Manufacturers supplying electrically powered actuators and related components.
Advanced Forming Technology USA in Longmont, Colorado.
Services include metal injection molding combining powder metallurgy and plastic injection, thixoforming, and metal matrix composites.
Advanced Prototyping, Inc. in Rochester Hills, Michigan.
A prototype supplier of plastic aluminum and zinc parts. Process used are stereolithography, selective laser sintering, plastic casting, injection molding.
AISIN Electronics, Inc. in Stockton, California.
Supplies automotive parts such as ECUs, sensors, actuators, etc. Applications include daytime running light relay units, seat position sensors and hub-type anti-lock brake sensors.
Application Engineering, Inc. in South Haven, Michigan.
Specializes in the design of mechanical components for engine and powertrain test cells. Products include dynamometers, engine handling equipment, drive line components, cooling systems, fuel systems and actuator systems, etc.
Applied Technology Associates in Albuquerque, New Mexico.
A manufacturer of angular and displacement sensors for crash testing applications.
Arnold Magnetic Technologies Corporation in Rochester, New York.
A manufacturer and source of magnets, magnetic assemblies and other assemblies. Applications include actuators (solenoids), motors (rotary permanent magnet motors, stepper motors, air core gauge motors, and speakers), sensors (hall effect, magnetostrictive, variable reluctance, and GMR), and switches (reed switches, and hall effect switches).
AVM Industries LLC in Marion, South Carolina.
Products include gas springs, temperature controlled gas springs, anti-corrosive gas springs, dampers, self-centering dampers and vacuum actuators, etc.
AVX Corporation in Fountain Inn, South Carolina.
A manufacturer of passive electronic components including capacitors, circuit protection devices, connectors, filters, varistors, crystals and timing devices. Automotive application areas include safety, engine control, infotainment and chassis control.
BorgWarner Automotive, Inc. in Auburn Hills, Michigan.
A manufacturer of parts and components for engines, transmissions and four-wheel drive systems. Products include engineered components and systems for automatic transmissions; emissions and thermal management products and systems; turbochargers; four-wheel and all-wheel drive torque management systems; as well as chain and chain systems for engines, transmissions and four-wheel drive systems.
Bosch Rexroth Corporation in Charlotte, North Carolina.
A supplier of linear motion products, Cartesian robotics and assembly technologies.
Bourns, Inc. in Riverside, California.
A manufacturer of electronic components for automotive applications include steering, fuel level, audio controls, circuit protection devices, board level components, non-contacting and pressure sensors.
Buehler Motor Inc. in Morrisville, North Carolina.
A manufacture of standard and custom engineered sub fractional DC motors, gearmotors and actuators. Applications include mirror adjusting, regulation of air conditioning, and triggering of ABS mechanisms, etc.
CalsonicKansei North America, Inc. in Farmington Hills, Michigan.
A supplier of systems and components for exhaust, engine cooling, climate control, front end modules, cockpit modules, clusters, and interior plastics.
Capsonic Automotive, Inc. in Auburn Hills, Michigan.
A manufacturer of automotive end item assemblies such as electromechanical assemblies, switches, solenoids, sensors, motor assemblies, wiring, and lighting.
CEBI USA, Inc. in Dearborn, Michigan.
Products include including motors, actuators, sensors, switches & exterior lighting components. Automotive application areas include actuation, cleaning systems, HVAC, control devices, temperature management, powertrain components, locking systems, seat adjustment, window & roof actuation, lighting, gasoline engine components, and fuel system components.
Continental Corporation in Auburn Hills, Michigan.
A supplier of automotive powertrain, car body, chassis, safety and interior & infotainment systems and components. Areas of expertise include piezo common rail diesel injection systems; air-fuel modules and complete air induction systems; electronic throttle controls (ETCs); mechatronic transmission controls; multipoint, multi-loop airbag controllers; pressure sensor satellite for side airbags; 24 GHz near-field radar sensing; occupant weight and classification sensors for airbags; tire pressure monitoring systems; intelligent switching units; electronic climate-control units; window closure force limitation motors with anti-pinch; passive keyless entry; human factors optimized instrument clusters; commercial vehicle mobile office systems; advanced driver information and navigation systems; re-configurable displays; and vehicle cockpit systems, etc.
Corlett Turner Company in Zeeland, Michigan.
A manufacturer of precision, high-volume, screw machine component parts. Application areas include diesel & gasoline engines, transmissions, electric motors, actuators, compressors, etc. Product capabilities include adapters, bearing rollers, connectors, couplers, cylinders, fasteners, guides, inserts, motor and drive shafts, pins, pistons, plungers, transmission rails, rods, shafts, sleeves, splined and geared shafts, spools, studs, valves and light sub-assemblies.
CTS Corporation in Elkhart, Indiana.
A manufacturer of electronic components and assemblies for the automotive and transportation industries. Products include belt tension sensors, fuel senders, seat position sensors, pedal position sensors, pedal assemblies, rotary position sensors, throttle position sensors and electronic throttle controls, actuators, exhaust gas recirculation parts, etc.
CTS of Canada Company in Mississauga, Ontario.
A manufacturer of a variety of position sensors, actuators and pedal assemblies.
Dayton T. Brown, Inc. in Bohemia, New York.
