Differential/Transfer Cases (57)
Manufacturers supplying automotive drivetrain differential/transfer cases and related components.
Allison Transmission, Inc. in Indianapolis, Indiana.
A designer and manufacturer of commercial-duty automatic transmissions, hybrid propulsion systems, and related parts and services for on-highway trucks and buses, off-highway equipment and military vehicles.
Alto Products Corporation in Atmore, Alabama.
A manufacturer of clutch plates and automatic transmission parts including friction and steel plates. Capabilities include complete design and manufacturing of bonded friction materials, stamped steel separator reaction discs, brake bands and gasket & seal kits as well as bonding, stamping, engineering, in-house tooling, and design services.
American Axle & Manufacturing, Inc. in Detroit, Michigan.
Products include driveline systems, chassis systems, and forged products including rear axles, independent front axles, independent reaProducts include driveline systems, chassis systems, and metal-formed products including rear axles, independent front axles, independent rear-drive systems, propeller shafts, steering linkages, anti-roll systems, TracRite differentials, forged products, and steering & suspension components, and steering & suspension components.
American Precision Castings Inc. in Westchester, Illinois.
A supplier of prototype low-volume production and simulated die castings in aluminum, magnesium and zinc. Processes include plaster mold, air set sand, and green sand from 1 ounce to 500 pounds. Product may be provided 'as cast' or fully tested, machined, and complete assembly.
ATTC Manufacturing, Inc. in Tell City, Indiana.
Produces machined brake rotors, brake drums, steering knuckles, rear carriers, engine bearing caps, drive shaft brackets, and differential cases. Capabilities also include stainless steel exhaust modules, pre catalytic converters, main catalytic converters, modules, turbine housings, bearing caps, flywheels, etc.
Auburn Gear, Inc. in Auburn, Indiana.
A manufacturer of drivetrain, transaxle and multi-purpose engine components. Facilities include development, gauge, gear and metallurgical laboratories. Production facilities on premises include capability for turning, gear cutting, spline rolling, heat treat, shot peening and finished grinding.
BorgWarner Automotive, Inc. in Auburn Hills, Michigan.
A manufacturer of parts and components for engines, transmissions and four-wheel drive systems. Products include engineered components and systems for automatic transmissions; emissions and thermal management products and systems; turbochargers; four-wheel and all-wheel drive torque management systems; as well as chain and chain systems for engines, transmissions and four-wheel drive systems.
Cadillac Casting, Inc. in Cadillac, Michigan.
Produces ductile iron castings. Products include engine exhaust manifolds, steering knuckles, control arms, I-beam axles, differential cases, bearing caps, and other components.
Cascade Die Casting Group, Inc. in Grand Rapids, Michigan.
A producer of aluminum and zinc die castings and related products custom made to customer specifications ready to assemble. Products used in automotive interior seats and systems, exterior body and trim, electronics and powertrain applications.
Celina Aluminum Precision Technology, Inc. in Celina, Ohio.
Manufactures aluminum engine and other components such as pistons, cylinder heads, water passages, lower blocks, knuckles, transfer cases, etc.
Chassix, Inc. in Southfield, Michigan.
A supplier of precision chassis casting and machining solutions. Automotive application areas include chassis, brake, and powertrain components. Product capabilities include forged steel, aluminum & cast iron links; brackets & fasteners; brake anchors, cables, calibers, corner modules, dust & splash shields; caliper housings; upper & lower control arms; front & rear crossmembers; cylinder heads, differential carriers & cases; engine blocks, bridges, front covers, intake manifolds; front modules; front & rear steering knuckles; hub bearing assemblies; parking brake components; pinion flanges; stems; transmision housings & output hubs; wheel hubs; etc.
Clark Testing Services, LLC in Buchanan, Michigan.
A product testing laboratory located in southwest lower Michigan. Areas of expertise include powertrain, hydraulics, structures, field data acquisition & analysis and environmental testing.
Cooper Heat Treating, LLC in Detroit, Michigan.
A heat treating facility specializing in ferritic nitrocarburizing and nitriding, ion nitriding as well as carburize & harden, carbo-nitride. Facilities include vacuum hardening and vacuum carburizing equipment.
Dana Holding Corporation in Maumee, Ohio.
A supplier of axles; driveshafts; vehicle architecture; chassis, steering, and suspension products; sealing, thermal management, fluid transfer, and engine power products; systems assembly, management, and integration services; and related service parts.
Endura Plastics, Inc. in Kirtland, Ohio.
