Automotive manufacturers supplying gaskets and seals.
3M Company in Indianapolis, Indiana.
Provides elastomers for shock, vibration, noise and cushioning applications including acoustical absorption and barrier, damping, isolation, sealing and gasketing.
ACS Industries, Inc. in Lincoln, Rhode Island.
Products include filters and diffusers for airbag inflators and gaskets as well as wire mesh components for engine exhaust systems.
Ainak, Inc. in Winchester, Kentucky.
Specializes in rubber products, including general and precision molding products, functional seals, diaphragms, grommets, boots, o-rings, and bushings. Also supplies thermoplastic molding parts, rubber, sponge, and polyurethane foam products.
Alto Products Corporation in Atmore, Alabama.
A manufacturer of clutch plates and automatic transmission parts including friction and steel plates. Capabilities include complete design and manufacturing of bonded friction materials, stamped steel separator reaction discs, brake bands and gasket & seal kits as well as bonding, stamping, engineering, in-house tooling, and design services.
American National Rubber Company in Ceredo, West Virginia.
A supplier of automotive rubber seals and gaskets.
American Ring & Tool Company in Solon, Ohio.
A supplier of rings, springs, pins, quarter turn fasteners, etc.
AmesburyTruth in Rochester, New York.
A supplier of urethane foam, plastic and textile weatherstripping. Automotive applications include edge trim, sliding window flexible channel, spray suppressants for fleet trailers, textile seals and woven Teflon filament sway bar bushing liners.
Amorim Cork Composites, Inc. in Trevor, Wisconsin.
A manufacturer of soft gaskets for engine, transmission, and axle applications. Products include cork rubber materials for gasket fabrication.
Apple Rubber Products, Inc. in Lancaster, New York.
A manufacturer of o-ring seals. Capabilities include transfer molding, compression molding, liquid injection molding (LIM), CNC machining and proprietary bonding processes. Products include u-cups, wipers, piston rings, bushings, packings, o-rings, etc.
Apple Rubber Products, Inc. in Lancaster, New York.
A manufacturer of o-ring seals. Capabilities include transfer molding, compression molding, liquid injection molding (LIM), CNC machining and proprietary bonding processes.
Applied Industrial Technologies in Cleveland, Ohio.
Distributors of bearings, linear technologies, power transmission components, rubber products, specialty maintenance items and electrical/mechanical and fluid power products and systems for the MRO (maintenance and repair operations) and OEM markets.
Avery Dennison Corporation in Painesville, Ohio.
A supplier of acrylic, rubber and silicone-based adhesive tapes for heater ducts, engine & underhood, foam, gasketing, IP seals, interior and exterior applications, bolsters, headliners, carpeting, exterior bonding, mirror housing and brake shims as well as NVH components, including anti-squeak/BSR components and constrained layer vibration damping products.
Bostik, Inc. in Wauwatosa, Wisconsin.
Provides adhesives and sealants for acoustic, bonding, reinforcing and other applications from body in white through the paint shop and trim area. Application areas include headliners, seating, instrument panels & consols, doors, watershields, package trays & trunk liners, weatherstripping, etc.
BRC Rubber & Plastics, Inc. in Fort Wayne, Indiana.
A molder of rubber products with applications in automotive engine and body sealing as well as chassis and suspension systems. Development capabilities include CAD engineering, rubber formulation development, and custom tool design. Products include spring pads.
Brickham Stamping Company, Inc. in Oshkosh, Wisconsin.
A supplier of shims and metal stampings.
Bruss North America, Inc. in Russell Springs, Kentucky.
A manufacturer of valve covers, pan gaskets, bonded pistons, thermoplastic cam cover modules and a variety of rotary shaft seals.
Canada Rubber Group, Inc. in Bowmanville, Ontario.
A supplier of rubber molded pedal pads, stop bumpers, grommets, tubing, o-rings, radiator gaskets. Services include custom die cutting of sheet, sponge, foam gaskets and seals.
Chemque, Inc. in Rexdale, Ontario.
A manufacturer of specialty high performance polymers. Products are primarily two-component or moisture curing systems, including epoxy, polyurethane, silicone, hybrid resins as well a patented foam-in-place gasketing technology. These polymers are used for adhesives, clear coating trim, BSR abatement, electronic potting/encapsulation and foam-in-place gasketing.
Coi Rubber Products, Inc. in City of Industry, California.
A manufacturer of molded rubber and plastic components.
ContiTech North America, Inc. in Montvale, New Jersey.
A supplier of air spring systems, elastomer coatings, fuel hoses, hoses and hose assemblies for heating/cooling systems, belt drive systems and vibration control products.
Cooper-Standard Automotive, Inc. in Auburn Hills, Michigan.
