General Braking Components (129)
Manufacturers supplying miscellaneous brake system parts and components.
DURA Automotive Systems, LLC in Moberly, Missouri.
Products include pedal systems, traditional parking brake systems, electronic parking brake systems and parking brake cables.
DynaPlas Ltd. in Scarborough, Ontario.
Produces precision injection molded thermoplastic components, focusing on high temperature, tight tolerance, engineered resin products. Expertise in insert and overmolding. Products include fuel systems and braking parts; gears and housings; insert bearings/thrust washers; pullyes; braking control modules; connectors, seals, housings and caps; as well as electronic module cases.
Eaton Corporation in Galesburg, Michigan.
Products include single & tandem drive heavy-duty truck driving axles, shift controls, steering axles, trailer axles, brakes for trucks, trailers, & buses
Eaton Corporation in Cleveland, Ohio.
Expertise in component integration platforms for engine air management systems, powertrain and specialty controls. Produces mono- and multi-cylinder heads in aluminum or cast iron, diesel and gasoline fuel filters, oil filters, fuel vapor valves, and common rail diesel pressure/flow regulators, valvetrain products, superchargers, cylinder heads, locking and limited slip differentials, sensors, actuators, transmission control modules, mirror glass actuators, suspension controls, tire valves, decorative body moldings and fluid connectors including hoses, hose assemblies, fittings and adapters.
Endura Plastics, Inc. in Kirtland, Ohio.
A custom injection molder and assembler. Products range from interior assemblies to under-the-hood components produced from high temperature thermoplastics. Specializes in brake reservoir assemblies and engine control module componentry. Services include injection molding with full engineering design capabilities, decorating, welding (sonic, hot-plate & spin), machining, etc.
Engineered Plastic Components, Inc. in Osceola, Wisconsin.
A provider of product engineering services, injection molding and insert molding of precision tight tolerance automotive components using CAD/CAE/CAM technology and concurrent engineering. Capabilities include instrument panel (IP) assemblies; door panel assemblies; heating, ventilation & air conditioning (HVAC) assemblies; as well as interior and exterior parts.
E.R. Wagner Manufacturing Company in Milwaukee, Wisconsin.
A manufacturer of hinges and stamping assemblies for glove boxes, consoles, armrests, and cab doors.
Federal-Mogul Corporation in Winchester, Virginia.
Manufactures brake blocks and drum linings.
Flex-N-Gate Corporation in Beaverton, Ontario.
Products include scissor jacks, jack tools and parking brakes. Capabilities include anti-corrosion coating, component assembly, resistance welding, shipping, stamping and tooling.
Flex-N-Gate Corporation in Bradford, Ontario.
Products include seat frames and recliners. Primary operations anti-corrosion coating, CNC milling, design, development, machining, mechanical assemblies, mig welding, packaging, palletized-automatic assembly lines, product conception, resistance welding, small metal stamping. Products incude clutch and brake pedals, door hinges, foot parking brakes, foot rest pedals, hand parking brakes, hood hinges, hood latches, lift gate hinges, etc.
Flextronics Company in Coopersville, Michigan.
Products include solenoids (electro hydraulic, electro-mechanical), modules (electro hydraulic, electronic), and electronic brake controllers.
Fricción y Tecnología, S.A. de C.V. in Santa Ma, Aztahuacan.
A manufacturer of brake products such as disc brake pads, air brake blocks, one-way drum brake shoes with linings, disc brake hardware (retainers, ant rattle clips, caliper and pad wire springs, metallic guides, etc.), hydraulic drum brake linings, etc.
GH Metal Solutions in Fort Payne, Alabama.
A metal fabrication job shop. Capabilities include small automotive brake components. Services include in-house laser cutting, bar and tube processing, stamping, machining, sawing and welding as well as powder painting, e-coating, and zinc plating.
Grede Holdings, LLC in Southfield, Michigan.
