Cylinder Blocks/Heads (43)
Suppliers of engine cylinder blocks, cylinder heads and related parts.
Advanced Prototyping, Inc. in Rochester Hills, Michigan.
A prototype supplier of plastic aluminum and zinc parts. Process used are stereolithography, selective laser sintering, plastic casting, injection molding.
ALFA, S.A.B. de C.V. in García, N.L..
A supplier of aluminum automotive components such as aluminum heads and blocks for gas and diesel engines as well as transmission parts.
Becker CAD-CAM-CAST, Inc. in Southfield, Michigan.
A provider of powertrain component prototype castings. Services include the creation of a 3D database, production of prototype castings and engineering of production tooling. Prototype castings produced using low-pressure process with a core package of laser sintered cores and conventional cores.
Bodine Aluminum, Inc. in St. Louis, Missouri.
Products include cylinder heads and intake manifolds, cylinder heads, surge tanks and engine brackets.
Bodine Aluminum, Inc. in Jackson, Tennessee.
A sand and permanent mold aluminum foundry. Produces aluminum cylinder blocks and automatic transmission parts.
Bühler, Inc. in Plymouth, Minnesota.
A provider of production die casting systems, engineering solutions and related services. Automotive capabilities include wheel rims, engine blocks, wheel suspensions, car bodies of light alloys, etc.
Celina Aluminum Precision Technology, Inc. in Celina, Ohio.
Manufactures aluminum engine and other components such as pistons, cylinder heads, water passages, lower blocks, knuckles, transfer cases, etc.
Chassix, Inc. in Howell, Michigan.
Specializes in tight-tolerance machining of powertrain and chassis components. Products include bearing caps, brackets, cylinder heads, differential carriers, engine blocks, housings, hubs, etc.
Chassix, Inc. in Southfield, Michigan.
A supplier of precision chassis casting and machining solutions. Automotive application areas include chassis, brake, and powertrain components. Product capabilities include forged steel, aluminum & cast iron links; brackets & fasteners; brake anchors, cables, calibers, corner modules, dust & splash shields; caliper housings; upper & lower control arms; front & rear crossmembers; cylinder heads, differential carriers & cases; engine blocks, bridges, front covers, intake manifolds; front modules; front & rear steering knuckles; hub bearing assemblies; parking brake components; pinion flanges; stems; transmision housings & output hubs; wheel hubs; etc.
Dana Holding Corporation in Maumee, Ohio.
A supplier of axles; driveshafts; vehicle architecture; chassis, steering, and suspension products; sealing, thermal management, fluid transfer, and engine power products; systems assembly, management, and integration services; and related service parts.
Eaton Corporation in Cleveland, Ohio.
Expertise in component integration platforms for engine air management systems, powertrain and specialty controls. Produces mono- and multi-cylinder heads in aluminum or cast iron, diesel and gasoline fuel filters, oil filters, fuel vapor valves, and common rail diesel pressure/flow regulators, valvetrain products, superchargers, cylinder heads, locking and limited slip differentials, sensors, actuators, transmission control modules, mirror glass actuators, suspension controls, tire valves, decorative body moldings and fluid connectors including hoses, hose assemblies, fittings and adapters.
Engineered Machined Products, Inc. in Escanaba, Michigan.
A supplier of engine cooling components and systems. Products include electric water pumps, electric fans and thermal kits featuring brushless DC motors, as well as oil management systems.
Federal-Mogul Corporation in Plymouth, Michigan.
Site activities include testing for vehicle manufacturers as well as small-engine manufacturers. Testing capabilities include gasoline, diesel, and E-85 fuels.
Fiat Chrysler U.S., LLC in Kokomo, Indiana.
A die-cast facility. Products include aluminum parts for automotive components such as engine blocks and transmission & transaxle cases.
Fiat Chrysler U.S., LLC in Dundee, Michigan.
Site activities include engine component machining, assembly of 1.4-liter, 16-valve engines, 2.0- and 2.4-liter I-4 naturally aspirated engines and 2.0-liter dual overhead cam engines as well as engine testing. Products include cranks, heads and blocks.
