Door Systems/Trim (117)
Suppliers of door systems and door trim including parts, components and assemblies.
3M Automotive in St. Paul, Minnesota.
A global supplier of products for automotive exteriors, interiors, powertrain/chassis, and for use in automotive manufacturing/assembly. Products include abrasives, acoustic and vibration damping, adhesives and tapes, cabin air filters, catalytic converter mat mounts and insulation, electrical connectors, fasteners, fluoroelastomers, graphic films, heat-shrink moldings, lighting, mirror buttons, nameplates and badging, optical films, plant cleaning and safety products, paint protection and replacement films, security labeling, and lead-free wheel weights.
ABC Group, Inc. in Toronto, Ontario.
Provides a complete line of thermoplastic systems and components for air induction systems, fluid management systems, fuel systems, exterior and interior systems, including instrument panels and spoilers for the global automotive industry. Processes include blow molding, injection molding, thermoforming, powder slush molding, flexible foaming systems, sheet extrusion, interior/exterior painting, metal stampings and material compounding.
ABC Group Sales and Marketing in Southfield, Michigan.
A supplier of automotive products. Applications include interior (instrument panels, seating systems, interior trim, and HVAC); exterior (bumper systems, spoilers, running boards, and trim); under-hood (flexible products, air induction, and fluid management), and fuel systems.
Adient, Ltd. in Plymouth, Michigan.
A provider of automotive systems and facility management and control. Products include seating and interior systems such as seats, overhead, door, instrument panels, trim, storage and batteries.
Advanced Technology Corporation in Andover, Ohio.
A supplier of forward, rear, side and interior lighting applications for the automotive and medium to heavy truck industries. Multipurpose components including electric connectors and componentry and various under-the-hood components.
AFX Industries, L.L.C. in Port Huron, Michigan.
A supplier of hand sewn leather and material parts to the automotive marketplace, specifically leather-wrapped steering wheels, shift knobs, parking brake handles and other trim components.
AGM Automotive, Inc. in Troy, Michigan.
Products include dome lamps, reading lamps, ambient lighting systems, task lighting systems, courtesy lighting systems, PRNDM modules, control switches, jumper harnesses, interior assist handles, coat hooks, overhead consoles, plastic interior components as well as floor mats, cargo mats and foot rests, etc. Capabilities include mold manufacturing, injection molding, plastic decoration, textile processing, etc. Site activities include design, engineering, development, validation, manufacturing and assembly.
AGS Automotive Systems in Scarborough, Ontario.
A manufacturer of heavy metal stampings for the automotive industry, including assembly and finishing of the stamped products including cross members, control arms, suspension components, instrument panel structure assemblies, modular assemblies, general stampings, and front and rear bumper assemblies.
AISIN Canada, Inc. in Stratford, Ontario.
A manufacturer of automotive parts such as belt moldings, windshields, console rail slides, fuel lid locks, seat adjusters, seat tracks, door frames, etc.
AISIN U.S.A. Manufacturing, Inc. in Seymour, Indiana.
Develops and manufactures automotive components and systems such as door frames, roofs, latching systems, brakes, engines, seating, trim molding, etc.
Allied Tube & Conduit Corporation in Harvey, Illinois.
A manufacturer and fabricator of mechanical steel tubing, in-line galvanized steel tubing, aluminum tubing, custom rollform products (coated and uncoated), etc. Automotive applications include door impact beams (DIBs) and structural components.
American Metal & Plastics, Inc. in Grand Rapids, Michigan.
A full service supplier of automotive stampings, weld components, CAD plastic injection molding, and assemblies. Products include ashtrays, storage trays, center consoles, surround bezels, cupholders, brackets, step plates, I.P. and door trim with color match paint capabilities, etc.
Ameri-Tek Manufacturing, Inc. in Logansport, Indiana.
A manufacturer of multi-slide and punch press metal stampings using hot and cold rolled steel, stainless steel, annealed spring steel, copper, brass, beryllium copper, phosphorus bronze and aluminum. Automotive applications include electronics, controls, switches, lighting, electric motors, clips, precision washers, sub-assemblies for any application, etc.
Arlen Tool Company, Ltd. in Windsor, Ontario.