A custom injection molder and assembler. Products range from interior assemblies to under-the-hood components produced from high temperature thermoplastics. Specializes in brake reservoir assemblies and engine control module componentry. Services include injection molding with full engineering design capabilities, decorating, welding (sonic, hot-plate & spin), machining, etc.
Fabco Automotive Corporation in Livermore, California.
A supplier of steer drive axles, transfer cases, split shaft power take offs (PTOs), etc.
Fiat Chrysler U.S., LLC in Kokomo, Indiana.
A die-cast facility. Products include aluminum parts for automotive components such as engine blocks and transmission & transaxle cases.
General Bearing Corporation in West Nyack, New York.
A manufacturer of ball bearings, tapered roller bearings, universal joint cups/bearings, spherical roller bearings, cylindrical roller bearings, balls and other bearing components.
Gibbs Die Casting Corporation in Henderson, Kentucky.
A global supplier of aluminum and magnesium die-castings for A/C compressors, fan drives, steering wheel armatures, engines, transmissions, and suspension applications. Services include machining, assembly and testing.
Grede Foundries, Inc. in Wauwatosa, Wisconsin.
A supplier of bearing caps, brake calipers/drums, control arms, oil pumps, differential carriers/cases, exhaust manifolds, & water pumps and specializes in ferrous metals such as gray iron, ductile iron, and steel castings. Product applications include axles, brackets, hydraulic end caps, compressor parts, exhaust manifolds, spool valves, crankshafts, hubs, calipers, bearing caps, differential cases, differential carriers, housings, frame segments, transmission components, gear blanks, sprockets, water pumps, wheel cylinders, and suspension parts such as control arms and knuckles.
Grede Holdings, LLC in Southfield, Michigan.
A manufacturer of cast, machined and assembled ductile grey iron components. Application areas include turbocharger housings, differential carriers and cases, scrolls and covers, brake calipers and housings, knuckles, control arms, and axle components.
JTEKT Torsen North America, Inc. in Rochester, New York.
A supplier of torque sensing traction differentials used in front, center, and rear vehicle driveline applications.
Kongsberg Automotive, Inc. in Novi, Michigan.
A global supplier of seating comfort, automotive gear shift and heavy truck components. Products include seat comfort systems such as head restraints, arm rests, seat heat, vent, and lumbar supports; clutch actuation systems; cable actuation systems; gear shifters; transmission control systems; stabilizing rods, couplings; electronic engine controls; specialty hoses; tubes and fittings, etc.
Lefere Forge in Jackson, Michigan.
A supplier of closed die hot forgings ranging from 5 to 150 pounds in carbon and alloy steel. Products include gears, hubs, spindles, wheel flanges, etc.
Linamar Corporation in Guelph, Ontario.
A supplier of engine, transmission, and driveline sub-assemblies, full assemblies and modules. Products include cylinder heads, camshafts, crankcases and connecting rods, transmission shafts, differential cases, valve bodies, gears, clutch assemblies, transmission pumps, knuckles, brake drums, brake rotors, control arms, rack and pinion assemblies, gears. Services include precision machining, assembly, testing, product development, engineering, system Integration, custom shipping & logistics.
Madison-Kipp Corporation in Madison, Wisconsin.
A supplier of aluminum engineered machined parts and subassemblies (high pressure, squeeze, ductile, semi-solid), complex machining and assembly services.
Madison Precision Products, Inc. in Madison, Indiana.
An aluminum die casting facility. Products include transmission cases, oil pans, covers, water pump fixtures, cam holders, etc.
Magna International, Inc. in Aurora, Ontario.
A supplier of automotive systems, assemblies, modules and components. Capabilities include the design, engineering, testing and manufacture of automotive interior systems; seating systems; closure systems; body and chassis systems; vision systems; electronic systems; hybrid & electric vehicles/systems; exterior systems; powertrain systems; roof systems; as well as complete vehicle engineering and assembly.
Magna Powertrain, Inc. in Troy, Michigan.
A manufacturer of automotive powertrain components. Products include four-wheel and all-wheel drive systems (transfer cases, axle drives, manual transaxles), axle modules, transmission parts, and engine systems (water pumps, oil pumps, tubular driveshaft assemblies, oil pans, and cam covers).
Meridian Lightweight Technologies, Inc. in Eaton Rapids, Michigan.
A supplier of magnesium parts for the automotive industry such as instrument panels, steering column brackets, half instrument panels, pedal brackets and transfer cases.