A manufacturer of sealing system products, fluid systems, vibration control applications and other related items.
Cooper-Standard Automotive, Inc. in Novi, Michigan.
A global manufacturer of sealing system products, fluid system products, and noise, vibration, and harshness control products, and other related products.
Creative Foam Corporation in Fenton, Michigan.
A fabricator of cellular plastic automotive parts. Fabricating processes include die cut, compression, fusion and vacuum forming. Also supplies parts with adhesive applied and parts which have assembled fasteners. Capabilities include design services.
Dana Holding Corporation in Lisle, Illinois.
Sealing systems utilizing engineered gaskets, heat shields, valve stem seals, and other sealing components. Design, analysis, and manufacture of products from various materials, featuring multi-layer steel gaskets. Dyno testing, FEA, and compatible CAD software.
Dana Holding Corporation in Danville, Kentucky.
Produces diesel & gas engine gaskets.
Dana Holding Corporation in Maumee, Ohio.
A supplier of axles; driveshafts; vehicle architecture; chassis, steering, and suspension products; sealing, thermal management, fluid transfer, and engine power products; systems assembly, management, and integration services; and related service parts.
DATA2 Corporation in St. Louis, Missouri.
Provides solutions for applications involving precision die-cut parts, preprinted bar code labels and blank labels. Products include attachment tape die-cuts with extended liner tabs, BSR die-cut foams, foam gaskets, and die-cut flexible parts and labels. Automotive applications include ID solutions for tire manufacturing.
Derby Fabricating, LLC in Louisville, Kentucky.
A supplier of die cut automotive parts. Applications include A, B, C pillar insulation; air seals; arm rest and console pads; bin mats; buzz, squeak & rattle (BSR) control; carpet inserts; cowl seals; cup holder components; door panel insulation; dust seals; engine cover insulation; headliner insulation; impact absorbing foam blocks; spoiler and trim tapes; vent seals and vent flaps; and water seals, etc. Capabilities include die cutting, assemblies, laminating, laser die burning, packaging, rewinding, slitting, etc.
Derby Fabricating Solutions in Cadiz, Kentucky.
A supplier of automotive rubber seals, gaskets, spacers, etc.
Dia•Com Corporation in Amherst, New Hampshire.
Specializes in the manufacturer of molded elastomer diaphragm seals and fabric reinforced seals.
Dorrie International in Norwalk, Connecticut.
A supplier of interior and exterior laminated products for trim and sealing applications such as engineered materials that seal vehicle windows and doors.
Dow Automotive in Auburn Hills, Michigan.
A supplier of acoustical and thermal management systems, structural enhancement systems, structural and acoustical foams, glass bonding systems, sealing systems, structural adhesives, reinforcing composites, injection-molded dash mats, injection-molded engine covers and barriers, damping and sound absorption, etc.
DuPont Automotive Systems in Troy, Michigan.
A supplier of DuPont™ Suva® brand 134a automotive refrigerant as well as performance coatings, specialty fibers, specialty polymers including automotive coatings (paints), transparent sheeting for laminating safety glass, engineering polymers and fibers such as glass-reinforced nylon for air intake manifolds, aramid fibers, material for engine mounts and air springs, various seals, upholstery fabrics and resins for noise barrier applications in door panels.
DynaPlas Ltd. in Scarborough, Ontario.
Produces precision injection molded thermoplastic components, focusing on high temperature, tight tolerance, engineered resin products. Expertise in insert and overmolding. Products include fuel systems and braking parts; gears and housings; insert bearings/thrust washers; pullyes; braking control modules; connectors, seals, housings and caps; as well as electronic module cases.
E & I, Inc. in Tallassee, Alabama.
A supplier of adhesives and sealants. Products include mastics, mastic sealers, hemming sealers, PVC oil sealers, spot weld sealers, PVC undercoating, foam PVC undercoating, PVC body sealers, body PNL reinformcements, foamed deadeners, structural reinforcement pads, etc.
EFTEC North America, LLC in Taylor, Michigan.
Designs and manufactures PVC-based sealants, adhesives, and coatings, water based coatings, epoxy-based adhesives and urethane-based sealants, adhesives and coatings.
EKK Eagle Sales America, Inc. in Farmington Hills, Michigan.
A manufacturer of mechanical seals, lip seals and special valves.
Elring Klinger Canada, Inc. in Leamington, Ontario.
A full service supplier of sealing systems. Specializes in covers such as timing chain covers and for other underhood sealing applications. Systems capabilities include covers, gaskets, seals, grommets, fasteners and ancillaries.
Elring Klinger Sealing Systems USA, Inc. in Plymouth, Michigan.
A supplier of cylinder-head and special-purpose gaskets, cover modules and shielding parts for the powertrain and exhaust systems. Services include engine testing.