Automotive products include A, B, & C pillar garnish trim; carpet retainers; consoles; glove boxes; instrument panel components; door handle bezels; step pads; roof rails; splash/stone shields; valances; license plate brackets; wheel liners; headlamp bezels; grilles, side body trim molding; mud flaps; rocker panels; air dams; hood screens; gas tanks (multi layer blow molds), etc.
Baxter Enterprises, LLC in Winchester, Tennessee.
Capabilities include interior and exterior components for fascia, underhood, instrument panel, center console, door, hard trim and luggage compartment application areas. Services include product design & development, tooling feasibility, proto/production mold design & build, check fixture design & build, prototype molding, production part molding, assembly and warehousing.
Baytech Plastics Inc. in Midland, Ontario.
Engineers, manufactures, finishes and assembles custom-molded plastic components. Services include contract manufacturing of sub-assemblies in a environmentally controlled facility.
Brose North America, Inc. in Auburn Hills, Michigan.
A supplier of window regulators, door systems, power closure systems, power head restraints, electric drives & motors, and seat adjustments.
Cascade Engineering, Inc. in Grand Rapids, Michigan.
A manufacturer of injection and blow molded parts and components for the automotive, medium and heavy truck and other industries. Applications include sound barriers and absorbers (engine covers, HVAC covers, solenoid covers, and manifold covers) and automotive trim, door panels, seat backs, and components (floor console assemblies, steering column covers, cowl grilles, interior door panels, and carpeted map pockets, etc.), as well as blow molded tubular products.
Century Tube LLC in Madison, Indiana.
Manufactures steel tube products for the automotive industry including safety door impact beams, auto exhaust pipe and auto black mechanical tubing.
Clarion Technologies, Inc. in Holland, Michigan.
A full-service custom injection molder, providing rapid prototyping and design models, mold design and engineering services, mold manufacturing, injection molding and post-molding assembly. Applications include colored Class A interior components and assemblies such as overhead consoles, dome lamps and assemblies, HVAC vents, grab handles and appliqué moldings.
Coi Rubber Products, Inc. in City of Industry, California.
A manufacturer of molded rubber and plastic components.
Commercial Vehicle Group, Inc. in New Albany, Ohio.
Services include the design and manufacture of suspension seats systems, interior trim systems (including instrument and door panels, headliners, cabinetry, molded products and floor systems), cab structures and components, mirrors, wiper systems, electronic wiring harness assemblies and controls and switches for heavy-duty trucks and commercial vehicles.
Conversion Technologies International, Inc. in West Unity, Ohio.
Offers adhesive coating, adhesive laminating, sheeting, and die cutting for the automotive and other industries. Coatings provided include hot melts, pressure-sensitive hot melts, water base coatings, adhesive films, webs, scatter/powder adhesive coatings, transfer adhesives, and spray adhesives.
DAA Draexlmaier Automotive of America LLC in Duncan, South Carolina.
Produces vehicle interior systems. Applications include interior componentsm instrument panels, linings, center consoles, levers, gear sticks, wiring harnesses, fiber optic cables, and door panels.
Dakkota Integrated Systems, LLC in Louisville, Kentucky.
Capabilities include cooling module assemblies.
Dakkota Integrated Systems, LLC in Holt, Michigan.
Specializes in the assembly and sequencing of complete interior trim assemblies and other products such as cooling systems for the automotive industry. Product areas include cockpits, door panel assemblies, overhead systems, complete floor consoles, and cargo systems.
Dayton T. Brown, Inc. in Bohemia, New York.
Services provided include product design and engineering, prototype manufacture, final production, testing, technical writing & documentation and the development of complete test systems. Capabilities include dynamic, climatic, EMI/EMC, hydraulic/pneumatic, optical, mechanical, structural, fatigue, safety & survival testing as well as conformance inspection & failure analysis thru metallurgy, magnetic particle, dimensional, and X-rays.
Detroit Manufacturing Systems, LLC in Detroit, Michigan.
Produces cockpit modules, instrument panels, door panels and center consoles. Capabilities include injection molding, ultrasonic welding, assembly, etc.
Dongwon Autopart Technology Georgia, LLC in Hogansville, Georgia.
Products include door frames, roof moldings, impact beams, side absorbers and cowl cross bars, bumper beams, and front carriers, etc.
Eagle Ottawa, LLC in Rochester Hills, Michigan.
Supplier of leather products for interior applications such as seats, consoles, armrests, door bolsters, and headrests, etc.
EFP Corporation in Elkhart, Indiana.