Ford Motor Company in Brook Park, Ohio.
Produces the 3.5-liter EcoBoost engine.
General Motors Corporation in Bedford, Indiana.
An aluminum die-casting foundry. Manufactures aluminum, corrosion resistant & permanent mold castings, transmission cases, pistons, pneumatic cylinders & engine blocks.
General Motors Corporation in Saginaw, Michigan.
Produces aluminum engine blocks and cylinder heads. Site capabilities include aluminum green sand, lost foam and precison sand casting.
General Motors Corporation in Defiance, Ohio.
This site produces ferrous, gray iron & nodular castings. Products include cylinder blocks, cylinder heads and crankshafts.
GKN Automotive in Auburn Hills, Michigan.
A supplier of automotive driveline components and systems. Supplies constant velocity products, including CV-Joints and driveshafts, universal joints, propeller shafts and enhanced traction devices. Other automotive products include chassis assemblies and sub-assemblies, precision pressed powder metal parts and engine cylinder liners.
Harvey Industries, LLC in Wabash, Indiana.
An aluminum sand-caster. Capabilities include green sand casting, SPM molding, CNC horizontal and vertical machining, assembly and testing.. Products include intake manifolds, cylinder heads, water pump housings and differential carriers.
HN Precision in Lake Bluff, Illinois.
Specializes in precision CNC machining of complex and semi-complex castings and components utilizing non-ferrous castings and components. Components include transfer cases, retainers, 2x4 and 4x4 manual transmission housings, suspension components, engine mounts, wheel hubs, diesel engine pumps, mass transit brake housings, manifolds and lower manifolds, oil pump assemblies, throttle bodies, compressors, cylinder heads, fuel pumps and fuel injection assemblies, optical bases, and axles.
Honda of America Manufacturing, Inc. in Anna, Ohio.
Products include 4-cylinder and 6-cylinder engines. Products include engine blocks and heads, cam shafts, crank shafts, drive shafts, cylinder sleeves and brakes as well as pulley components for continuously variable transmissions. Operations include aluminum die-casting, cold forging, etc.
Kolbenschmidt Pierburg, Inc. in Auburn Hills, Michigan.
A supplier of pistons, emission control products, oil/water pumps, engine blocks, manifolds, bearings, etc.
Laminar, LLC in Ypsilanti, Michigan.
Capabilities include CNC machining of engine blocks and heads as well as other aluminum forgings and castings.
Linamar Corporation in Florence, Kentucky.
A manufacturer of machined engine components such as cylinder heads, connecting rods and accessory brackets for diesel engines; lower crankcase housings for gasoline engines; exhaust manifolds; and engine blocks.
Linamar Corporation in Guelph, Ontario.
A supplier of engine, transmission, and driveline sub-assemblies, full assemblies and modules. Products include cylinder heads, camshafts, crankcases and connecting rods, transmission shafts, differential cases, valve bodies, gears, clutch assemblies, transmission pumps, knuckles, brake drums, brake rotors, control arms, rack and pinion assemblies, gears. Services include precision machining, assembly, testing, product development, engineering, system Integration, custom shipping & logistics.
Mahle, Inc. in Morristown, Tennessee.
Pistons and engine components (pistons, piston rings, piston pins, cylinders, connecting rods, cylinder liners, bearings, and bushings). Filter systems (air, oil, and fuel filters, intake manifolds, air dryers, cabin filters, oil mist separators, activated carbon canisters). Valve train systems (cast and composite camshafts, rocker arms, valves, valve tappets, valve seat inserts, and valve guides).
Mahle Industries, Inc. in Farmington Hills, Michigan.
An automotive systems supplier. Product application areas include piston systems, cylinder components, as well as valve train, air management, and liquid management systems. Also provides powertrain engineering solutions. Capabilities include powertrain design, development and installation, electronic control systems applications, emissions and drivability development and on-board diagnostics.
Nemak Alabama in Sylacauga, Alabama.
Products include aluminum engine heads and cylinders. Production technologies include lost foam and high pressure die casting. Capabilities include machining.
Nemak, S.A.B. de C.V. in Monterrey, Nuevo Leon.