Excelsior, Inc. in Rockford, Illinois.
A custom manufacturer and distributor of gaskets, packings, washers, o-rings, and seals. Materials used include rubber, foam, cork, asbestos substitutes, leather, plastic, etc.
Federal-Mogul Corporation in Skokie, Illinois.
Produces gaskets and designs from copper, graphite, soft composite materials, rubber-coated metals, silicones, molded-rubber products, cork rubber, laminated metals, multi-layer steel and other materials. Products include gaskets for passenger car and heavy-duty engine applications, cylinder head gaskets, intake manifold gaskets, exhaust manifold gaskets, timing covers, oil pan gaskets and valve covers, etc. Operations include manufacturing, distribution, product design and engineering, materials development and product testing.
Federal-Mogul Corporation in Frankfort, Indiana.
Manufactures radial lip oil seals, transmission seals and grease seals as well as Unipistons sealing products. Produces rubber polymer.
Federal-Mogul Corporation in Ann Arbor, Michigan.
Activities include oil seal and gasket technology testing and development.
Federal-Mogul Corporation in Plymouth, Michigan.
Site activities include testing for vehicle manufacturers as well as small-engine manufacturers. Testing capabilities include gasoline, diesel, and E-85 fuels.
Federal-Mogul Corporation in Southfield, Michigan.
A global supplier of automotive components, systems and modules serving OEMs and the aftermarket. Powertrain Energy (PTE) segment: pistons, rings, pins, liners, valve train and ignition components. Powertrain Sealing and Bearings (PTSB) segment: seals, gaskets, bearings, bushings, heat shields and transmission components. Vehicle Safety and Protection (VSP) segment: brake activities, chassis products, lighting, wipers and systems protection technologies. Global Aftermarket (GA) segment: replacement products for automotive and commercial vehicles.
Federal-Mogul Corporation in Van Wert, Ohio.
Manufactures oil seals and wear rings.
Flow Dry Technology, Inc. in Brookville, Ohio.
A manufacturer of laminated composite gaskets, non-metallic stampings, advanced fiber gaskets, rubber coated steel gaskets, high temperature gaskets and miscellaneous die cut parts. Capabilities include full-service in house tooling and prototyping.
Freeway Corporation in Cleveland, Ohio.
A manufacturer of automotive washers, metal stampings, multi-component & ball-bearing assemblies and other precision machined components. Secondary capabilities include stamping, machining, reaming, broaching, washing, turning, deburring, grinding, tapping, heat-treating, plating, riveting, drilling, etc.
Freudenberg-NOK General Partnership in Plymouth, Michigan.
Powertrain products including engine and transmission sealing products, air/fuel delivery modules, noise, vibration and harshness (NVH) modules. Chassis products including NVH modules, suspension components, bushings and mounts, axle and bearing seals, rubber, plastic and PTFE components for steering, brake, electrical and fuel packages.
Freudenberg-NOK Sealing Technologies in Cleveland, Georgia.
A supplier of elastomeric and custom formulated seals. Automotive application areas include engine, turbocharging, fuel, transmission, driveline, steering, suspension, climate, electrification, and brakes.
Freudenberg-NOK Sealing Technologies in LaGrange, Georgia.
Fukoku South Carolina, Inc. in Laurens, South Carolina.
Products include moving core valves, CVJ boots, brake parts, and radiator seals, etc.
Garlock Sealing Technologies in Palmyra, New York.
Specializes in fluid sealing technology. Products include gasketing, valve and pump packing, oil seals, mechanical seals, expansion joints, hydraulic and pneumatic seals, and molded rubber products.
Gaska Tape, Inc. in Elkhart, Indiana.
Manufactures patented polymeric series foam tape. Provides gasketing material to control buzz, rattle, and squeak issues. Applications include outside mirrors, dashboards, quarter windows, spoilers, tail lights, door protectors, waist line molding, wheel caps and license plates.
Gasket Engineering Company in Kansas City, Missouri.
A supplier of rotary and flat bed die-cut gaskets and seals.
GDC, Inc. in Goshen, Indiana.
Services include the custom fabrication of gaskets, seals and other products made of foam, rubber, plastic, textiles, paperboard and light metals. Products include radiator baffles, splash shields, truck bed mats, and mud flaps, etc.
GITS Manufacturing Company in Creston, Iowa.
A supplier of oil hole covers, oil cups, brush oilers, tubing clips, shift seals, and drum & tank gauges.
GrafTech International Holdings, Inc. in Lakewood, Ohio.
A supplier of flexible graphite sealing and thermal solutions for internal combustion, electronic and fuel cell applications. Automotive applications include head gaskets, exhaust gaskets, throttle body gaskets, EFT gaskets for heat shields, squeak/rattle isolators, heat spreaders, GDL substrates and flow field plate components.
