Fuel System Hoses/Lines (66)
Suppliers of vehicle fuel system hoses and lines, etc.
Avon Automotive in Cadillac, Michigan.
A supplier of low-pressure hoses for air-induction, fuel and coolant systems.
Chemprene, Inc. in Beacon, New York.
A supplier of lightweight conveyor belting, precision coated fabrics and molded diaphragm products.
ContiTech North America, Inc. in Montvale, New Jersey.
A supplier of air spring systems, elastomer coatings, fuel hoses, hoses and hose assemblies for heating/cooling systems, belt drive systems and vibration control products.
Cooper-Standard Automotive, Inc. in Mt. Sterling, Kentucky.
Supplies molded and extruded rubber products, reinforced rubber hoses and automotive parts for use in fuel delivery systems. Products include body sealing (auxiliary, belt line, door, glass runs, hood, lid roofs, etc.); fluid handling (geating & cooling, fuel & brake, emissions. HVH, etc.); control (body cushions, engine nounts, transmission mounts, torque struts, hydromounts/gydrobushings, active noise & vibration controls, etc.).
Cooper-Standard Automotive, Inc. in Novi, Michigan.
A global manufacturer of sealing system products, fluid system products, and noise, vibration, and harshness control products, and other related products.
Cooper-Standard Automotive, Inc. in Oscoda, Michigan.
Products include tube and hose assemblies for fuel and brake applications (single lines and bundles).
Cooper-Standard Automotive, Inc. in New Lexington, Ohio.
Products include tube and hose assemblies for fuel and brake applications (single lines and bundles). Services include tube milling of single and double wall and stainless steel material. Capabilities include Galfan and Nyclad coating.
Curtis-Maruyasu America, Inc. in Lebanon, Kentucky.
A supplier of fabricated steel tubing. Products include tubing for fuel, brake and clutch, torque tubes, oil cooler tubes, EGR pipes, gauge guides, water-bypass tubes, power steering tubes, etc. manufactured from low carbon, aluminum, stainless steel and multi-layer nylon tubing.
Dana Holding Corporation in Lisle, Illinois.
Sealing systems utilizing engineered gaskets, heat shields, valve stem seals, and other sealing components. Design, analysis, and manufacture of products from various materials, featuring multi-layer steel gaskets. Dyno testing, FEA, and compatible CAD software.
Dana Holding Corporation in Maumee, Ohio.
A supplier of axles; driveshafts; vehicle architecture; chassis, steering, and suspension products; sealing, thermal management, fluid transfer, and engine power products; systems assembly, management, and integration services; and related service parts.
Dana Sealing Products Group in Paris, Tennessee.
Develops composite bipolar plates for fuel cell applications. Capabilities include incorporation of polymer seals with the construction of bipolar plates.
DTR Industries, Inc. in Bluffton, Ohio.
Products include anti-vibration components, engine mounts, strut mounts, torque rods, dynamic dampers, muffler hangars, and hose (rubber, PVC, fuel, straight, curved, ATF oil, filler neck).
DTR Tennessee, Inc. in Midway, Tennessee.
Products include anti-vibration components, engine mounts, strut mounts, torque rods, dynamic dampers, muffler hangers, and hose (rubber, PVC, fuel, straight, curved, ATF oil, filler neck).
DURA Automotive Systems, LLC in Auburn Hills, Michigan.
A designer and manufacturer of driver control systems and a supplier of door modules, glass systems, seat mechanisms and structures, and engineered assemblies. Products include door modules, parking brake systems, automotive cables, transmission shifter systems, encapsulated and sliding windows, encapsulated glass systems, power and manual window regulators, hinges, latches, seat mechanisms and structures, engine control products, underbody tire carriers, jacks, brake, clutch and accelerator pedals, adjustable pedal systems, and other mechanical assemblies.
FlexFab, LLC in Hasting, Michigan.
An elastomeric engineering company that manufactures flexible components by compounding, calendering, extruding, molding, and bonding silicone rubber, organic rubber, and reinforcing materials. Products include hose, tubing, ducting, and custom designs.
Fluid Routing Solutions,Inc. in Lexington, Tennessee.
A supplier of complete fuel handling systems and individual components such as tubes, hoses, tanks, couplings, fuel fillers, and other assemblies, fittings, valves, canisters, filters and quick connectors.
Fluid Routing Solutions, Inc. in Big Rapids, Michigan.