Specializes in the production of aluminum cylinder heads, engine blocks and transmission parts as well as other aluminum components for automotive applications.
Nemak Southfield in Southfield, Michigan.
A manufacturer of grey and nodular iron castings. Products include grey iron cylinder blocks for light vehicles, engine blocks and heads for trucks engines, exhaust manifolds; nodular iron crankshafts, camshafts, steering knuckles, suspension arms, and differential cases.
Nissan North America, Inc. in Decherd, Tennessee.
Produces 4-, 6- and 8-cylinder gasoline engines. Scheduled to produce motors for the electric Leaf vehicle. Site capabilities include crankshaft forging and cylinder block casting.
Performance Assembly Solutions in Livonia, Michigan.
An assembly supplier of niche and specialty powertrain modules for the transportation industry. Products include crate engines, OEM engine assemblies, fuel delivery systems, cylinder head assemblies, integrated air fuel modules, suspension systems and engine accessory drives.
PMC SMART Solutions, LLC in Cincinnati, Ohio.
A plastic injection molder. Supplies integrated plastic components and assemblies to the automotive and other industries. Specializes in under-hood components for engine management systems. Expertise in plastic processing of thermoplastic insert, hot-oil, thermoset, compression and transfer molding plastic materials including glass-filled nylons, PPS, Acetal/POM, PPA/Amodel, PET, PBT, ABS, etc. Capabilities include product design, prototyping, tooling and high-volume production.
Royal Oak Industries in Lake Orion, Michigan.
A supplier of precision machined components and sub-assemblies to the heavy truck and automotive after market industries. Products include injector sleeves, injector components, rocker arm assemblies, intake and exhaust manifolds, oil pans, cylinder blocks, bearing caps, balance shafts, flywheel housings, engine gears, lifters, and cylinder heads, etc.
SinterCast, Inc. in Naperville, Illinois.
Develops, manufactures and markets process control systems for the industrial production of compacted graphite iron (CGI). The SinterCast process is marketed to foundries primarily for the manufacturing engines.
Thompson Aluminum Casting Company, Inc. in Cuyahoga Heights, Ohio.
Capabilities include prototype and production castings of instrument panels, seat frames, cam covers, crossfire carburetor covers, valve covers, onboard computer covers, brake and clutch assemblies, and other components such as engine blocks, cylinder heads, manifolds, wheels, hubs, etc.
Thyssenkrupp Components Technologies, N.A. in Troy, Michigan.
Capabilities include assembled camshafts, cylinder head modules with integrated camshafts, crankshafts, steering and damping systems, springs and stabilizers as well as assembly of axle modules.
Toyota Motor Engineering & Manufacturing North America, Inc. in Erlanger, Kentucky.
An OEM automotive manufacturer. Operations consist of three centers: Technical Center (R&D activities); Operations Center (manufacturing support activities including production engineering, production control, and purchasing); and Planning Center (administrative functions such as human resources, accounting & finance and information systems).
Toyota Motor Manufacturing Kentucky, Inc. in Georgetown, Kentucky.
An OEM automotive manufacturer. Products include the Camry, Avalon, Solara, four-cylinder and V6 engines, axles, steering components, machined blocks, cylinder heads, crankshafts, camshafts and rods & axle assemblies. Operations include stamping, die manufacturing, body welding, painting, plastics, assembly, engine axle machining and assembly.
Tupy American Foundry Corporation in Farmington Hills, Michigan.
A supplier of cast-iron automotive products manufactured in gray iron, nodular iron or CGI. Parts are supplied unfinished, oiled, painted, pre-machined or machined. Automotive products areas include engine systems (engine blocks, engine heads, crankshafts, camshafts, bearing caps, flywheels, exhaust manifolds); brake systems (brake rotors, brake supports, brake calipers); transmission and steering systems (transmission cases, steering housings); suspension and axle systems (steering knuckles, wheel hubs). Secondary operations include machining (milling, bore-milling, drilling, threading and honing, etc.).
Weber Automotive Corporation in Auburn Hills, Michigan.
Products include engine blocks, cylinder heads, transmission housings, etc.