Automotive products include jack stand trays, bumper cores, floor spacers, steering column fillers, side impact components (for door panels), upper instrument panel fillers, pillar area pads, knee bolsters, head impact components, rear load floor/trunk spacers, water shields, headrests and dunnage trays.
Eissmann Automotive North America, Inc. in Pell City, Alabama.
An automotive interior supplier. Products include gear knobs, door systems, trim components, center consoles, instrument panels, arm rests, handbrake gaiters, shifter systems, etc. Also provides structural and surface carbon fiber components (composite components) for automotive interior applications.
Engineered Plastic Components, Inc. in Owensboro, Kentucky.
Produces plastic injection-molded automotive parts such as instrument panel assemblies, door panel assemblies, HVAC assemblies as well as interior and exterior plastic parts.
Engineered Plastic Components, Inc. in Osceola, Wisconsin.
A provider of product engineering services, injection molding and insert molding of precision tight tolerance automotive components using CAD/CAE/CAM technology and concurrent engineering. Capabilities include instrument panel (IP) assemblies; door panel assemblies; heating, ventilation & air conditioning (HVAC) assemblies; as well as interior and exterior parts.
ETO MAGNETIC in Grand Rapids, Michigan.
Products include solenoid and motorized actuators, electromechanical clutches, switch assemblies and precision injection molded components. Automotive applications include BTSI solenoids, motorized deck lid releases, canister vent solenoid, lift gate clutch, various hydraulic solenoids, various pneumatic solenoids, and overmolded coils.
Faurecia Interior Systems in Auburn Hills, Michigan.
A supplier of automotive interior components and systems. Able to produce and assemble complete cockpit systems. Parts include dashboards, consoles, trim parts, door panels, molded carpets and soundproofing mats, rear shelves, trunk liners, headliners, cockpit modules, door assemblies and soundproofing systems, external bumpers, and lateral protective strips.
Faurecia Interior Systems in Fountain Inn, South Carolina.
A production plant for cockpit and instrument panels, door panels and modules.
Felton Brush, Inc. in Londonderry, New Hampshire.
A manufacturer of brushes. Automotive applications include metal strip brushes, stapled tuft brushes, ferrule & flow thru brushes, flexible back brushes, standard metal back brushes, stapled brush nomenclature, brush seals & machine guards, standard flexible bristle seals, ring seals, adjustable motion control, containment protection, etc.
FlexFab, LLC in Hasting, Michigan.
An elastomeric engineering company that manufactures flexible components by compounding, calendering, extruding, molding, and bonding silicone rubber, organic rubber, and reinforcing materials. Products include hose, tubing, ducting, and custom designs.
Flex-N-Gate Corporation in San José Iturbide, GTO.
Products include brackets, cowl panels, door stiffeners, drawbars, floor heat insulators, floor side sills, front bumpers, gussetts, oil pans, rear bumpers, reinforcements, rockers, sun roof framework, etc. Capabilities include stamping, robotic & manual welding, auto & manual polishing, chrome plating, assembly, painting (e-coat, anti-chip, top coat and clear coat).
Flex-N-Gate Corporation in Battle Creek, Michigan.
Products include battery trays, brackets, bumper brackets, crossmembers, exterior panels, fascia brackets, fenders, floor member assemblies, hooks, inner door assemblies, radiator bracket assemblies, rail assemblies, receiver hitches, reinforcements, seat anchor assemblies, transfer covers, under cover assemblies and under engine covers. Capabilities include assembly, hemming, metal stamping, orbital riveting, and welded assemblies. Facilities include a quality laboratory.
Flex-N-Gate Corporation in Rockford, Tennessee.
Services include custom injection molding (single & multi color), hardcoating, painting, metallizing and assembly, etc. Product application areas include backlights; quarter windows; integrated roof systems; A, B, C & D pillars; roof rack components; door handles; mirror scallops; window trim; lighting components; exterior trim; headlamp lenses; tail lamp lenses; rear combination lenses; CHMSLs; cowel vent grills; steering column covers; switch bezels; shifter bezels; instrument panel masks; door bezels; arm rest trim and pads; door panel inserts; center consols; dash and door trim; steering wheel covers, etc. Capabilities include glazing, hardcoated polycarbonate, hardcoated black polycarbonate, multi-shot molding, painted and mold-in-color (MIC) interior trim, insert molding, hot stamping and pad printing, and hydrographics.