Greene Rubber Company, Inc. in Woburn, Massachusetts.
A manufacturer of custom fabricated and molded rubber. Products include rubber seals, vibration isolators, gaskets, EMI/RFI materials, O-rings, bumpers, grommets, etc.
Green Tokai Company, Ltd. in Maysville, Kentucky.
Produces plastic weather stripping, inner moldings, outer belt moldings and roof moldings.
Henniges Automotive North America, Inc. in Auburn Hills, Michigan.
A sealing solutions provider specializing in isolation of vehicle interior systems from outside environments to eliminate wind noise, water leaks and emission intrusion. Product areas include sealing, encapsulated glass systems and vibration control. Applications include doors, windows, trunks, liftgates, sunroofs and hoods.
Holley Performance Products, Inc. in Bowling Green, Kentucky.
Products include carburetors, fuel pumps, pressure regulators, fuel injection components, intake manifolds, and cylinder heads, etc.
Hollingsworth & Vose Company in East Walpole, Massachusetts.
Providers of products with applications in engine filtration, air and liquid filtration, battery separators, gasket materials, air bag media, and specialty and industrial nonwovens.
Hoosier Gasket Corporation in Indianapolis, Indiana.
A supplier of die-cut gaskets, beeded gaskets, edge-molded rubber gaskets, metal gaskets, rubber-edge composite gaskets, composite materials on metal core gaskets, pressure-sensitive adhesive/hot melt gaskets, and custom gaskets.
Hutchinson Antivibration Systems, Inc. in Cadillac, Michigan.
A supplier of vibration and acoustic insulation systems, dynamic sealing and magnetic encoding for the automotive and other industries.
Hutchinson North America in Celaya, Guanajuato.
A supplier of seals and hoses.
Hutchinson North America in Auburn Hills, Michigan.
A supplier of under-hood air conditioning tube and hose assemblies.
Hutchinson North America in Church Hill, Tennessee.
Manufactures rubber automotive products such as gaskets, seals, etc. Automotive application areas include air intake, fuel circuit, ignition, filtration, lubrication, engine and engine suspension, brakes, body liaison, steering, body, interior, engine cooling, drivetrain, and air conditioning.
Hutchinson North America in Wytheville, Virginia.
A supplier of body sealing systems.
IER Fujikura, Inc. in Macedonia, Ohio.
A manufacturer of high precision, custom molded elastomer seals using over 20 different base polymers with in-house formulation and mixing capabilities. Specialties include fluorinated elastomers. Capabilities include engineering support. Automotive applications include elastomer seals and parts for fuel systems emission controls, air management systems, brake systems, safety devices, electrical connectors, climate control, etc. (ORVR seals, EGR diaphragms, rollover valves, pump cups, air bags seals, air valves, thermostat components, needles, canister purge solenoids, etc.).
Industry Products Company in Piqua, Ohio.
A manufacturer of cargo and trunk area systems, acoustic watershields, die cut components for acoustic insulation, substrate, and sealing applications for the automotive industry.
Interface Performance Materials in Northville, Michigan.
A manufacturer of automotive gaskets and seals for drivetrain applications.
Interface Performance Materials in Lancaster, Pennsylvania.
A supplier of advanced sealing solutions, felt, and engineered composite materials. Products include automotive gaskets and seals.
Interface Sealing Solutions in Marshalltown, Iowa.
A sealing solutions provider. Applications include automotive, heavy-duty diesel and other related industries. Products include gasket materials, rubber-edged composites, alternative sealing technologies, and die-cut parts.
Jaeger-Unitek Sealing Solutions, Inc. in LaPorte, Indiana.
A manufacturer of automotive seals. Applications include trunks, windows, doors etc. Provides rubber and thermoplastics parts including diecut, molded, co-molded, extruded and co-extruded, and vacuum forms PP and metallocine.
Jamak Fabrication, Inc. in Weatherford, Texas.
Provides molded and extruded products, including various automotive engine seals and sealing systems. Facilities include an on-site center for design, development and testing. Services include commodity management programs for all sealing and gasketing applications through an industrial distribution group.
John Crane, Inc. in Morton Grove, Illinois.
A designer, manufacturer, and supplier of engineered sealing systems, solutions, and associated products including engineered mechanical seals, mechanical packing, and sealing support systems, as well as power transmission couplings and centralized lubrication systems.
Kent Manufacturing Company in Grand Rapids, Michigan.
A converter (laminating, slitting, die cutting) of adhesive coated materials. Automotive interior applications include bolster fabric attachments, carpet attachments, seat frames, storage compartment foam cushions, sunroof fabric attachments, rear view mirrors, and vanity mirrors.
KITAGAWA Industries America, Inc. in San Jose, California.