Meridian Lightweight Technologies, Inc. in Plymouth, Michigan.
A supplier of high-pressure lightweight magnesium die-cast automotive parts as well as machined and assembled components. Products include instrument panel beams, transfer cases, seat frames, radiator supports, front end carriers, steering column brackets/supports, transmission cases, engine cradles, as well as other body structure, chassis and powertrain components.
Meridian Lightweight Technologies, Inc. in Strathroy, Ontario.
Produces magnesium components for the automotive industry such as instrument panels, steering column brackets and housings, transfer cases and support brackets.
Meridian Lightweight Technologies, Inc. in Strathroy, Ontario.
Designs, engineers and manufactures high pressure magnesium die cast, machined and assembled automotive components. Products include instrument panel beams and transfer cases. Other products include seat frames, radiator supports, front end carriers, steering column brackets and supports, transmission cases, engine cradles, other body structure, chassis and powertrain components.
Metaldyne Performance Group, Inc. in Southfield, Michigan.
A supplier of metal-formed components. Engine components include scissor gears, turbo charger housings, exhaust manifolds, variable oil pump components, connecting rods, crankshaft dampers, isolation pulleys & assemblies, balance shaft modules, main bearing caps, timing sprockets, cranskshaft sprockets, variable cam timing products, damped gears, camshaft pulleys, etc. Driveline components include yokes, axle carriers, integrated axle tubes, differential cases, differential gears, brackets, brake calipers, brake anchors, wheel hubs, ring & pinion gear forgings, etc. Transmission components include differential assemblies, clutch assemblies, valve bodies, pumps, stator shafts, etc. Chassis components include knuckles, control arms, wheel bearings and hubs, etc.
Miba HydraMechanica Corporation in Sterling Heights, Michigan.
A supplier of friction discs with fiber composite, carbon and carbon composite materials, friction discs, steel discs and fully assembled clutch modules.
MPI Products, LLC in Rochester Hills, Michigan.
Designs, engineers, manufactures, and sells fineblanking and stamping based components and assemblies. Automotive application areas include engines (timing rings, throttle body valve plates); transfer cases (cam actuators, thrust washers); transmissions (separator plates, backing plates, dampener applied plates, planetary carrier plates, oil dams, primary piston plates, housing blanks); automatic transmission park-lock systems (parking pawls, parking gears, guide plates, detent disks, gear shift levers); sunroofs/convertible tops (sector gears, cam guides); airbags (occupant weight sensors, canister caps); doors/hoods (latches, striker plates, pawls, tailgate lift motor gears, locks); brake systems (ABS tone rings, brake shoes, axle brake flanges, caliper brackets); seating (recliner mechanism gears, tracks); steering systems (lock-nuts, washers); exhaust systems (tubular manifold flanges, catalytic converter flanges, port flanges); climate control (clutch armatures, compressor valve plates), etc.
Poitras Foundry in L'isletville, Québec.
Products include oil pump housings, flanges, end yokes, differential housings, flange yokes, sllip yokes, CV joints, etc.
Principal Manufacturing Corporation in Broadview, Illinois.
A provider of fineblanking and conventional stamping services including insert molding, broaching, welding, deburring, drilling, CNC machining, milling, tapping, turning, and assembly requirements. Current capabilities include plastic insert molding, fineblanking up to 500 tons, and conventional stamping up to 400 tons. Other products include screw machine components such as pins, bushing, and shafts for assemblies.
PTC Alliance in Wexford, Pennsylvania.
A supplier of welded and cold drawn mechanical steel tubing, chrome plated bar products, fabricated tubular parts and precision components. Automotive capabilities include shock absorbers, rack & pinion steering, body & engine mounts, camshaft tubing, assembled camshafts, steering linkages, rocker arm shafts, sway bars, collapsible steering columns, intrusion door beams, drive/prop shafts, axle housings, hydroform frame tubing, bushings & bearings and exhaust components.
Raybestos Powertrain, LLC in Crawfordsville, Indiana.
Develops and manufactures oil-cooled friction materials and thermosetting phenolic adhesives used primarily in automotive and heavy duty OE clutch applications. Products include automatic and powershift transmission friction plates, friction plates for wet wheel brake applications, PTO clutch plates, synchronizer clutches and torque converter clutch parts.
RCM Industries, Inc. in Franklin Park, Illinois.
