systems, interior trim, and thermal management systems.
AVINTIV, Inc. in Old Hickory, Tennessee.
A supplier of high performance, speciality nonwoven fabrics. Produces polyester and polypropylene products for use in automotive interior applications such as seating & interior trim, headliner & trunk liner composites, foam seat backing for decorative stitching, high strength seat reinforcement, surface preparation wipes and bonding agents.
Cerex Advanced Fabrics, Inc. in Pensacola, Florida.
A manufacturer of spunbond nylon specialty nonwoven fabrics.
Commercial Vehicle Group, Inc. in New Albany, Ohio.
Services include the design and manufacture of suspension seats systems, interior trim systems (including instrument and door panels, headliners, cabinetry, molded products and floor systems), cab structures and components, mirrors, wiper systems, electronic wiring harness assemblies and controls and switches for heavy-duty trucks and commercial vehicles.
Continental Structural Plastics, Inc. in Lenoir, North Carolina.
A supplier of exterior and interior systems. Designs, engineers and manufactures front- and rear-end fascia systems; sealing systems; exterior trim; composite panels; top systems; engineered glass; underhood and underbody components; structural components; sidewall and trim systems; cockpit systems; cargo management systems; overhead systems; and carpet and loadspace systems
ContiTech North America, Inc. in Montvale, New Jersey.
A supplier of air spring systems, elastomer coatings, fuel hoses, hoses and hose assemblies for heating/cooling systems, belt drive systems and vibration control products.
Conversion Technologies International, Inc. in West Unity, Ohio.
Offers adhesive coating, adhesive laminating, sheeting, and die cutting for the automotive and other industries. Coatings provided include hot melts, pressure-sensitive hot melts, water base coatings, adhesive films, webs, scatter/powder adhesive coatings, transfer adhesives, and spray adhesives.
Daehan Solution Alabama, LLC in Hope Hull, Alabama.
A supplier of noise, vibration & harshness (NVH) related components such as headliners.
Dakkota Integrated Systems, LLC in Chicago, Illinois.
Site capabilities include overhead assembly systems, fascia assembly systems, component & system sequencing.
Dakkota Integrated Systems, LLC in Brownstown, Michigan.
Site capabilities include overhead systems, material and component sequencing, etc.
Duro Textiles, LLC in Fall River, Massachusetts.
A supplier of adhesive-coated fabrics for industrial and automotive applications. Services include the processing of customer-supplied woven or nonwoven fabrics up to a width of 120". Capabilities include applying adhesive coatings via a variety of methods. Coatings include polyester, polyethylene, polyamides, and blends. Services include slitting and sheeting.
Dynic USA Corporation in Hillsboro, Oregon.
A supplier of cabin air filter media, head and trunk liner material, and label materials for seatbelts and airbags.
FICOSA North America Corporation in Madison Heights, Michigan.
A provider of automotive systems and components such as rear-view systems (interiors and external), gear shift systems (automatic and manual), parking control systems (hand brake manual or electrical), command and control cables, systems for seats and doors, pedals, windscreen and headlamp washer systems, air tubes, tanks for water and liquid brakes, sun visors, steering column & starter locks as well as closing and locking systems.
Freudenberg Nonwovens North America in Durham, North Carolina.
A supplier of nonwoven fabrics to the automotive industry. Produces A, B, C column padding; backing for tufted carpeting; battery separators; bodywork parts; cabin air filters; car mats; carburetor filters; carpet and carpet reinforcement; decorative fabric; door panel trim; door trim facing fabrics; filters in production process; headliner backings; headliner covering; headliner facings; headliner substrates; hood liners; insulation materials; molded fuel tanks; molded trunk liners; muffler; polyurethane coated backing; rear shelf panels; seat bolster fabrics; seat covers; seat slip agents; sound proofing; sun visor material; trunk floor covering; trunk liners; upholstery backing; and vinyl backing for seat covers.
FXI - Foamex Innovations in Novi, Michigan.
A polyurethane foam producer for automotive seating, headliner, door panel, and carpet applications.
FXI - Foamex Innovations in Media, Pennslyvania.
A supplier of polyurethane foam cushioning products. Applications include dashboards, interiors, seats, noise and vibration reduction and filtration media.
Grupo Antolin Kentucky, Inc. in Hopkinsville, Kentucky.
Provides overhead systems for automobiles. Products include headliners.
Grupo Antolin North America, Inc. in Auburn Hills, Michigan.
Products include door and seat components as well as overhead systems such as headliners.
Grupo Antolin North America, Inc. in Canton Township, Michigan.