A supplier of heat gasket shields, ferrites, EMI noise absorption sheets and grounding contacts.
KN Rubber, LLC in Toronto, Ontario.
Products include rubber and plastic quarter panel shields, steering shaft seals, door check seals, cowl drain seals, brake pedal pads, upper deflectors/beauty shields, hood seals, top radiator seals, engine closeout panels, air inlet ducts, fuel tank filler seals, wheel splash shields, front/rear mudguards, stone shields, suspension spring seats, gas tank pads, lower air deflectors, bottom radiator seals, front air dams, underbody aero shields, compressor shields, side air deflectors, air conditioner condenser seals, headlamp seals, battery trays, license plate brackets, etc.
Kokoku Rubber, Inc. in Schaumberg, Illinois.
A manufacturer of rubber parts and components. Automotive applications include diaphragms for carburetors, brakes and EGRs; valves for fuel control and exhaust gas control; fuel tubes, vacuum hoses, air suction tubes; carburetor floats; oil filter gaskets, cylinder head covers; piston boots, piston seals, rubber bushings for brakes; weather-stripping, trunk lid seals; mandrel-formed hoses; gas tank seals, fuel pump covers, etc.
Kotek America, Inc. in Irvine, California.
A manufacturer of rubber and engineered plastic products including rack & pinion components, power steering components, disc brake caliper components, C.V. axle components and joints, O-rings, oil seals, rubber boots, and bushings.
Kyocera Industrial Ceramics Corporation in Vancouver, Washington.
A supplier of ceramic components for automotive and other applications. Products include various ceramic engine components, cam rollers, seals, glow plugs, and silicon nitride heaters for oxygen sensors, insulators, gas turbine components and aluminum foundry and die-casting related products.
L&L Products, Inc. in Romeo, Michigan.
A provider of engineered acoustic, sealing, anti-flutter and structural materials.
Lauren Manufacturing in New Philadelphia, Ohio.
A custom extrusion company specializing in closed-cell sponge and dense polymer products such as extruded seals, gaskets and weather-stripping. Capabilities include lamination with a pressure sensitive adhesive system.
Magna Closures, Inc. in Newmarket, Ontario.
A supplier of latching systems, hinges & wire formed components, power closure systems, electronics, door modules, window systems, engineered glass systems, sealing, trim, roof racks, roof systems, running boards, etc.
M&C Specialties Company in Southampton, Pennsylvania.
A die-cutter/converter of 3M automotive tapes, acrylic tapes, VHB products, BSR products, anti-squeak flocking, laminations, sound and vibration control products, and paint masking tapes. Applications include exterior and interior trim attachments, emblem attachment, anti-mutilation, surface protection films, shielding and conduction, anti-squeak, gaskets, under-hood labels, heat abatement, dual lock fastening, pressure sensitive adhesion, fabrics, and foams, etc.
Mantaline Corporation in Mantua, Ohio.
A provider of customized engineered sealing solutions through extruded and molded elastomers. Applications include gaskets & seals, metal on rubber, cushions, weatherstripping, trim edges, etc.
Marimba Auto, LLC in Belleville, Michigan.
A provider of tubing solutions for the automotive and other industries. Products include brass, copper, aluminum, stainless steel, seamless, mandrel drawn, and electric resistance welded tubes. Other products include aluminum and iron castings, forgings, stampings, braking seals, steering couplings, hydrulic and suspension bushes, bearing seals, plastic molded parts, and hoses, etc.
Metal Textiles Corporation in Edison, New Jersey.
A manufacturer of wire mesh products including exhaust seals, gaskets, catalytic converter support mesh, end support rings and spherical ball joint systems. Applications include mufflers, catalytic converters air & fuel filters, air bags, compressors, and fuel injection, etc.
Meteor Sealing Systems, LLC in Dover, Ohio.
A provider of automotive sealing solutions. Services include designing, developing and producing complex sealing systems. Applications range from door seals to complete vehicle sealing systems.
Michigan Rubber Products, Inc. in Cadillac, Michigan.
Services include compression/transfer molding, rubber and plastic injection molding, extrusion, and automated cutting & assembly. Products areas include air induction, NVH, static gaskets, tubing (air, water, and fuel), etc.
Minnesota Rubber and Plastics in Plymouth, Minnesota.
Specializes in rubber-to-metal, rubber-to-thermoplastic, rubber-to-teflon, and high performance elastomeric components in customized compounds. Products include o-rings, seals, etc.
MOCAP Custom Molding Group in Park Hills, Missouri.
A supplier of vinyl dip molded and rubber injection molded caps, plugs, grips and custom molded items for the automotive industry. Secondary operations include punching, slicing and printing. Other products include high temperature masking products such as tapes, discs and custom shapes produced from silicone, polyester and polyimide materials.