GM Nameplate in Seattle, Washington.
A manufacturer of automotive interior ornamentation including instrument panel clusters, interior trim, molded control components (PRNDL's, sill plates, headlamp switches), clocks, electroluminescent keypads, touch screen monitors and other branding components, including airbag emblems.
Grammer, Inc. in Troy, Michigan.
Produces headrests, armrests, center consoles and integrated child booster seats, crash active headrests etc.
Grupo Antolin North America, Inc. in Auburn Hills, Michigan.
Products include door and seat components as well as overhead systems such as headliners.
Heartland Automotive, LLC in Greencastle, Illinois.
A supplier of interior and exterior automotive components. Products include plastic molded, painted and and assembled parts such as instrument panels, door panels, consoles, pillars, head liners, aprons and rear gates and exterior cladding.
Hirotec America, Inc. in Auburn Hills, Michigan.
A producer of automotive body-in-white closures, exhaust components and systems. Also designs and manufactures stamping dies, bodyshop tooling and hemming systems, robotic equipment, etc. used to make automobile doors, hoods, and other body panels.
Industry Products Company in Piqua, Ohio.
A manufacturer of cargo and trunk area systems, acoustic watershields, die cut components for acoustic insulation, substrate, and sealing applications for the automotive industry.
INOAC Group North America, LLC in Springfield, Kentucky.
An automotive supplier of polyurethane and plastic interior products including armrest and door trim, seat trim and side seat armrest components; headrests; console lids and console components; airbag covers; instrument panel trim; and pillar grips/pillar garnish, cup hlders, etc.
International Automotive Components Group North America, LLC in Southfield, Michigan.
Supplies door & trim systems (hard, semi-soft & soft door panels, decorative vinyl & cloth-covered inserts, appliqués, armrests, speaker grilles, switch plates, map pockets, energy-absorbing safety items, sound deadening parts, etc.); cockpit systems (hard, soft-feel & sewn leather IPs, air distribution ducts/outlets, glove boxes, decorative appliqués & plastic trim, injection molded side panels, painted decorative parts, leather wrapped armrests); flooring (floor consoles, trim, rear package trays, floor mats, trunk trim, dash & engine noise insulation including non-woven & woven carpet, sound barrier & acoustic components, Barium sulfate acoustic insulation, etc.); headliner & modular overhead systems (consoles, formable rigid urethane headliner substrates, grab handles, visors, energy management brackets & lamps); cargo management (compression molded honeycomb/polypropylene load floors); interior garnish trim & exterior components (fenders, bumpers, rocker panels/door sills & cowl grilles, etc.).
Inteva Products, LLC in Troy, Michigan.
Designs, engineers, manufactures and assembles interior systems, cockpits, latch and closure systems and door module and window lift systems.
Johnson Electric, Inc. in Plymouth, Michigan.
Activities include virtual design, prototyping, building sequence and validation testing. Products include body instrumentation (door lock acutator motors, power mirrors, headlamp adjusters, climate controls, washer pumps etc.); powertrain management (small motors & armatures for fuel pumps, engine management, air pumps etc.); chassis braking (motors used in wipers, 4WD transfer cases, ABS, electric steering, etc.); body climate (seat adjuster motors, climate control actuators, window lift geared motors ); powertrain cooling (cooling fan modules, blower motors); actuator systems (HVAC actuators, head rests); solenoids/switchs/subsystems (shift lock solenoids, key interlock solenoids, active engine mounts).
Kasai North America, Inc. in Manchester, Tennessee.
Manufactures injection molded automotive parts such as door trim panels, rear shelf, trunk trim, dash insulators and plastic injection trim.
Katayama American Company Inc. in Shelbyville, Kentucky.
A manufacturer of exhaust flex couplings, exterior & interior trim, as well as door sashes, etc.
Kautex Corporation in Windsor, Ontario.
Produces plastic fuel tanks and fuel supply systems. Other products include blow molded functional components for engine compartment, interior and trunk applications such as washer and headlamp cleaning systems, cooling water pumps, air ducting, door trays, glove compartment lids, rear seats, etc.
Kautex Textron in Troy, Michigan.
A supplier of instrument panels, door panels, armrests, airbag doors, center consoles, headliners, exterior trim, lighting, iron castings, camshafts, fuel tank systems, fuel filter assemblies, windshield and headlamp washing systems, seating comfort systems, machine tools, components and assembly systems for the automotive market.
