Fuel Systems Tanks (42)
Suppliers of vehicle fuel system tanks including parts, components and assemblies.
ABC Group, Inc. in Toronto, Ontario.
Provides a complete line of thermoplastic systems and components for air induction systems, fluid management systems, fuel systems, exterior and interior systems, including instrument panels and spoilers for the global automotive industry. Processes include blow molding, injection molding, thermoforming, powder slush molding, flexible foaming systems, sheet extrusion, interior/exterior painting, metal stampings and material compounding.
ABC Group Sales and Marketing in Southfield, Michigan.
A supplier of automotive products. Applications include interior (instrument panels, seating systems, interior trim, and HVAC); exterior (bumper systems, spoilers, running boards, and trim); under-hood (flexible products, air induction, and fluid management), and fuel systems.
AGS Automotive Systems in Cambridge, Ontario.
Products include brackets, fuel tank straps, floor pans, engine support assemblies, bumper assemblies, impact beams, and pick-up box sub-assemblies.
Alfmeier Friedrich & Rath, LLC in Greenville, South Carolina.
Designs and manufactures fuel modules including the flange, pump housing, level sensors, and venting valves, etc.
Arlen Tool Company, Ltd. in Windsor, Ontario.
Automotive products include A, B, & C pillar garnish trim; carpet retainers; consoles; glove boxes; instrument panel components; door handle bezels; step pads; roof rails; splash/stone shields; valances; license plate brackets; wheel liners; headlamp bezels; grilles, side body trim molding; mud flaps; rocker panels; air dams; hood screens; gas tanks (multi layer blow molds), etc.
Arvin Sango, Inc. in Madison, Indiana.
A supplier of exhaust systems and other components. Products include mufflers and general exhaust parts and components as well as door impact beams, C-class stampings, upper fuel tanks, lower fuel tanks, and instrument panel reinforcements.
Dexter Stamping Company, LLC in Jackson, Michigan.
A provider of metal stamped and extruded components.
Eaton Corporation in Cleveland, Ohio.
Expertise in component integration platforms for engine air management systems, powertrain and specialty controls. Produces mono- and multi-cylinder heads in aluminum or cast iron, diesel and gasoline fuel filters, oil filters, fuel vapor valves, and common rail diesel pressure/flow regulators, valvetrain products, superchargers, cylinder heads, locking and limited slip differentials, sensors, actuators, transmission control modules, mirror glass actuators, suspension controls, tire valves, decorative body moldings and fluid connectors including hoses, hose assemblies, fittings and adapters.
FICOSA North America Corporation in Madison Heights, Michigan.
A provider of automotive systems and components such as rear-view systems (interiors and external), gear shift systems (automatic and manual), parking control systems (hand brake manual or electrical), command and control cables, systems for seats and doors, pedals, windscreen and headlamp washer systems, air tubes, tanks for water and liquid brakes, sun visors, steering column & starter locks as well as closing and locking systems.
Fleetwood Metal Industries in Oldcastle, Ontario.
Services include metal stampings, Mig welded assemblies, spot welded assemblies, fuel tank protectors and door intrusion stampings. Product areas include underbody (skid plates, fuel tank shields, fuel tank straps); powertrain (engine brackets, heat shields); and body (steering hanger beams, structural members, roof supports, door reinforcements, hinge assemblies, mounting brackets).
Fluid Routing Solutions,Inc. in Lexington, Tennessee.
A supplier of complete fuel handling systems and individual components such as tubes, hoses, tanks, couplings, fuel fillers, and other assemblies, fittings, valves, canisters, filters and quick connectors.
Fluid Routing Solutions, Inc. in Southfield, Michigan.
A manufacturer of fuel systems and components, fuel filter assemblies, canisters, fuel lines, vapor recovery systems, and high tech plastic systems.
Fuel Total Systems Kentucky Corporation in Lebanon, Kentucky.
A manufacturer of automotive plastic fuel tank systems and related components such as fuel filler pipes.
GVS Filter Technology, Inc. in Indianapolis, Indiana.
Manufactures filters and components using any thermoplastic material via injection molding. Products include filters and components for ABS systems, low and high pressure gasoline injection systems, high pressure common rail diesel, and fuel tanks as well as ventilation membranes for mechatronics applications, sensors and CPUs.
HERO Logistics, LLP in San Antonio, Texas.
An on-site logistics supplier for Toyota Motor Manufacturing Texas (TMMTX). Handles fuel tanks.
IER Fujikura, Inc. in Macedonia, Ohio.
A manufacturer of high precision, custom molded elastomer seals using over 20 different base polymers with in-house formulation and mixing capabilities. Specialties include fluorinated elastomers. Capabilities include engineering support. Automotive applications include elastomer seals and parts for fuel systems emission controls, air management systems, brake systems, safety devices, electrical connectors, climate control, etc. (ORVR seals, EGR diaphragms, rollover valves, pump cups, air bags seals, air valves, thermostat components, needles, canister purge solenoids, etc.).