Moldtech, Inc. in Lancaster, New York.
A supplier of custom-molded rubber products such as gaskets, grommets, o-rings, connector seals, bellows, bushings, electronic seals, anti-vibration mounts, and metal-to-rubber bonded parts, etc.
ND Industries, Inc. in Clawson, Michigan.
A manufacturer of self-locking, self-sealing, adjustable fasteners, locking and sealing coatings for fasteners, seals and gaskets of PVC, crushable mastic and expandable rubber.
NN, Inc. in Johnson City, Tennessee.
A supplier of precision metal, plastic and rubber components to the automotive and other industries. Product capabilities include bearing components, hub assemblies, seals, shafts, housings, fuel injectors, brake parts, anti-vibration mounts, protective boots, etc.
Novagard Solutions, Inc. in Cleveland, Ohio.
A manufacturer of polyvinyl chloride foam (PVC) for use in gasketing and noise reduction as well as silicone adhesive and sealants, including single component, two component and UV cure materials for use in gasketing, coating, encapsulating and bonding plus silicone greases and compounds.
Nyloncraft, Inc. in Mishawaka, Indiana.
A provider of dual plastic automotive applications, interior/exterior functional parts, vacuum manifold assemblies, air-ride suspension components, metal to plastic conversions. Capabilities include SDRC - IDEAS, AutoCAD, Unigraphics, Moldflow, and FEA.
Orion Industries, Inc. in Ayer, Massachusetts.
Supplies gaskets and seals to the automotive industry. Products include silicone, cellular urethane, cross linked polyethylene, natural rubber, neoprene, blended neoprene, cork, cork/neoprene blend, and polyester foam gaskets and seals. Capabilites include fabrication of parts from open-cell sponge, closed-cell sponge and solid/dense materials. Processes include die-cutting, stamping, waterjet cutting, laser cutting, CNC plastic routing, and plastic forming.
Pacific Die Cut Industries in Hayward, California.
A supplier of die cut, extruded and laminated gaskets, seals, and other interior trim components.
Parker Seal Company in Lexington, Kentucky.
Produces rubber o-rings for automotive applications.
Plastomer Corporation in Livonia, Michigan.
A manufacturer of flexible polyurethane foams for automotive seating, headrest, gasket, seal and sound insulation applications. Also provides adhesive backed products made of foams, rubber, PET, EPDM, PVN, die cut, molded or cut to shape.
Precix, Inc. in New Bedford, Massachusetts.
A designer and manufacturer of elastomeric, o-rings and customer elastomer solutions for automotive, aerospace and chemical processing applications. Automotive sealing solution applications include quick-connects, standard connects, fuel injectors, fuel rails, fuel tanks, fuel pumps, rollover valves, fuel sensors, fuel level sensors, fuel pressure sensors, relief valves, fuel filters, wheel cylinders, master cylinders, ABS seals, recuperating seals, gas caps, oil pumps, oil pressure sensors, crankcase inlet seals, electrical wiring harnesses, HVAC systems, emission control systems, alternative fuel systems seals, and transmission/transfer cases.
PressCut Industries, Inc. in Carrollton, Texas.
A supplier of gaskets, EMI/RFI shielding, die cut parts and molded rubber components for applications such as brake valves, power steering, transmissions, air conditioners, and electronics, etc.
Profom Inc. in Laval, Québec.
A gasket fabricator specializing in roll goods and die-cut parts. Interior and exterior applications include anti-vibration, shock absorption, sealing and mounting products such as instrument panel gaskets, ventilation system gaskets, radiator anti-vibration gaskets, anti-corrosion gaskets, etc.
Rampf Group, Inc. in Wixom, Michigan.
A polyurethane material supplier for encapsulating and foam-in-place gasketing. A meter, mix and dispensing equipment manufacturer for dispensing polyurethane, silicone, epoxy, and adhesives. Provides work cells for robotic dispensing, part handling automation and material for foam-in-place gasketing and electronics potting applications. Also offers contract manufacturing for programs involving polyurethane dispensing.
R & J Manufacturing Company in Walled Lake, Michigan.
A supplier of custom seals for engine and transmission testing. Other products include electrical test harnesses used to connect engines and transmissions to electronic test equipment.
REHAU Incorporated in Novi, Michigan.
A manufacturer of polymer extrusion, injection molded thermoplastic automotive components including PVC tubing. Products include windshield & backlight moldings, pillar covers, cowl screens, bumpers, radiator grilles, windshield moldings, wheelhouse covers, stone protection covers, rocker panels, bumpers, and spare wheel covers.
Reiss Manufacturing, Inc. in Blackstone, Virginia.