Key Plastics L.L.C. in Northville, Michigan.
Capabilities include engineering, program management and production services to the automotive industry. Products include interior trim (radio bezels, climate control components, instrument cluster components, louvers), headrests, floor consoles, assist handles, exterior ornamentation (door handles, trim, ornamentation), and underhood components (injection molded pressurized coolant reservoirs, injection molded pressurized power steering reservoirs). Additional capabilities include assembly of injection-molded components, Class A exterior and interior painting, multiple interior surface decoration technologies, an accredited testing laboratory along with a CAD/CAE department with in-house rapid prototyping.
Kongsberg Automotive, Inc. in Novi, Michigan.
A global supplier of seating comfort, automotive gear shift and heavy truck components. Products include seat comfort systems such as head restraints, arm rests, seat heat, vent, and lumbar supports; clutch actuation systems; cable actuation systems; gear shifters; transmission control systems; stabilizing rods, couplings; electronic engine controls; specialty hoses; tubes and fittings, etc.
Kostal of America, Inc. in Troy, Michigan.
A supplier of automobile electrical products such as manually operated devices/switches, vehicle electrical system control devices, roof modules, driver assistance components, keyless entry, steering column modules, door modules, etc.
Lakeside Plastics Limited in Oldcastle, Ontario.
A supplier of plastic injection molded parts and component assemblies for the automotive industry. Products include interior garnish trim, functional plastics, console and door components.
Lauren Plastics, LLC in Spring Lake, Michigan.
A manufacturer of extruded seals for both interior/exterior and under-hood applications. Products include windshield seals, air deflectors, radiator seals, hood seals and various gimp seals as well as tri extrusions for below belt glass run channels, seating clips and headliner protectors, extruded electronic module covers and wire raceways, tri-extruded multi-material parts for in-door and under-hood sealing applications.
LB Manufacturing, LLC in Springfield, Kentucky.
An automotive supplier of stamped, welded and manufactured assemblies. Expertise includes robotic and automated mig and resistance welding. Application areas include automotive glass assemblies and exhaust systems.
Lear Corporation in Southfield, Michigan.
A supplier of seating, interior and electronic/electrical automotive components. The seating segment includes seat systems and components, the interior segment includes instrument panels and cockpit systems, overhead systems, door panels, flooring and acoustic systems, etc., the electronic/electrical segment includes electronic products and electrical distribution systems such as wire harnesses and junction boxes; interior control and entertainment systems; and wireless systems.
Listowel Technology, Inc. in Listowel, Ontario.
A supplier of injection molded plastic parts. Automotive product application areas include defrost ducts, side defrost garnishments, control panel housings, seal pockets, globe boxes, cowl top components, spoilers, rear garnishments, side sill garnishments, center consoles, and other interior plastic components.
Magna Closures, Inc. in Newmarket, Ontario.
A supplier of latching systems, hinges & wire formed components, power closure systems, electronics, door modules, window systems, engineered glass systems, sealing, trim, roof racks, roof systems, running boards, etc.
Magna International, Inc. in Aurora, Ontario.
A supplier of automotive systems, assemblies, modules and components. Capabilities include the design, engineering, testing and manufacture of automotive interior systems; seating systems; closure systems; body and chassis systems; vision systems; electronic systems; hybrid & electric vehicles/systems; exterior systems; powertrain systems; roof systems; as well as complete vehicle engineering and assembly.
M&C Specialties Company in Southampton, Pennsylvania.
A die-cutter/converter of 3M automotive tapes, acrylic tapes, VHB products, BSR products, anti-squeak flocking, laminations, sound and vibration control products, and paint masking tapes. Applications include exterior and interior trim attachments, emblem attachment, anti-mutilation, surface protection films, shielding and conduction, anti-squeak, gaskets, under-hood labels, heat abatement, dual lock fastening, pressure sensitive adhesion, fabrics, and foams, etc.
Master Molded Products Corporation in Elgin, Illinois.
A thermoplastic custom injection molder. Capabilities include complete design, engineering and manufacturing of plastic products. Specializes in engineering resins and decorative applications and inmolded components of various materials - metal and decorative. Electric presses with sizes ranging from 40 tons to 650 tons. Conventional and rotary presses range from 1 to 110 ounces. Component application areas include vehicle instrument clusters, lens and housings, interior bezels, armrests, keyless entry systems, telematic components, and under the hood module housings.