A manufacturer of cast, machined and assembled ductile grey iron components. Application areas include turbocharger housings, differential carriers and cases, scrolls and covers, brake calipers and housings, knuckles, control arms, and axle components.
GRW Technologies, Inc. in Grand Rapids, Michigan.
Services include plastic injection molding, stamping, machining, ultrasonic welding, etc. Product capabilities include air-conditioning sensor systems; braking safety systems such as airbag, ESP, and ABS; wiper system motor covers; alternators; window lift mechanism electronic housings; switches such as micro-switches and deactivating switches; cylinder housing air mass sensors; accelerator pedal modules, etc.
Gunite Corporation in Rockford, Illinois.
A manufacturer of wheel-end products including cast iron brake drums and disc brake rotors, ductile iron disc wheel hubs and cast spoke wheels plus automatic (brake) slack adjusters.
Haldex Brake Products Corporation in Kansas City, Missouri.
A supplier of brake systems for heavy duty trucks, trailers and buses. Products include ABS systems, compressors, air dryers, regulating valves, brake actuators, automatic and manual brake adjusters, disc brakes and friction material.
Haldex Corporation in Grain Valley, Missouri.
A manufacturer and distributor of heavy-duty air brake system and suspension control system components.
Haldex Corporation in Kansas City, Missouri.
Manufacturer and distributor of pneumatic, hydraulic and electric actuation and control systems for braking, suspension and stability control for commercial vehicles.
Hamlin Tool and Machine Company Inc. in Rochester Hills, Michigan.
A manufacturer of metal stampings and assemblies. Product application areas include seat and seat belt components, steering and brake part components, engine cooling system components, transmission and powertrain components, & chassis and body support components.
Hilite International in Orion, Michigan.
Product areas include on/off solenoids, integrated solenoid bodies, pulse-width modulator solenoids, differential assemblies, gear box shafts & drive shaft flanges, transmission control systems, on/off valves, dynamic proportional valves, electro hydraulic modules, automatic gearbox valves, exhaust dosing modules, engine braking valves, common rail diesel engine valves, large displacement diesel engine valves, camshaft phasing systems, high pressure pumps & supply units, electro hydraulic power packs: torque transfer (electro-magnetic clutch assemblies, coils); brake systems (aluminum wheel cylinders, brake tube junction blocks, pressure relief valves, in-line & remote proportioning valves, actuator assemblies, ABS replicator blocks); engine cooling & lubrication (water/oil pumps, pulleys); chassis (cross members, engine mounts, heat shields); seating/interior (child safety restraint anchors, seat frames, seat belt tubes); climate control (electro-magnetic clutches, A/C fittings & manifolds, brackets).
Hilite International in Carrollton, Texas.
Serves as a development and production location focusing on hydraulic valves and electro-magnetic clutches for all wheel drive (AWD) and climate control.
Hi-Shear Automotive Corporation in Torrance, California.
A supplier of parking brake components and axle spindle nuts.
Hitachi Automotive Systems Americas, Inc. in Berea, Kentucky.
A supplier of automotive shock absorbers, struts, brake systems and air compressors.
Hitachi Automotive Systems Americas, Inc. in Farmington Hills, Michigan.
Manufactures automotive electronics and electrical parts and systems including airflow sensors, throttle bodies, engine and transmission control modules, alternators, distributors, ignition coils, idle speed control valves, electronic throttle controls and transfer case control modules.
Hitachi Cable America, Inc. in New Albany, Indiana.
Products include rubber hoses, machined and other metal components, HEV high and low voltage cables and assemblies as well as other electrical components.
HN Precision in Lake Bluff, Illinois.
Specializes in precision CNC machining of complex and semi-complex castings and components utilizing non-ferrous castings and components. Components include transfer cases, retainers, 2x4 and 4x4 manual transmission housings, suspension components, engine mounts, wheel hubs, diesel engine pumps, mass transit brake housings, manifolds and lower manifolds, oil pump assemblies, throttle bodies, compressors, cylinder heads, fuel pumps and fuel injection assemblies, optical bases, and axles.