Specializes in manufacturing parts and components out of silicone rubber, fluorosilicone, flurocarbon rubber, Viton, EPDM rubber and a variety of extruded engineered plastics and molded foams and high injection plastics. Ronsil rubber division offers formulating to specification or custom, mixing, extruding profiles, and tubing, molding by 4 different process, calendering continuous sheet in rolls for die cut gaskets, laminating, fabricating and die cutting. Facilities include an on-site laboratory to provide in-house testing. Provides in-house tool, die, and mold design and manufacturing. Services include prototyping assistance. Fabricating and assembly work offered.
Robin Industries, Inc. in Independence, Ohio.
A supplier of elastomeric components for automotive applications such as electrical wire harness assembly components, air intake seals and isolators, control cable components, electrical connector seals, driveline seals, NVH suspension bushings, torque tubes, etc.
Rogers Corporation in Rogers, Connecticut.
A specialty materials manufacturer. Products supplied to the automotive industry include silicone, polyurethane and polyolefin foams and electroluminesecent lamps and drivers. Applications include seals, gaskets, watershields and backlighting for dashboards and PRNDL's.
Rogers Corporation in Carol Stream, Illinois.
A supplier of cellular, solid and specialty silicone materials produced in roll-stock. Applications include gaskets, heat shields, fire stops, seals, cushions and insulation for automotive and other industrial applications.
Rubber Processing Management, L.L.C. in Centerville, Ohio.
Rubber processing consultation and sales of all elastomeric, plastic and metal products.
Saint-Gobain Corporation in Valley Forge, Pennsylvania.
Manufacturers of glass, abrasives, fiber glass reinforcements, coatings, compounds, bearings, and seals.
Saint-Gobain Performance Plastics Corporation in Wayne, New Jersey.
A supplier of advanced film products, bonding tapes, foam seals, foam tapes, bonding tapes, fluid handling hose and tube, machined and molded fluoropolymers, cable lining, foam gaskets, bearing and wear products, Norglide bearings, etc.
Schunk Graphite Technology, LLC in Menomonee Falls, Wisconsin.
A manufacturer of carbon brushes and brushcards, carbon contacts, fuel cell plates, complete sub-assemblies, sintered bearings/powder metal parts and various components/ sub-assemblies for the automotive industry. Additional applications include seal rings for automotive water pumps, vanes and rotors, high temperature piston rings, and dies for metal casting.
Sealeze in Richmond, Virginia.
A manufacturer of brush seals in straight strips, coils, cups, spirals and custom profiles to customer drawings. Brush filaments include nylon, polypropylene, polyester, stainless steel, brass, horsehair and tampico. Applications include wipers, feeder guides, spray/chip shields, lever seals, clean room seals, machine guards, air and light shields, dust collection and static dissipation. In-house design engineering, machining and fabrication.
SFC KOENIG LLC in North Haven, Connecticut.
A supplier of sealing plugs and flow control solutions. Automotive application areas include engine blocks, crank cases, valve covers, turbo as well as transmissions, steering, brakes, and other driveline systems.
SGL Carbon, LLC in St. Marys, Pennsylvania.
A manufacturer of graphite components for mechanical applications. Properties include the ability to run dry without lubrication, chemical and heat resistance, low thermal shock, low coefficient of thermal expansion. Parts are mass produced by injection molding or pressing to size. Typical parts include bearings, seals, pumps, and sliding elements.
Sherex Fastening Solutions, LLC in Tonawanda, New York.
Capabilities include the manufacture, design , distribution, & automation of blind rivet nuts, brass inserts, & specialty fasteners.
Sika Automotive in Madison Heights, Michigan.
A manufacturer of sealants and adhesives. Applications include acoustic, bonding, reinforcing and sealing from body in white through the paint shop and trim area. Offers full acoustic testing to optimize vehicle acoustic performance. Capabilities include material bench marketing, prototype development, product validation, performance optimization and analytical prediction.
SKF USA, Inc. in Elgin, Illinois.
Designs and manufactures dynamic shaft seals for engine, transmission, driveline and wheel-end systems; rack and pinion steering gear seals; power steering pump seals; MIP gasket modules for cover plates and pans; and gas spring seals as well as supplies valve stem seals, bonded piston seals and bearing seals.
SKF USA, Inc. in Kulpsville, Pennsylvania.
Manufactures ball bearings, bearing housings, seals, clutch assemblies, and molded rubber products.
Sorbothane, Inc. in Kent, Ohio.
A manufacturer and custom molder of proprietary urethane compounds including Sorbothane and SorboGel, which have favorable visco-elastic properties. Suitable for high-end shock isolation and vibration damping. Sorbothane is a cast material that is produced in a durometer range from 20 through 80 durometer (Shore 00 scale).
Sperry & Rice Manufacturing Company, LLC. in Brookville, Indiana.