Meridian Lightweight Technologies, Inc. in Strathroy, Ontario.
Designs, engineers and manufactures high pressure magnesium die cast, machined and assembled automotive components. Products include instrument panel beams and transfer cases. Other products include seat frames, radiator supports, front end carriers, steering column brackets and supports, transmission cases, engine cradles, other body structure, chassis and powertrain components.
Metal Powder Products Company in Westfield, Indiana.
A supplier of custom-engineered net-shape powder metallurgy products for a wide variety of automotive applications. Expertise includes a full range of PM material technology utilizing ferrous, non-ferrous, stainless steel and aluminum alloys. Products include clutch hubs, gears, cam caps, latch bolts, cams, and ring gears.
Michigan Rubber Products, Inc. in Cadillac, Michigan.
Services include compression/transfer molding, rubber and plastic injection molding, extrusion, and automated cutting & assembly. Products areas include air induction, NVH, static gaskets, tubing (air, water, and fuel), etc.
MOBIS Alabama, LLC in Montgomery, Alabama.
Produces cockpit modules and front & rear chassis. Also produces plastics used in bumper assemblies, interior door trim and exterior door garnishing.
Nascote Industries, Inc. in Nashville, Illinois.
A supplier of injection molded, painted thermoplastic parts including fascia, bumpers, door panels, fenders, and other related automotive products.
NBHX Trim USA Corporation in Comstock Park, Michigan.
Manufactures interior wood trim components for OEM automotive applications such as instrument panels, center consoles, side door panels and similar wood components.
New Center Stamping, Inc. in Detroit, Michigan.
A supplier of Class "A" and underbody stampings such as stamped fenders, doors, bumpers and other parts.
Newman Technology, Inc. in Mansfield, Ohio.
Automotive products include door frames, flexible exhaust components, and exterior trim such as window trim moldings.
Nomaco Inc. in Zebulon, North Carolina.
A supplier of foams. Automotive applications include wire harnessing, sound dampening, and manufacturing line safety. Protective applications include bumper fascias, side moldings and windshield glass during storage and shipping.
NYX, Inc. in Livonia, Michigan.
A supplier of plastic components. Capabilities include product engineering, management, and design services. Unigraphics, PDGS, MDRC, Catia, AutoCAD, injection molding - 100 ton - 2800 ton presses, extruded tubes, consoles, glove boxes, garnish trim, door trim, rear package shelves, latches, IP bezels, knee bolsters, trim, vacuum harnesses, windshield wiper/washer tubes, emission harnesses, and drain tubes.
Par 4 Plastics, Inc. in Marion, Kentucky.
Services include custom injection molding of plastic products. Product application areas include automotive exterior lighting inner lenses and housings, seat trim parts, rear access door components, plastic caps, and other miscellaneous interior plastic components.
Principal Manufacturing Corporation in Broadview, Illinois.
A provider of fineblanking and conventional stamping services including insert molding, broaching, welding, deburring, drilling, CNC machining, milling, tapping, turning, and assembly requirements. Current capabilities include plastic insert molding, fineblanking up to 500 tons, and conventional stamping up to 400 tons. Other products include screw machine components such as pins, bushing, and shafts for assemblies.
Pyramid Mouldings in Green Cove Springs, Florida.
A custom metal fabricator specializing in roll forming, light gage stampings, fabrication of extrusions, and assemblies.
RCO Engineering, Inc. in Roseville, Michigan.
A provider of whole vehicle, total product development, design and engineering services. Capabilities include interior and exterior plastic trim components, tools and parts; 3-D design services; seat development (foam, trim, plastic and metal); low volume production; aluminum injection mold tooling and production; wire harness development; and contract labor placements.
Robert Bosch, LLC in Farmington Hills, Michigan.
Parts/components supplied include gasoline systems (engine management, modules and engine components, fuel injectors, sensors, ignitions, electronic throttle control, integrated air/fuel modules); diesel systems (electronic diesel control, air management, fuel injection management, exhaust gas management); chassis (antilock braking, traction control, electronic stability programs, brake assistance, sensors, hydraulic braking and components such as brake boosters & master cylinders, disc brakes, drum brakes, wheel modules); energy & body (alternators/starters, airflow systems, software and electronics, engine thermal management components, climate-control components, seating comfort, mechatronics for side doors & roofs, windshield and rear-window cleaning); car multimedia (indication & display instruments, car radios, cockpit electronics, HMI, navigation & driver info); electronics (electronic control units, electronic occupant-protection, driver-assistance, semiconductors, sensors, relays).