Honda of America Manufacturing, Inc. in Anna, Ohio.
Products include 4-cylinder and 6-cylinder engines. Products include engine blocks and heads, cam shafts, crank shafts, drive shafts, cylinder sleeves and brakes as well as pulley components for continuously variable transmissions. Operations include aluminum die-casting, cold forging, etc.
Indiana Marujun, LLC in Winchester, Indiana.
Products include steering hanger beams, hand brakes, fuel lids, fuel filler pipes, hood hinges, hood locks, as well as miscellaneous body parts. Site activities include stamping, welding, painting and assembly.
ITW Tomco Plastics, Inc. in Bryan, Ohio.
An injection molder. Products include hydraulic brake reservoirs.
Jabil Circuit, Inc. in St. Petersburg, Florida.
A global provider of electronic technology applications, circuit board assemblies and electronic modules for interior and underhood applications.
Jacobs Vehicle Systems, Inc. in Bloomfield, Connecticut.
A supplier of vehicle retarding and valve actuation technologies. Products include engine retarders.
Jasper Rubber Products, Inc. in Jasper, Indiana.
A supplier of thermoset, thermoplastic and plastic elastomer products. Manufacturing processes include injection, compression and transfer rubber molding, liquid injection molded silicone, extruded, mandrel-formed and lathe cut rubber products as well as injection molded, extruded and lathe cut plastic and thermoplastic elastomers.
Kaiser Aluminum Corporation in Bingham Farms, Michigan.
Site activities include material and alloy development as well as process development for aluminum products. Capabilities include extrude casting, forging research & development and small process operations.
KI (USA) Corporation in Berea, Kentucky.
A manufacturer of automotive engine, body, and suspension components. Engine products include rear engine plates, alternator adjustment bars, gussets, mounting bracket assemblies, exhaust systems, heat shields and other related parts. Axle and suspension products include spring seat assemblies, tension rod brackets, strut sub assemblies, axle covers and other corresponding parts. Body and chassis products include bumper stay assemblies, bumper side brackets, radiator core support assemblies, brake booster torque converters and other chassis parts. Vibration insulation products include strut mounting brackets, engine mounting brackets, complete hydro-mounting assemblies, suspension bushings, and RVI bracket assemblies.
Kokoku Rubber, Inc. in Schaumberg, Illinois.
A manufacturer of rubber parts and components. Automotive applications include diaphragms for carburetors, brakes and EGRs; valves for fuel control and exhaust gas control; fuel tubes, vacuum hoses, air suction tubes; carburetor floats; oil filter gaskets, cylinder head covers; piston boots, piston seals, rubber bushings for brakes; weather-stripping, trunk lid seals; mandrel-formed hoses; gas tank seals, fuel pump covers, etc.
Lauren Plastics, LLC in Spring Lake, Michigan.
A manufacturer of extruded seals for both interior/exterior and under-hood applications. Products include windshield seals, air deflectors, radiator seals, hood seals and various gimp seals as well as tri extrusions for below belt glass run channels, seating clips and headliner protectors, extruded electronic module covers and wire raceways, tri-extruded multi-material parts for in-door and under-hood sealing applications.
Linamar Corporation in Guelph, Ontario.
A supplier of engine, transmission, and driveline sub-assemblies, full assemblies and modules. Products include cylinder heads, camshafts, crankcases and connecting rods, transmission shafts, differential cases, valve bodies, gears, clutch assemblies, transmission pumps, knuckles, brake drums, brake rotors, control arms, rack and pinion assemblies, gears. Services include precision machining, assembly, testing, product development, engineering, system Integration, custom shipping & logistics.
Mando America Corporation in Opelika, Alabama.
Manufactures brake caliper modules, calipers, steering gears, struts, and shocks.
Marion Industries, Inc. in Marion, Ohio.