A supplier of fuel systems components.
Fluid Routing Solutions, Inc. in Southfield, Michigan.
A manufacturer of fuel systems and components, fuel filter assemblies, canisters, fuel lines, vapor recovery systems, and high tech plastic systems.
Freudenberg-NOK General Partnership in Plymouth, Michigan.
Powertrain products including engine and transmission sealing products, air/fuel delivery modules, noise, vibration and harshness (NVH) modules. Chassis products including NVH modules, suspension components, bushings and mounts, axle and bearing seals, rubber, plastic and PTFE components for steering, brake, electrical and fuel packages.
Fuel Total Systems Kentucky Corporation in Lebanon, Kentucky.
A manufacturer of automotive plastic fuel tank systems and related components such as fuel filler pipes.
General Motors Components Holdings, LLC in Rochester, New York.
Produces fuel modules, fuel rails, EGR valves, lifter oil manifold assemblies, evaporative canisters and fuel injectors.
Hanil USA, LLC in Tallassee, Alabama.
Products include plastic and steel brake, fuel and power steering tube components.
HBD/ThermoidŽ, Inc. in Bellefontaine, Ohio.
A manufacturer of rubber v-belts, conveyor belting, brake hoses/tubing, fuel system hoses/lines, heater hoses, and rubber rolls.
HenkelOrbseal LLC in Richmond, Missouri.
Automotive sealants, adhesives and surface treatments.
Holley Performance Products, Inc. in Bowling Green, Kentucky.
Products include carburetors, fuel pumps, pressure regulators, fuel injection components, intake manifolds, and cylinder heads, etc.
Indiana Marujun, LLC in Winchester, Indiana.
Products include steering hanger beams, hand brakes, fuel lids, fuel filler pipes, hood hinges, hood locks, as well as miscellaneous body parts. Site activities include stamping, welding, painting and assembly.
Inergy Automotive Systems (USA), LLC in Troy, Michigan.
A supplier of automotive fuel systems and air induction systems. Products include fuel tanks, fuel-filler necks and caps, on-board refueling vapor recovery (ORVR) systems, fuel pumps, vapor canisters, on-board diagnostic sensors, fuel-level sensors, fuel lines, wiring harnesses, and roll-over valves, etc.
Kautex of Georgia, Inc. in Lavonia, Georgia.
Manufactures plastic fuel tank systems and filling tubes.
Keihin North America, Inc. in Anderson, Indiana.
A supplier of engine management and climate control systems. Products include engine devicess (intake manifolds, throttle body controls, active control mount solenoids, spool valves, fuel pipe assemblies); electronic controls (FI-ECUs, active control mount ECUs); transmission controls (solenoid valves, automatic transmission linear solenoid valves); climate controls (HVAC units, condensers, ambient sensors), etc.
Kokoku Rubber, Inc. in Schaumberg, Illinois.
A manufacturer of rubber parts and components. Automotive applications include diaphragms for carburetors, brakes and EGRs; valves for fuel control and exhaust gas control; fuel tubes, vacuum hoses, air suction tubes; carburetor floats; oil filter gaskets, cylinder head covers; piston boots, piston seals, rubber bushings for brakes; weather-stripping, trunk lid seals; mandrel-formed hoses; gas tank seals, fuel pump covers, etc.
Kongsberg Automotive, Inc. in Novi, Michigan.
A global supplier of seating comfort, automotive gear shift and heavy truck components. Products include seat comfort systems such as head restraints, arm rests, seat heat, vent, and lumbar supports; clutch actuation systems; cable actuation systems; gear shifters; transmission control systems; stabilizing rods, couplings; electronic engine controls; specialty hoses; tubes and fittings, etc.
Kyosan DENSO Manufacturing Kentucky, LLC in Mt. Sterling, Kentucky.
A manufacturer of fuel pump modules, suction filters, pressure regulators, onboard refuel vapor recovery valves.
Parker Hannifin Corporation in Cleveland, Ohio.
A manufacturer of pneumatic, fluid connector, hydraulic, filtration and seal technology products.
Performance Assembly Solutions in Livonia, Michigan.
An assembly supplier of niche and specialty powertrain modules for the transportation industry. Products include crate engines, OEM engine assemblies, fuel delivery systems, cylinder head assemblies, integrated air fuel modules, suspension systems and engine accessory drives.
PMC SMART Solutions, LLC in Cincinnati, Ohio.
