Fuel Pumps (43)
Suppliers of vehicle fuel system pumps and related components.
A. Berger, Inc. in Spartanburg, South Carolina.
A supplier of turned-parts, milled-parts, ball screw drives, motor spindles and assemblies. Automotive product areas include fuel injection components, diesel pump components, injector parts, fuel pumps, hydraulic systems, chassis components, turbocharger components, exhaust gas recirculation components, camshafts, master brake cyclinders, etc.
Advanced Forming Technology USA in Longmont, Colorado.
Services include metal injection molding combining powder metallurgy and plastic injection, thixoforming, and metal matrix composites.
Airtex Products, LP in Fairfield, Illinois.
A supplier of mechanical and electric fuel pumps including in-tank hangers, senders and modules as well as mechanical and electric water pumps, fan clutches, and water outlets.
Alfmeier Friedrich & Rath, LLC in Greenville, South Carolina.
Designs and manufactures fuel modules including the flange, pump housing, level sensors, and venting valves, etc.
Amtec Precision Products, Inc. in Elgin, Illinois.
Services include precision machining, injection molded plastics, product assembly and tool systems. Application areas include powertrain, fuel, ride control, brake, air conditioning and hydraulic valves/pumps.
Anderson-Cook, Inc. in Chesterfield, Michigan.
Specializes in components and sub-assemblies for automotive power seat mechanisms, seat recliners, memory-tilt steering, pedal positioners as well as fuel and oil pump gears and input and output shafts. Products include spur and helical hobbed gears, spur and helical shaper cut gears, acme nuts, lead screws, worms and threaded parts as well as finished pre-assembled components.
Associated Fuel Pump Systems Corporation in Anderson, South Carolina.
A manufacturer of automotive fuel pumps, fuel pump modules and fuel pump brackets. Products include armatures, covers and impellers.
BorgWarner Automotive, Inc. in Auburn Hills, Michigan.
A manufacturer of parts and components for engines, transmissions and four-wheel drive systems. Products include engineered components and systems for automatic transmissions; emissions and thermal management products and systems; turbochargers; four-wheel and all-wheel drive torque management systems; as well as chain and chain systems for engines, transmissions and four-wheel drive systems.
Camcraft, Inc. in Hanover Park, Illinois.
A hydraulics and flow component specialist. Product areas include engineered components and assemblies in the areas of fuel systems (injector, pump or rail components); control valves (variable valve timing, cam-phasing, cylinder deactivation, stability control systems, variable displacement compressors and transmissions), and emerging technologies (occupant sensors, variable compression ration (VCR), camless engines).
Ceradyne, Inc. in Costa Mesa, California.
A supplier of advanced technical silicon nitride ceramics. Applications include cam rollers, diesel fuel pump rollers, valve lifters & tapets, and valves.
Chemprene, Inc. in Beacon, New York.
A supplier of lightweight conveyor belting, precision coated fabrics and molded diaphragm products.
Eaton Fluid Power in Eden Prairie, Minnesota.
A manufacturer of fluid power systems; electrical power quality, distribution and control; automotive engine air management and fuel economy; and intelligent truck systems for fuel economy and safety.
Engineered Sintered Components Company in Troutman, North Carolina.
A manufacturer of powder metal structural components including variable valve timing components such as valve seat inserts, valve guides, valve plates; valve train components; oil pump gerotor gears; clutch hubs, sprockets and sprocket chains; power steering parts; and ABS sensor rings for anti-lock braking systems.
Fluid Routing Solutions,Inc. in Lexington, Tennessee.
A supplier of complete fuel handling systems and individual components such as tubes, hoses, tanks, couplings, fuel fillers, and other assemblies, fittings, valves, canisters, filters and quick connectors.
Fluid Routing Solutions, Inc. in Southfield, Michigan.
A manufacturer of fuel systems and components, fuel filter assemblies, canisters, fuel lines, vapor recovery systems, and high tech plastic systems.
Gardner Denver Thomas, Inc. in Sheboygan, Wisconsin.
A supplier of custom pump and compressor solutions. Automotive applications include air seats, air horns, air doors, load leveling and automatic tire inflation.
Gibbs Die Casting Corporation in Henderson, Kentucky.
A global supplier of aluminum and magnesium die-castings for A/C compressors, fan drives, steering wheel armatures, engines, transmissions, and suspension applications. Services include machining, assembly and testing.