A provider front and rear suspension system components as well as brake assemblies
Martinrea Industries Incorporated in Manchester, Michigan.
Specializing in automotive fuel, vapor and brake assemblies. Products include double wall brake tubes, etc.
Mercury Products Corporation in Schaumburg, Illinois.
A manufacturer of metal products and assemblies. Specializes in custom metal stampings for the automotive and other industries. Products include shelf panel supports, drip rails, sun roof brackets, exhaust hangers, cowl panels, stud plates, stud plate shields, brake dust shields, splash guards, support rails, frame brackets, and tail light brackets, etc.
Meritor, Inc. in Frankfort, Kentucky.
Products include truck and trailer axle and brake components.
Meritor, Inc. in York, South Carolina.
Products include brake components and axle dressings.
Meritor WABCO Vehicle Control Systems in Hebron, Kentucky.
A supplier of braking systems & controls and active safety systems. Capabilities include air compressors, air dryers, and air brake control valves. Advanced active safety systems include pneumatic anti-lock braking (ABS), automatic traction control (ATC), stability control systems, collision safety systems, hydraulic ABS systems and electronically-controlled air suspension (ECAS).
Meritor WABCO Vehicle Control Systems in Troy, Michigan.
A supplier of brake systems and controls such as air compressors, air dryers, air brake control valves, pneumatic anti-lock braking systems for trucks, etc. in-line filters, hydraulic ABS, hydraulic power brakes, electronic braking systems and reverse detection modules; stability control systems; suspension systems and controls such as electronic leveling modules (ELMs), mechanical leveling valves and electronically-controlled air suspensions (ECAS).
Metaldyne Performance Group, Inc. in Southfield, Michigan.
A supplier of metal-formed components. Engine components include scissor gears, turbo charger housings, exhaust manifolds, variable oil pump components, connecting rods, crankshaft dampers, isolation pulleys & assemblies, balance shaft modules, main bearing caps, timing sprockets, cranskshaft sprockets, variable cam timing products, damped gears, camshaft pulleys, etc. Driveline components include yokes, axle carriers, integrated axle tubes, differential cases, differential gears, brackets, brake calipers, brake anchors, wheel hubs, ring & pinion gear forgings, etc. Transmission components include differential assemblies, clutch assemblies, valve bodies, pumps, stator shafts, etc. Chassis components include knuckles, control arms, wheel bearings and hubs, etc.
MGM Brakes in Charlotte, North Carolina.
A supplier of double-diaphragm and piston-style spring parking brakes & service chambers, as well as e-STROKE® (electronic stroke alert), an instant brake stroke status check system.
Miba HydraMechanica Corporation in Sterling Heights, Michigan.
A supplier of friction discs with fiber composite, carbon and carbon composite materials, friction discs, steel discs and fully assembled clutch modules.
MPI Products, LLC in Rochester Hills, Michigan.
Designs, engineers, manufactures, and sells fineblanking and stamping based components and assemblies. Automotive application areas include engines (timing rings, throttle body valve plates); transfer cases (cam actuators, thrust washers); transmissions (separator plates, backing plates, dampener applied plates, planetary carrier plates, oil dams, primary piston plates, housing blanks); automatic transmission park-lock systems (parking pawls, parking gears, guide plates, detent disks, gear shift levers); sunroofs/convertible tops (sector gears, cam guides); airbags (occupant weight sensors, canister caps); doors/hoods (latches, striker plates, pawls, tailgate lift motor gears, locks); brake systems (ABS tone rings, brake shoes, axle brake flanges, caliper brackets); seating (recliner mechanism gears, tracks); steering systems (lock-nuts, washers); exhaust systems (tubular manifold flanges, catalytic converter flanges, port flanges); climate control (clutch armatures, compressor valve plates), etc.
Mubea, Inc. in Florence, Kentucky.
A supplier of suspension springs, stabilizer bars, constant tension hose clamps, valve springs and disc springs.
NASG Ohio, LLC in Ada, Ohio.