A plastic injection molder. Supplies integrated plastic components and assemblies to the automotive and other industries. Specializes in under-hood components for engine management systems. Expertise in plastic processing of thermoplastic insert, hot-oil, thermoset, compression and transfer molding plastic materials including glass-filled nylons, PPS, Acetal/POM, PPA/Amodel, PET, PBT, ABS, etc. Capabilities include product design, prototyping, tooling and high-volume production.
RPK Mexico S.A. de C.V. in Celaya, Guanajuato.
A manufacturer of springs, wire forms and copper coils for the automotive industry.
Sanoh America, Inc. in Scottsboro, Arizona.
A supplier of fluid handling systems such as brake and fuel lines.
Sanoh America, Inc. in Findlay, Ohio.
A supplier of fluid handling systems such as brake and fuel lines, etc. Products include corrosion resistant tubing, tubular brazed assemblies, plastic tubing assemblies and stainless steel tubing assemblies.
Sanoh America, Inc. in Mt. Vernon, Ohio.
Products include brake tubes, fuel tubes and other tubular parts.
Sanoh Canada, Ltd. in Orangeville, Ontario.
A supplier of automotive tubular products including brake tubes, fuel tubes, etc..
Sapa Precision Tubing Rockledge in Rockledge, Florida.
Supplies extruded aluminum shapes, tubing, and drawn tubing for automotive and other applications. Products include Macro MPE tube for use in oil coolers and charge air coolers, Micro MPE tube for use in radiators, condensers and charge air coolers and drawn tubing for liquid line applications.
Stant USA Corporation in Romeoville, Illinois.
Stant USA Corporation in Connersville, Indiana.
An integrated manufacturer of engineered vapor and fluid control components. Applications include fuel systems (including fuel caps, fuel vapor control valves, and evaporative canisters) and cooling systems (including thermostats, thermostat housing subassemblies and radiator caps).
Stant USA Corporation in Rochester Hills, Michigan.
Site activities include sales and technical services. Facilities include a laboratory and testing equipment supporting fuel vapor and thermal management systems.
TechRim Standards, LLC in Auburn Hills, Michigan.
An international automotive component supplier. Manufacturing capabilities include production of door hinges, brackets, strikers, pin and receivers, fittings, investment and shell castings, magnesium and aluminum die castings, rubber hoses and other rubber molding products. High volume production and assembly.
The Goodyear Tire & Rubber Company in Akron, Ohio.
Specializes in tires, hoses, belts, interior trim, air springs, and molded rubber products.
TI Automotive Canada, Inc. in Bramalea, Ontario.
A supplier of fuel systems and fluid carrying systems including brake, fuel and HVAC applications.
TI Automotive, Ltd. in Ashley, Indiana.
A supplier of brake and fuel fluid carrying systems.
TI Automotive, Ltd. in Ligonier, Indiana.
A supplier of automotive fuel system and engine components such as fuel rails, power steering reservoirs, oil tubes, oil separators, water pipes, EGR tubes, cam lock rings, and flange & tube assemblies. Production capabilities include stamping, brazing, welding, fabrication, precision assembly, and leak detection.
TI Automotive, Ltd. in Auburn Hills, Michigan.
A manufacturer of fluid storage, carrying, and delivery systems, vapor management systems and hydro-formed components. Products include gasoline direct-injection and diesel fuel lines and rails as well as fluid carrying lines for turbocharger coolant systems.
TI Automotive, Ltd. in Caro, Michigan.
A fuel systems supplier.
TI Automotive, Ltd. in New Haven, Michigan.
Brake & fuel fluid carrying systems.
TI Automotive, Ltd. in McAllen, Texas.
Supplies fluid carrying systems. Site operations include warehousing.
Toyoda Gosei North America Corporation in Troy, Michigan.
A manufacturer of interior and exterior products, body sealing systems, optoelectronics, fuel system/functional parts and safety systems.
Usui International Corporation in Plymouth, Michigan.
A supplier of plastic fans, fan drives, high pressure fuel injection tubes for diesel engines, steel pipe push rods, brake tubes, fuel tubes, and tube plating, etc.
Watson Engineering, Inc. in Taylor, Michigan.
A tubular and sheet/plate metal fabricator specializing in tubular components, bracketry and weldments for the automotive and other industries. Automotive products include intake manifolds, exhaust manifolds, catalysts, brackets, fuel rails, gears and flanges, etc.