A supplier of extruded rubber and plastic profiles, seals, tubing, gaskets, weather-stripping, trim, bumpers and hoses. Secondary operations include mandrel forming, vulcanizing endless and injection molded details.
SPIROL International Corporation in Danielson, Connecticut.
Design and manufacturing of engineered components used for joining and assembly such as coiled and slotted spring pins; straight, knurled, grooved, and headed solid pins; drive studs; tubular products including alignment dowels, spacers, and compression limiters; threaded inserts for plastics; machined nuts; shims, gaskets, and thin spacers; compression, piston, and cylinder liner rings; lock washers and thrust washers; and precision metal stampings. Designs and builds pin and insert installation equipment and systems, and parts feeding equipment.
Standard Rubber Products Company in Elk Grove Village, Illinois.
A supplier of custom die-cut, fabricated components and converted materials. Applications include cushioning gasketing and sealing, insulating, shielding, shock absorption, filtering, low-outgassing, lamination, automated assembly requirements, vibration control, and mounting, etc.
TechRim Standards, LLC in Auburn Hills, Michigan.
An international automotive component supplier. Manufacturing capabilities include production of door hinges, brackets, strikers, pin and receivers, fittings, investment and shell castings, magnesium and aluminum die castings, rubber hoses and other rubber molding products. High volume production and assembly.
Temel Gaskets USA in Atlanta, Georgia.
A supplier of gaskets.
tesa tape, Inc. in Charlotte, North Carolina.
A global manufacturer of pressure sensitive adhesive tapes. tesa provides professional solutions for permanent mounting, marking, securing and identification as well as black out design, permanent protection, hole covering, cable mounting, temporary protection, design painting, masking and wire harnessing.
Thermoseal Inc. in Sidney, Ohio.
Exclusive licensee for the Klinger Group of Companies in North America. Manufacturers KLINGER®sil compressed non-asbestos gasket materials and Sealex®PTFE flange sealant. Other products include flexible graphite material, Milam laminated mica sheet, KLINGER®top-chem top 4 'no-creep' PTFE sheets, and Thermoseal® soft-chem® expanded PTFE sheets.
Trelleborg Sealing Solutions Canada, Inc. in Etobicoke, Ontario.
Specializes in the manufacturing of heat cured silicone rubber products to form molded extruded gaskets and seals designed to withstand high temperature exposure. Materials used include silicone, fluorosilicone, HNBR, NBR, EPDM, etc. Processes include extrusion, compression molding, injection molding, wasteless molding and flashless molding. Products areas include vapor management, emission control, power transmission gaskets and manifold systems.
Trelleborg Sealing Solutions Great Lakes in Fort Wayne, Indiana.
A supplier of polymer sealing product solutions for the automotive and other industries. Applications include air induction systems, climate control, emissions control systems, engine cooling, fuel storage and delivery systems, and ride control.
TRISEAL Corporation in Hebron, Illinois.
A supplier of heavy duty wheel end components including wheel seals, hub caps, gaskets, pinion seals, etc.
Trostel, Ltd. in Lake Geneva, Wisconsin.
A custom designer and manufacturer of precision molded rubber seals and assemblies. Products include shaft seals, face seals, pressure seals, integral seal assemblies, etc.
Unique Fabricating, Inc. in Auburn Hills, Michigan.
Services include design, assembly, and manufacturing services for non-metallic fabrication. Automotive applications include buzz, squeak & rattle; bolster cloth and carpet; console bin mats; cupholders inserts; glove box liners; bumper pads; cowl seals and screens; air management seals and baffles; paint masking for exterior trim; wheal housing barriers; fender stuffers; HVAC seals; under dash noise control products; mirror gaskets, gas tank pads; A, B, C pillar insulation, tail lamp gaskets, and headliner components.
United Gasket Corporation in Cicero, Illinois.
A supplier of die cut gaskets.
Warren Industries, Ltd. in Concord, Ontario.
Provides stamping and other services such as milling, lathing, welding, and assembling, etc. Other capabilities include metal forgings, oil gaskets and bonded piston components.
WIKA Instrument, LP in Lawrenceville, Georgia.
A supplier of pressure and temperature instruments as well as diaphragm seals.
Wolverine Advanced Materials, LLC in Dearborn, Michigan.
A supplier of vibration damping and sealing products for the automotive and other industries. Automotive applications include oil pans, timing front covers, case to case transmission separator plates, baffles/cam covers, closure panels and latches as well as structural brackets.
Young Technology, Inc. in Addison, Illinois.
A designer, manufacturer and importer of automotive and motor industry components including leather wrapped components, shifter system components, oil seals, bearing components, motor laminations, molded rubber, molded plastic components, forged and formed steel components.