A manufacturer of metal stampings to the automotive industry. Secondary operations include resistance welding, mig welding, tapping, deburring, washing, riveting and assembly.
Nissin Brake Ohio, Inc. in Findlay, Ohio.
A manufacturer of brake systems and aluminum products. Products include brake booster and master cylinder, front and rear calipers, ABS/VSA/ESC, drum brake assembly, clutch master and slave cylinders, various engine mount brackets, AL knuckles, etc.
NN, Inc. in Johnson City, Tennessee.
A supplier of precision metal, plastic and rubber components to the automotive and other industries. Product capabilities include bearing components, hub assemblies, seals, shafts, housings, fuel injectors, brake parts, anti-vibration mounts, protective boots, etc.
NTN Bearing Corporation of America in Mount Prospect, Illinois.
A manufacturer of driveshafts, constant velocity products, hub and clutch units and bearings, etc.
Nyloncraft, Inc. in Mishawaka, Indiana.
A provider of dual plastic automotive applications, interior/exterior functional parts, vacuum manifold assemblies, air-ride suspension components, metal to plastic conversions. Capabilities include SDRC - IDEAS, AutoCAD, Unigraphics, Moldflow, and FEA.
Orscheln Products, LLC in Moberly, Missouri.
A supplier of automotive control systems. Products include parking brake systems, control cables, fluid level indicators, throttle controls and shifters.
OTSCON, Inc. in Columbia, Missouri.
A supplier of parking brake systems and brake pedals for the automotive and industrial industry including hand lever assemblies, foot pedal assemblies, cable assemblies and brake pedal assemblies.
Pacbrake Company in Surrey, British Columbia.
Specializes in the design, engineering and manufacturing of OEM automotive components. Products include engine compression relief retarders, exhaust retarders, combination retarders and air management systems (EGR valves).
Precix, Inc. in New Bedford, Massachusetts.
A designer and manufacturer of elastomeric, o-rings and customer elastomer solutions for automotive, aerospace and chemical processing applications. Automotive sealing solution applications include quick-connects, standard connects, fuel injectors, fuel rails, fuel tanks, fuel pumps, rollover valves, fuel sensors, fuel level sensors, fuel pressure sensors, relief valves, fuel filters, wheel cylinders, master cylinders, ABS seals, recuperating seals, gas caps, oil pumps, oil pressure sensors, crankcase inlet seals, electrical wiring harnesses, HVAC systems, emission control systems, alternative fuel systems seals, and transmission/transfer cases.
Prism Plastics, LLC in Port Huron, Michigan.
A plastics injection molder specializing in tight-tolerance parts. Automotive application areas include seat belts, air bags, fuel components and brake systems.
Quality Spring/Togo, Inc. in Coldwater, Michigan.
A supplier of compression, extension, and torsion springs, hose clips and constant tension steel hose clamps, wire forms, spring assemblies, etc.
Rima Manufacturing Company in Hudson, Michigan.
A supplier of precision machined metal components primarily for automotive systems. Products include bushings, valves, fittings, tube connectors, TXV brackets, nuts, unions, pins, shafts, couplings, spools & pistons. Automotive applications include transmission, HVAC, braking, steering and fuel fluid control systems.
Robert Bosch, LLC in Farmington Hills, Michigan.
Parts/components supplied include gasoline systems (engine management, modules and engine components, fuel injectors, sensors, ignitions, electronic throttle control, integrated air/fuel modules); diesel systems (electronic diesel control, air management, fuel injection management, exhaust gas management); chassis (antilock braking, traction control, electronic stability programs, brake assistance, sensors, hydraulic braking and components such as brake boosters & master cylinders, disc brakes, drum brakes, wheel modules); energy & body (alternators/starters, airflow systems, software and electronics, engine thermal management components, climate-control components, seating comfort, mechatronics for side doors & roofs, windshield and rear-window cleaning); car multimedia (indication & display instruments, car radios, cockpit electronics, HMI, navigation & driver info); electronics (electronic control units, electronic occupant-protection, driver-assistance, semiconductors, sensors, relays).