GITS Manufacturing Company in Creston, Iowa.
A supplier of oil hole covers, oil cups, brush oilers, tubing clips, shift seals, and drum & tank gauges.
Hitachi Automotive Systems Americas, Inc. in Farmington Hills, Michigan.
Manufactures automotive electronics and electrical parts and systems including airflow sensors, throttle bodies, engine and transmission control modules, alternators, distributors, ignition coils, idle speed control valves, electronic throttle controls and transfer case control modules.
Hitchiner Manufacturing Company, Inc. in Milford, New Hampshire.
A supplier of complete-to-print ferrous automotive investment castings, specializing in high volume powertrain, fuel and exhaust applications.
HN Precision in Lake Bluff, Illinois.
Specializes in precision CNC machining of complex and semi-complex castings and components utilizing non-ferrous castings and components. Components include transfer cases, retainers, 2x4 and 4x4 manual transmission housings, suspension components, engine mounts, wheel hubs, diesel engine pumps, mass transit brake housings, manifolds and lower manifolds, oil pump assemblies, throttle bodies, compressors, cylinder heads, fuel pumps and fuel injection assemblies, optical bases, and axles.
Holley Performance Products, Inc. in Bowling Green, Kentucky.
Products include carburetors, fuel pumps, pressure regulators, fuel injection components, intake manifolds, and cylinder heads, etc.
IER Fujikura, Inc. in Macedonia, Ohio.
A manufacturer of high precision, custom molded elastomer seals using over 20 different base polymers with in-house formulation and mixing capabilities. Specialties include fluorinated elastomers. Capabilities include engineering support. Automotive applications include elastomer seals and parts for fuel systems emission controls, air management systems, brake systems, safety devices, electrical connectors, climate control, etc. (ORVR seals, EGR diaphragms, rollover valves, pump cups, air bags seals, air valves, thermostat components, needles, canister purge solenoids, etc.).
Inergy Automotive Systems (USA), LLC in Troy, Michigan.
A supplier of automotive fuel systems and air induction systems. Products include fuel tanks, fuel-filler necks and caps, on-board refueling vapor recovery (ORVR) systems, fuel pumps, vapor canisters, on-board diagnostic sensors, fuel-level sensors, fuel lines, wiring harnesses, and roll-over valves, etc.
Johnson Electric, Inc. in Plymouth, Michigan.
Activities include virtual design, prototyping, building sequence and validation testing. Products include body instrumentation (door lock acutator motors, power mirrors, headlamp adjusters, climate controls, washer pumps etc.); powertrain management (small motors & armatures for fuel pumps, engine management, air pumps etc.); chassis braking (motors used in wipers, 4WD transfer cases, ABS, electric steering, etc.); body climate (seat adjuster motors, climate control actuators, window lift geared motors ); powertrain cooling (cooling fan modules, blower motors); actuator systems (HVAC actuators, head rests); solenoids/switchs/subsystems (shift lock solenoids, key interlock solenoids, active engine mounts).
Kyosan DENSO Manufacturing Kentucky, LLC in Mt. Sterling, Kentucky.
A manufacturer of fuel pump modules, suction filters, pressure regulators, onboard refuel vapor recovery valves.
LMC Industries, Inc. in Arnold, Missouri.
A supplier of metal-stamping, plastic injection/insert molded automotive parts, and tool and die services. Capabilities also include chemical passivating, assemblies, welding, screw machines and general machine work as well as part decoration (hot stamping, decal transfers), sonic welding assembly and specialty packaging, etc.
Madison-Kipp Corporation in Madison, Wisconsin.
A supplier of aluminum engineered machined parts and subassemblies (high pressure, squeeze, ductile, semi-solid), complex machining and assembly services.
Melling Tool Company in Jackson, Michigan.
Products include oil pumps, clutch water pumps, polymyer oil pumps, fuel lift pumps, power steering pumps, fabricated tubes, wire mesh filters and welded & brazed assemblies, cold start valves, temperature control valves, aluminum castings, cylinder sleeves, oil filter adapters, oil pump drive shafts, etc.
Mikuni American Corporation in Northridge, California.
A supplier of position sensors, carburetors, throttle bodies, fuel pumps, vacuum pumps, accelerator pedal modules, fuel injection systems, heaters, exhaust valves, oil pumps, coolant control valves, water pumps, secondary air valves, metering oil pumps, and hydrogen sensors, etc.