A custom aluminum die caster. Secondary operations include machining and finishing. Automotive capabilities include fan brackets, cases, center support cylinders, dust covers, end tank covers, front covers, clutch housings, EGR housings, miscellaneous housings, bores, oil pans, piston rings, manifold plates, thrust rods, valve bodies, stepper motor housings, shift forks, retainers, pump housings, transmission housings, extension housings, stators, transfer cases, etc.
Riken of America, Inc. in Skokie, Illinois.
A manufacturer of piston rings and seal rings, camshafts, valve seats, and other engine components.
Ryobi Die Casting (U.S.A.), Inc. in Shelbyville, Indiana.
Supplies high-pressure aluminum die castings to the automobile industry. Products include transmission cases, housings, engine parts and structural parts.
Skyway Precision, Inc. in Plymouth, Michigan.
A manufacturer of CNC machined products for automotive, heavy truck, off-road, power generation, forestry and other industries. Parts include chassis, transmission and powertrain components such as engine and transmission brackets, intake and exhaust manifolds, front engine supports, alternator supports, thermostat housings, expansion tanks, flywheels, flywheel housings, aluminum oil pans, exhaust outlets, water inlets & outlets, transmission housings, forged gear blanks, brake hubs, drums and roters, etc.
Spartan Light Metal Products, Inc. in St. Louis, Missouri.
A supplier of aluminum and magnesium die-cast parts and components. Operations include heat treating, finishing, machining, assembly, etc.
Sypris Technologies, LLC in Louisville, Kentucky.
A supplier of axles and axle assembly components such as drivetrain axles, ring gears, pinions and helical gears.
TechRim Standards, LLC in Auburn Hills, Michigan.
An international automotive component supplier. Manufacturing capabilities include production of door hinges, brackets, strikers, pin and receivers, fittings, investment and shell castings, magnesium and aluminum die castings, rubber hoses and other rubber molding products. High volume production and assembly.
The Timken Corporation in Novi, Michigan.
A supplier of automotive engineered bearings, alloy steels and related products and services. Products include axles, wheel ends, etc.
The Timken Corporation in Canton, Ohio.
A supplier of friction management and power transmission products and services including engineered bearings, alloy steels, etc.
Tower Automotive, Inc. in Bellevue, Ohio.
Produces lower vehicle structures, chassis/suspension modules and components, stamped body surfaces (Class A) and other structures for passenger and light trucks.
Tupy American Foundry Corporation in Farmington Hills, Michigan.
A supplier of cast-iron automotive products manufactured in gray iron, nodular iron or CGI. Parts are supplied unfinished, oiled, painted, pre-machined or machined. Automotive products areas include engine systems (engine blocks, engine heads, crankshafts, camshafts, bearing caps, flywheels, exhaust manifolds); brake systems (brake rotors, brake supports, brake calipers); transmission and steering systems (transmission cases, steering housings); suspension and axle systems (steering knuckles, wheel hubs). Secondary operations include machining (milling, bore-milling, drilling, threading and honing, etc.).
UQM Technologies, Inc. in Longmont, Colorado.
A developer and manufacturer of power dense, high efficiency motors, precision gears and gear assemblies, wire harness assemblies, electronic boxes and circuit boards for the automotive markets including electric power systems for battery electric, hybrid electric and fuel cell electric vehicles, 42-volt under-the-hood power accessories.
Volvo Powertrain North America in Hagerstown, Maryland.
This location designs and manufactures engines as well as transfer cases, rear engine power take-off units and transmissions.
Warren Industries, Inc. in Clinton Township, Michigan.
Provides precision machining services. Designs and build part holding fixtures & tooling. Services include short run part production for validation testing as well as production part runs. Product experience includes oil filter housing, steering valves, wheel hubs, master cylinders & ABS brake blocks, transmission carriers, wheel rotors, oil cooler housings, transmission torque converter hubs and axle shaft housings, etc.
Waupaca Foundry, Inc. in Etowah, Tennessee.
Products include brake rotors and drums, brake calipers and anchors, differential cases, crankshafts.
Waupaca Foundry, Inc. in Marinette, Wisconsin.
Products include brake anchors, differential cases, calipers, bearing caps, slack adjusters, spring hangers, steering housings, etc.
Waupaca Foundry, Inc. in Waupaca, Wisconsin.
An iron foundry producing gray, ductile, austempered ductile, and compacted graphite iron castings. Products include pulleys, brackets, brake drums, composite disc brakes, brake calipers, differential cases, differential carriers, control arms, knuckles, flywheels, cylinder heads, crankshafts, housings, covers, hydraulic components, etc.