RPK Mexico S.A. de C.V. in Celaya, Guanajuato.
A manufacturer of springs, wire forms and copper coils for the automotive industry.
Sanko Gosei Technologies USA, Inc. in Fort Wayne, Indiana.
Precision injection moulding of automotive components. Products include fender liners, mud guards, engine splash shields, baffles, underbody shielding, insulator panels, and various chassis and body components.
Seoyon e-Hwa Interior Systems Alabama, LLC in Selma, Alabama.
Products include door trim, seats, head linings and other interior vehicle parts.
Seoyon e-Hwa Interior Systems Georgia, Inc. in LaGrange, Georgia.
A supplier of door & pillar trim, head liners, package trays, screen assemblies, etc.
Serigraph, Inc. in West Bend, Wisconsin.
Provides graphic overlays for functional, decorative, informative and integrated applications. Capabilities include screen printing, offset printing, digital printing, forming and embossing, die-cutting, laminating, and in-mold decorating. Facilities include Class 10,000 and 100,000 clean rooms and a certified testing laboratory.
Shawmut Corporation in Plymouth, Michigan.
A supplier of engineered composite materials. Applications include laminates for headliners, body cloths, door panels, foam-in-place and low pressure injection molded components. Also provides die cut and molded parts for door trim, load floor and other interior trim applications.
Southco, Inc. in Concordville, Pennsylvania.
Provides latches, captive fasteners, hinges, handles and other accessories. Automotive application areas include instrument panels (glove boxes, ash trays and cup holders), consoles & seats (center consoles, seat & door storage, engine covers), cargo areas (load floors, panel tie downs and convenience systems) and as well service panels & shields (underbody noise shields, engine covers and exterior access panels).
SRG Global, Inc. in Warren, Michigan.
A glass and trim (chrome and painted) supplier of integrated exterior vehicle systems. Specializes in producing chrome-finished plastics, including brushed chrome and nickel, for vehicle body trim. Products include body side systems, front- and rear-end systems, as well as interior assemblies and ornamentation.
Systems Automotive Interiors, LLC in Mantachie, Mississippi.
Supplies seat, door trim and interior components.
The Haartz Corporation in Acton, Massachusetts.
A supplier of engineered coated materials. Products include sport-utility and convertible top fabrics and moldable interior trim materials.
The Haartz Corporation in Bloomfield Hills, Michigan.
A supplier of sport-utility and convertible top fabrics and moldable interior trim materials.
The LM Group in Sterling Heights, Michigan.
A full service injection molder with full tool building facilities. Capabilities include full program management for initial concept through production of component. Experience includes all thermoplastic resins and a wide range of engineered resins. Automotive products include boxes, electrical components, under-hood and dash support brackets, water deflectors and splash shields.
Tiercon Industries Inc. in Stony Creek, Ontario.
A supplier to the automotive industry of interior and exterior components and systems. Processes: molding & assembly; 37 presses (125 - 3,300 tons).
TLSI, Inc. in Huntington, New York.
Develops and manufactures products for the automotive and other industries utilizing CMOS, BiCMOS and Bipolar processes. Applications include engine controllers, power window controllers, airbag sensors, fluid (oil and coolant) level sensors, rear-window defoggers, keyless entry systems, ignition controllers, fuel injection controllers, dual battery controllers, microprocessor buffers, electronic horns, diesel engine controllers and windshield wiper controller.
Toyota Boshoku America, Inc. in Erlanger, Kentucky.
Manufactures seats, powertrain parts and other components. Products include airbag fabric, door trim, floor and dash silencers, floor mats, seat fabric, package trays, filtration and powertrain components.
Toyota Boshoku America, Inc. in Harrodsburg, Kentucky.
A supplier of interior trim, including door assemblies, seat assemblies and soft trim. Plastic injection molding technologies include behind textile molding, co-injection of dissimilar materials, gas injection, and in tool painting of parts.
Toyota Boshoku America, Inc. in Novi, Michigan.
Products include airbag fabric, door trim, floor and dash silencers, floor mats, seats, seat fabric, package trays, filtration and powertrain components.