RPK Mexico S.A. de C.V. in Celaya, Guanajuato.
A manufacturer of springs, wire forms and copper coils for the automotive industry.
Sanko Gosei Technologies USA, Inc. in Fort Wayne, Indiana.
Precision injection moulding of automotive components. Products include fender liners, mud guards, engine splash shields, baffles, underbody shielding, insulator panels, and various chassis and body components.
Showa Denko Carbon, Inc. in Ridgeville, South Carolina.
Manufactures synthetic graphite. Applications include automotive friction materials.
Skyway Precision, Inc. in Plymouth, Michigan.
A manufacturer of CNC machined products for automotive, heavy truck, off-road, power generation, forestry and other industries. Parts include chassis, transmission and powertrain components such as engine and transmission brackets, intake and exhaust manifolds, front engine supports, alternator supports, thermostat housings, expansion tanks, flywheels, flywheel housings, aluminum oil pans, exhaust outlets, water inlets & outlets, transmission housings, forged gear blanks, brake hubs, drums and roters, etc.
SL America Corporation in Clinton, Tennessee.
A supplier of lamp systems including head lamps, rear lamps and fog lamps as well as center high mounted stop lamps (CHMSLs); chassis systems including parking auto shifters, manual shifters, park brake levers, pedals, fuel fillers caps and carrier-spare tires; mirror systems including outside rear view mirrors and inside mirrors, and front end module (FEM) systems including bumper beams, horns, hood-latches and sensors.
Spartan Light Metal Products, Inc. in Sparta, Illinois.
Services include aluminum die castings, full service machinery, assembly, painting, and design engineering.
Specialty Lubricants Corporation in Macedonia, Ohio.
A supplier of synthetic and silicone disc brake caliper lubricants.
Spring Team, Inc. in Austinburg, Ohio.
A producer of springs and wire forms (compression, extension, and torsion).
SSI Technologies, Inc. in Janesville, Wisconsin.
A manufacturer of sensors and sensor-based monitoring systems for the automotive, heavy truck and other industries. Products include ABS wheel-speed and electronic shift transmission rotational speed sensors, pressure sensors, ultrasonic level sensors, and electric power steering position and torque sensors.
Stahl Specialty Company in Kingsville, Missouri.
A provider of aluminum castings. Capabilities include engineering, heat treatment, process control, transportation, electronic communication, foundry, metallurgical, production machining and sub-assembly.
Steel Parts Manufacturing, Inc. in Tipton, Indiana.
A supplier of metal stamping parts. Products include metal components for automatic transmissions, torque converters, engine/transmission mounts, steering column components, suspension systems, welded assemblies and hinges.
The Federal Group in Southfield, Michigan.
A supplier of components and assemblies. Application areas include brake systems, seating components, body panel components, interior assemblies, engine system devices, powertrain components, chassis assemblies and components and cable mechanisms, etc.
The Lee Company in Westbrook, Connecticut.
A supplier of check valves, pressure relief valves, and leak-tight expansion plugs.
Thompson Aluminum Casting Company, Inc. in Cuyahoga Heights, Ohio.
Capabilities include prototype and production castings of instrument panels, seat frames, cam covers, crossfire carburetor covers, valve covers, onboard computer covers, brake and clutch assemblies, and other components such as engine blocks, cylinder heads, manifolds, wheels, hubs, etc.
TI Automotive Canada, Inc. in Bramalea, Ontario.
A supplier of fuel systems and fluid carrying systems including brake, fuel and HVAC applications.
TI Automotive, Ltd. in New Haven, Michigan.
Brake & fuel fluid carrying systems.
Tollman Spring Co., Inc. in Bristol, Connecticut.
A manufacturer of custom springs, wireforms and four-slide stampings. Automotive application areas include door locks, glove compartment locks, ignition parts, fuel systems and brake components.