IMPCO Technologies, Inc. in Santa Ana, California.
A supplier of gaseous fuel management and storage systems and components that allow internal combustion engines and other propulsion systems to operate on alternative fuels such as natural gas, propane, ethanol, methanol and hydrogen used in fuel cells.
Inergy Automotive Systems (USA), LLC in New Boston, Michigan.
Produces plastic fuel tanks.
Inergy Automotive Systems (USA), LLC in Troy, Michigan.
A supplier of automotive fuel systems and air induction systems. Products include fuel tanks, fuel-filler necks and caps, on-board refueling vapor recovery (ORVR) systems, fuel pumps, vapor canisters, on-board diagnostic sensors, fuel-level sensors, fuel lines, wiring harnesses, and roll-over valves, etc.
Kautex Corporation in Windsor, Ontario.
Produces plastic fuel tanks and fuel supply systems. Other products include blow molded functional components for engine compartment, interior and trunk applications such as washer and headlamp cleaning systems, cooling water pumps, air ducting, door trays, glove compartment lids, rear seats, etc.
Kautex of Georgia, Inc. in Lavonia, Georgia.
Manufactures plastic fuel tank systems and filling tubes.
Kautex Textron in Troy, Michigan.
A supplier of instrument panels, door panels, armrests, airbag doors, center consoles, headliners, exterior trim, lighting, iron castings, camshafts, fuel tank systems, fuel filter assemblies, windshield and headlamp washing systems, seating comfort systems, machine tools, components and assembly systems for the automotive market.
Magna International, Inc. in Aurora, Ontario.
A supplier of automotive systems, assemblies, modules and components. Capabilities include the design, engineering, testing and manufacture of automotive interior systems; seating systems; closure systems; body and chassis systems; vision systems; electronic systems; hybrid & electric vehicles/systems; exterior systems; powertrain systems; roof systems; as well as complete vehicle engineering and assembly.
Matsu Barrie Manufacturing, Inc. in Barrie, Ontario.
Produces engine components, gas tanks, exterior sun roof parts and structural body components.
Midwest Acoust-A-Fiber, Inc. in Delaware, Ohio.
Manufactures thermal acoustical engineering products for high temperature insulation and noise suppression. Products include fiberglass, eglass, basalt, diabase, ceramic, vermiculite, and wood mat. Automotive applications include internal combustion engine components, catalytic converters, crossover pipes, insulation, fuel tanks, mufflers, exhaust manifolds, turbo chargers, firewalls, hood liners, heat shields, etc.
Norma Group America in Auburn Hills, Michigan.
A supplier of worm-drive clamps. Applications include air induction, fuel, HVAC, exhaust systems brackets, etc.
Plastic Omnium Auto Exterior, LLC in Norcross, Georgia.
A manufacturer of bumper body panels, body modules and fuel systems.
Plastic Omnium Auto Exterior, LLC in Troy, Michigan.
A supplier of fascias, front-end modules, rear-end modules, fenders, body panels, fuel tanks and bumper fascias.
Plastikon Industries, Inc. in Hayward, California.
Products include exterior louvers, paneling and railings, bumper supports, fenders, mud guards, door locking systems; interior molded systems such as instrument panels, consoles, garnish pillars, entertainment/audio/video system components, braking, seating and storage components, etc.; interior wrapping for console lids, shifter knobs and steering wheels; interior trim for seating door panel inserts, gear shift and parking boots,etc.; under the hood applications such as fan shroud and cooling systems, resonators, fuel tank systems and electrical covers, etc.; and decorative applications such as nameplates, interior/exterior trim, bezles, knobs, etc.
RPK Mexico S.A. de C.V. in Celaya, Guanajuato.
A manufacturer of springs, wire forms and copper coils for the automotive industry.
Spectra Premium Industries, Inc. in Boucherville, Québec.
Designs and manufactures fuel systems, oil pans and components for the automotive and indsutrial markets as well as tooling. Automotive original equipment products include high-pressure die cast magnesium alloy parts and steel fuel tanks.
Stant USA Corporation in Connersville, Indiana.
An integrated manufacturer of engineered vapor and fluid control components. Applications include fuel systems (including fuel caps, fuel vapor control valves, and evaporative canisters) and cooling systems (including thermostats, thermostat housing subassemblies and radiator caps).
Takumi Stamping Texas, Inc. in San Antonio, Texas.
A producer of small metal stamped automotive parts such as brackets, gas tank doors, etc.
TI Automotive, Ltd. in Ossian, Indiana.
Produces diesel, gasoline and flex-fuel fuel tanks.
TI Automotive, Ltd. in Auburn Hills, Michigan.
A manufacturer of fluid storage, carrying, and delivery systems, vapor management systems and hydro-formed components. Products include gasoline direct-injection and diesel fuel lines and rails as well as fluid carrying lines for turbocharger coolant systems.