A manufacturer and supplier of headliner and interior components.
Grupo Antolin North America, Inc. in Howell, Michigan.
A provider of seating systems and specialty seat mechanisms. Other products include cockpit modules, overhead and sidewall systems, carpets and acoustic systems, cargo management systems as well as complete vehicle interiors.
Hayashi Telempu North America in Lebanon, Ohio.
Heartland Automotive, LLC in Greencastle, Illinois.
A supplier of interior and exterior automotive components. Products include plastic molded, painted and and assembled parts such as instrument panels, door panels, consoles, pillars, head liners, aprons and rear gates and exterior cladding.
Innertech - Nashville in Nashville, Illinois.
Produces headliners and trunk components.
INOAC USA, Inc. in Troy, Michigan.
Specializes in polymer plastics, rubber and foam fabrication for interior, exterior and under-hood components including instrument panels, consoles, headrests, armrests, rear spoilers, body-side moldings, roof rails, window moldings, HVAC foam seals, headliner EA cushions, interior cushioning, foam air-filters, etc.
International Automotive Components Group North America, LLC in Madisonville, Kentucky.
Produces plastic automotive components and head liners.
International Automotive Components Group North America, LLC in Plymouth, Michigan.
A supplier of automotive cockpit modules and floor and acoustic systems and as well as instrument panels, plastic-based trim, and convertible top systems.
International Automotive Components Group North America, LLC in Port Huron, Michigan.
Manufactures automotive headliners.
International Automotive Components Group North America, LLC in Southfield, Michigan.
Supplies door & trim systems (hard, semi-soft & soft door panels, decorative vinyl & cloth-covered inserts, appliqués, armrests, speaker grilles, switch plates, map pockets, energy-absorbing safety items, sound deadening parts, etc.); cockpit systems (hard, soft-feel & sewn leather IPs, air distribution ducts/outlets, glove boxes, decorative appliqués & plastic trim, injection molded side panels, painted decorative parts, leather wrapped armrests); flooring (floor consoles, trim, rear package trays, floor mats, trunk trim, dash & engine noise insulation including non-woven & woven carpet, sound barrier & acoustic components, Barium sulfate acoustic insulation, etc.); headliner & modular overhead systems (consoles, formable rigid urethane headliner substrates, grab handles, visors, energy management brackets & lamps); cargo management (compression molded honeycomb/polypropylene load floors); interior garnish trim & exterior components (fenders, bumpers, rocker panels/door sills & cowl grilles, etc.).
ITW Deltar Fuel Systems Division in Mokena, Illinois.
A manufacturer and designer of insert molded products for automotive applications such as molded lead frames, electronic packaging, sensor housings, molded circuit board replacements, and connector systems.
Kasai North America, Inc. in Manchester, Tennessee.
Manufactures injection molded automotive parts such as door trim panels, rear shelf, trunk trim, dash insulators and plastic injection trim.
Kautex Textron in Troy, Michigan.
A supplier of instrument panels, door panels, armrests, airbag doors, center consoles, headliners, exterior trim, lighting, iron castings, camshafts, fuel tank systems, fuel filter assemblies, windshield and headlamp washing systems, seating comfort systems, machine tools, components and assembly systems for the automotive market.
Lauren Plastics, LLC in Spring Lake, Michigan.
A manufacturer of extruded seals for both interior/exterior and under-hood applications. Products include windshield seals, air deflectors, radiator seals, hood seals and various gimp seals as well as tri extrusions for below belt glass run channels, seating clips and headliner protectors, extruded electronic module covers and wire raceways, tri-extruded multi-material parts for in-door and under-hood sealing applications.
Lear Corporation in Southfield, Michigan.
A supplier of seating, interior and electronic/electrical automotive components. The seating segment includes seat systems and components, the interior segment includes instrument panels and cockpit systems, overhead systems, door panels, flooring and acoustic systems, etc., the electronic/electrical segment includes electronic products and electrical distribution systems such as wire harnesses and junction boxes; interior control and entertainment systems; and wireless systems.
Magna Exteriors and Interiors in Concord, Ontario.
A supplier of exterior and interior systems. Other products include cockpit modules, overhead and sidewall systems, carpets and acoustic systems, cargo management systems as well as complete vehicle interiors.
Magna International, Inc. in Aurora, Ontario.
A supplier of automotive systems, assemblies, modules and components. Capabilities include the design, engineering, testing and manufacture of automotive interior systems; seating systems; closure systems; body and chassis systems; vision systems; electronic systems; hybrid & electric vehicles/systems; exterior systems; powertrain systems; roof systems; as well as complete vehicle engineering and assembly.