Tower Automotive, Inc. in Bellevue, Ohio.
Produces lower vehicle structures, chassis/suspension modules and components, stamped body surfaces (Class A) and other structures for passenger and light trucks.
TSE Brakes, Inc. in Cullman, Alabama.
A manufacturer of new and remanufactured spring brake chambers.
U.S. Farathane Corporation in Sterling Heights, Michigan.
A custom molder of plastic in standard, insert, shuttle and rotary two-shot (dual durometer) injection processes and cast PVC. Simple assembly, automation, hot plate weld and other value added services. Black box design capable, also custom compounder of thermoplastic urethane resins. Also manufactures micro-cellular urethane components using Autothane MDI compound.
Util Canada in Concord, Ontario.
Products include unlined disc brake backing plates and shoes as well as shims, hardware, and levers.
Vernay Laboratories, Inc. in Yellow Springs, Ohio.
A designer and manufacturer of precision elastomeric fluid handling components for fuel systems, emission control systems, pneumatic/vacuum systems, hydraulic systems, automatic traction control systems, transmission systems, active suspension systems, power steering systems, and automatic temperature control/actuators.
WABCO North America, LLC in Rochester Hills, Michigan.
A supplier of electronic braking, stability, suspension and transmission control systems for heavy duty commercial vehicles.
Wanxiang America Corporation in Elgin, Illinois.
A contract manufacturer of drivelines, brakes and bearings and related components such as U-joints, CV joints, yokes, automotive bearings and hubs, industrial bearings & drive shafts as well as electric motors for seating, windshield wipers, and other 12 volt applications.
Waupaca Foundry, Inc. in Etowah, Tennessee.
Products include brake rotors and drums, brake calipers and anchors, differential cases, crankshafts.
Waupaca Foundry, Inc. in Marinette, Wisconsin.
Products include brake anchors, differential cases, calipers, bearing caps, slack adjusters, spring hangers, steering housings, etc.
Waupaca Foundry, Inc. in Waupaca, Wisconsin.
An iron foundry producing gray, ductile, austempered ductile, and compacted graphite iron castings. Products include pulleys, brackets, brake drums, composite disc brakes, brake calipers, differential cases, differential carriers, control arms, knuckles, flywheels, cylinder heads, crankshafts, housings, covers, hydraulic components, etc.
Webb Wheel Products, Inc. in Tell City, Indiana.
A supplier of truck wheel hubs, rotors, and brake drums.
Wescon Controls, LLC in Wichita, Kansas.
A supplier of mechanical control cables for throttles, hydraulic valves, transmission shift, PTO, brakes, HVAC, and mechanical remote release cables. Custom manufactured control cables.
Winzeler Stamping Company in Montpelier, Ohio.
A metal stamper. Products include clamps, brackets, hose connectors, cans, caps, tanks, sleeves, shells, inserts, accumulators, receivers/driers, deflectors, housings, ferrules, etc. Automotive application areas include fuel delivery systems, fuel rail components, steering system components, steering linkage systems, power brake components, engine cooling system components, HVAC components, and NVH components, etc. Materials capabilities include stainless steel, carbon steels, HSLA Steel, aluminum, brass, bronze, copper, and other specialty alloys.
Yamamoto FB Engineering, Inc. in Louisville, Kentucky.
Provides fine-blanking services. Products include clutches, flanges, brake pressure plates, disc pads, windshield wiper gears, transmission gears, brake caliper reinforcements, brake caliper anchor blocks, etc.
Young Technology, Inc. in Addison, Illinois.
A designer, manufacturer and importer of automotive and motor industry components including leather wrapped components, shifter system components, oil seals, bearing components, motor laminations, molded rubber, molded plastic components, forged and formed steel components.
YS Precision Stamping, Inc. in Georgetown, Kentucky.
A metal stamping facility. Products include brake components.
ZF TRW North America in Livonia, Michigan.
Products include active & passive safety systems.