Norma Group America in Auburn Hills, Michigan.
A supplier of worm-drive clamps. Applications include air induction, fuel, HVAC, exhaust systems brackets, etc.
Peterson Spring Corporation in Southfield, Michigan.
A supplier of automotive springs including engine valve springs, rings, multiform clips, wire forms, hose clamps, stampings and patented/special components.
Pierburg, Inc. in Fountain Inn, South Carolina.
Products include engine components related to emission control, exhaust gas recirculation systems, air supply, electronic throttle control systems, throttle valves, solenoid valves, divert-air valves as well as drive modules. Pierburg Pump products include oil pumps, vacuum pumps, water circulation pumps, and coolant pumps.
PMC SMART Solutions, LLC in Cincinnati, Ohio.
A plastic injection molder. Supplies integrated plastic components and assemblies to the automotive and other industries. Specializes in under-hood components for engine management systems. Expertise in plastic processing of thermoplastic insert, hot-oil, thermoset, compression and transfer molding plastic materials including glass-filled nylons, PPS, Acetal/POM, PPA/Amodel, PET, PBT, ABS, etc. Capabilities include product design, prototyping, tooling and high-volume production.
Robert Bosch, LLC in Broadview, Illinois.
A manufacturer of anti-lock braking systems and other brake components such as calipers, discs, drums, hydraulics, roters. Other products include fuel injection components, emission control components, starters & alternators, airbag triggers, diodes, sensors, etc.
Robert Bosch, LLC in Farmington Hills, Michigan.
Parts/components supplied include gasoline systems (engine management, modules and engine components, fuel injectors, sensors, ignitions, electronic throttle control, integrated air/fuel modules); diesel systems (electronic diesel control, air management, fuel injection management, exhaust gas management); chassis (antilock braking, traction control, electronic stability programs, brake assistance, sensors, hydraulic braking and components such as brake boosters & master cylinders, disc brakes, drum brakes, wheel modules); energy & body (alternators/starters, airflow systems, software and electronics, engine thermal management components, climate-control components, seating comfort, mechatronics for side doors & roofs, windshield and rear-window cleaning); car multimedia (indication & display instruments, car radios, cockpit electronics, HMI, navigation & driver info); electronics (electronic control units, electronic occupant-protection, driver-assistance, semiconductors, sensors, relays).
Robert Bosch, LLC in Charleston, South Carolina.
Designs and produces automotive components and systems for vehicle and powertrain manufacturers. Products include gasoline & diesel injection and anti-lock braking systems.
RPK Mexico S.A. de C.V. in Celaya, Guanajuato.
A manufacturer of springs, wire forms and copper coils for the automotive industry.
Sanko Gosei Technologies USA, Inc. in Fort Wayne, Indiana.
Precision injection moulding of automotive components. Products include fender liners, mud guards, engine splash shields, baffles, underbody shielding, insulator panels, and various chassis and body components.
Sherex Fastening Solutions, LLC in Tonawanda, New York.
Capabilities include the manufacture, design , distribution, & automation of blind rivet nuts, brass inserts, & specialty fasteners.
Stanadyne Corporation in Windsor, Connecticut.
A manufacturer of diesel fuel injection systems, diesel fuel filter and water separators, diesel fuel additives, and engine valvetrain components. Application areas include fuel systems (contact fuel systems, DE pumps, diesel common rail, DS pumps, fuel injectors, gasoline direct injection, integrated fuel systems, mechanical pumps, unit (PF) pumps); filtration systems (contact filtration systems, fuel manager); precision manufacturing; diesel fuel additives (contact, gasoline engine injector cleaners and conditioners, lubricity formulas, performance formulas, winter formulas), etc.
TI Automotive, Ltd. in Auburn Hills, Michigan.
A manufacturer of fluid storage, carrying, and delivery systems, vapor management systems and hydro-formed components. Products include gasoline direct-injection and diesel fuel lines and rails as well as fluid carrying lines for turbocharger coolant systems.
Trelleborg Automotive Americas in South Haven, Michigan.
A provider of vehicle anti-vibration and acoustic management services. Products include systems for engine mounting, suspension, exhaust, fluid circulation, impact protection, brake shims and flexible boots.