Magna Mirrors North America, Inc. in Holland, Michigan.
A supplier of mirror systems, window systems, door handles, and electronics.
M&C Specialties Company in Southampton, Pennsylvania.
A die-cutter/converter of 3M automotive tapes, acrylic tapes, VHB products, BSR products, anti-squeak flocking, laminations, sound and vibration control products, and paint masking tapes. Applications include exterior and interior trim attachments, emblem attachment, anti-mutilation, surface protection films, shielding and conduction, anti-squeak, gaskets, under-hood labels, heat abatement, dual lock fastening, pressure sensitive adhesion, fabrics, and foams, etc.
Nolar Industries Limited in Concord, Ontario.
A supplier of automotive nonwoven fabrics and fabric scrim. Applications include seating support fabrics, airbag drapes/skirts, hood liners and headliners. Specalizes in polypropylene, polyester, and blended fabrics in all types of web formations, eg. (pointbond, spunbond, resinbond, etc.). Capabilities include coating, laminating and sintered powder.
NSU Corporation in Lebanon, Kentucky.
A supplier of muffler component parts, fiberglass for headliners as well as substrate board, etc.
Oji Intertech, Inc. in North Manchester, Indiana.
A supplier of automotive air ducts, headliners, structural membranes, laminated products, die-cut products, etc.
Owens-Corning Automotive in Novi, Michigan.
Develops solutions for automotive applications in the areas of closures, structures and interior/exterior acoustics. Products include acoustical and structural materials, headliner substrate, glass reinforcements and sheet molded compound body panels.
Polymer Technologies, Inc. in Newark, Delaware.
A manufacturer and supplier of acoustical composites for the control of noise and structural vibration. Capabilities include foam fabrication, waterjet cutting, molding. Automotive applications include HVAC, engine compartments, flooring, firewalls and body shells.
Qualtech Seating Systems in London, Ontario.
A supplier of seating systems as well as headliners.
RCO Engineering, Inc. in Roseville, Michigan.
A provider of whole vehicle, total product development, design and engineering services. Capabilities include interior and exterior plastic trim components, tools and parts; 3-D design services; seat development (foam, trim, plastic and metal); low volume production; aluminum injection mold tooling and production; wire harness development; and contract labor placements.
RPK Mexico S.A. de C.V. in Celaya, Guanajuato.
A manufacturer of springs, wire forms and copper coils for the automotive industry.
Sekisui Voltek, LLC in Lawrence, Massachusetts.
A supplier of cross linked, closed-cell polyolefin foams. Automotive applications include headliners & interior trim, gaskets, vacuum forming, low pressure molding and watershields, etc.
Seoyon e-Hwa Interior Systems Alabama, LLC in Selma, Alabama.
Products include door trim, seats, head linings and other interior vehicle parts.
Seoyon e-Hwa Interior Systems Georgia, Inc. in LaGrange, Georgia.
A supplier of door & pillar trim, head liners, package trays, screen assemblies, etc.
Shawmut Corporation in West Bridgewater, Massachusetts.
A supplier of engineered composite materials such as foam-in-place laminates. Applications include headliners, body cloths, door panels, foam-in-place and low pressure injection molded components.
Shawmut Corporation in Plymouth, Michigan.
A supplier of engineered composite materials. Applications include laminates for headliners, body cloths, door panels, foam-in-place and low pressure injection molded components. Also provides die cut and molded parts for door trim, load floor and other interior trim applications.
The Haartz Corporation in Bloomfield Hills, Michigan.
A supplier of sport-utility and convertible top fabrics and moldable interior trim materials.
The Woodbridge Group in Troy, Michigan.
A manufacturer of polyurethane foam products such as seating foam, safety energy-absorbing (EA) foam, acoustical foam, headliner foam and laminate foams.
Trybus, Inc. in Livonia, Michigan.
Provides automotive seating design & development, CNC milling, pattern digitizing & cutting, prototype seat & foam development, production pattern development, soft trim, foam skiving, metal fabrication, wood fabrication & production sewing.
TS Tech North America, Inc. in Reynoldsburg, Ohio.
Provides research & development services, manufacturing and delivery of complete automotive interior systems, including seats, roof and door liners.
UGN, Inc. in Tinley Park, Illinois.
A supplier of acoustic, interior trim and thermal management products such as interior carpets, dash insulators, dampers, headliners, rear shelf panels, absorbers as well as special application products.