Services provided include product design and engineering, prototype manufacture, final production, testing, technical writing & documentation and the development of complete test systems. Capabilities include dynamic, climatic, EMI/EMC, hydraulic/pneumatic, optical, mechanical, structural, fatigue, safety & survival testing as well as conformance inspection & failure analysis thru metallurgy, magnetic particle, dimensional, and X-rays.
DENSO International America, Inc. in Southfield, Michigan.
A supplier of powertrain control systems including diesel injection products, engine control components, and system control components. Electric systems including engine electrical products, safety and chassis systems products. Electronic systems including body electronics and electronic devices. Thermal systems including air conditioning, cooling systems, and environmental systems such as radiators etc.
Eaton Corporation in Cleveland, Ohio.
Expertise in component integration platforms for engine air management systems, powertrain and specialty controls. Produces mono- and multi-cylinder heads in aluminum or cast iron, diesel and gasoline fuel filters, oil filters, fuel vapor valves, and common rail diesel pressure/flow regulators, valvetrain products, superchargers, cylinder heads, locking and limited slip differentials, sensors, actuators, transmission control modules, mirror glass actuators, suspension controls, tire valves, decorative body moldings and fluid connectors including hoses, hose assemblies, fittings and adapters.
Electricfil Corporation in Elkmont, Alabama.
A supplier of sensors for engine, transmission and powertrain applications.
Electricfil Corporation in Livonia, Michigan.
A supplier of sensors, ignition components (coils and high-voltage wire sets) and actuators.
Endura Plastics, Inc. in Kirtland, Ohio.
A custom injection molder and assembler. Products range from interior assemblies to under-the-hood components produced from high temperature thermoplastics. Specializes in brake reservoir assemblies and engine control module componentry. Services include injection molding with full engineering design capabilities, decorating, welding (sonic, hot-plate & spin), machining, etc.
Engineered Plastic Components, Inc. in Osceola, Wisconsin.
A provider of product engineering services, injection molding and insert molding of precision tight tolerance automotive components using CAD/CAE/CAM technology and concurrent engineering. Capabilities include instrument panel (IP) assemblies; door panel assemblies; heating, ventilation & air conditioning (HVAC) assemblies; as well as interior and exterior parts.
ETO MAGNETIC in Grand Rapids, Michigan.
Products include solenoid and motorized actuators, electromechanical clutches, switch assemblies and precision injection molded components. Automotive applications include BTSI solenoids, motorized deck lid releases, canister vent solenoid, lift gate clutch, various hydraulic solenoids, various pneumatic solenoids, and overmolded coils.
Flextronics Company in Farmington Hills, Michigan.
A global manufacturer of electronics and electromechanical products. capabilities include advanced electronic technology development, advanced product development, advanced manufacturing engineering, prototyping, and program management (APQP). Business units include electronics, electromechanical, and electrical, serving the automotive, appliance and other industries.
GITS Manufacturing Company in Creston, Iowa.
A supplier of oil hole covers, oil cups, brush oilers, tubing clips, shift seals, and drum & tank gauges.
GKN Sinter Metals, Inc. in Emporium, Pennsylvania.
Manufactures sintered components for engine, manual and automatic transmission, and body & chassis applications. Also produces parts for hydraulic applications in the automotive industry and other industry market segments. Produces powder forged automotive connecting rods.
Globe Motors, Inc. in Dayton, Ohio.
A supplier of precision motion control solutions for automotive applications. Products include subfractional horsepower motors and motorized devices. Automotive applications include transfer case actuators, electric power assisted steering, x-by-wire, etc.
GW Plastics, Inc. in Bethel, Vermont.
Provides medium-to-high volume close-tolerance injection molded components and assemblies such as connectors, fuel system components, sensors and controls.
Haldex Brake Products Corporation in Kansas City, Missouri.
A supplier of brake systems for heavy duty trucks, trailers and buses. Products include ABS systems, compressors, air dryers, regulating valves, brake actuators, automatic and manual brake adjusters, disc brakes and friction material.
Harada Industry of America, Inc. in Novi, Michigan.
A supplier of actuators, remote control car starters, motorized antennas/manual antennas, headlamp levelers, roof antennas, keyless entry modules, multi-functional glass antenna systems, and bumper antennas. Site operations include sales, research & development of mobile antennas and related products.
Haydon Kerk Motion Solutions, Inc. in Waterbury, Connecticut.
A manufacturer of steppler motor based linear actuators, lead screw assemblies, linear guides, rails, splines and sealed switches.
Hilite International in Carrollton, Texas.
Serves as a development and production location focusing on hydraulic valves and electro-magnetic clutches for all wheel drive (AWD) and climate control.
Hitachi Automotive Systems Americas, Inc. in Farmington Hills, Michigan.
Manufactures automotive electronics and electrical parts and systems including airflow sensors, throttle bodies, engine and transmission control modules, alternators, distributors, ignition coils, idle speed control valves, electronic throttle controls and transfer case control modules.
HUSCO International, Inc. in Waukesha, Wisconsin.
Designs and manufactures custom hydraulic and electrohydraulic controls and control valves for off-highway and automotive applications that focus on improved emissions and increased engine efficiency.
Johnson Electric Automotive Products Group in Springfield, Tennessee.
A supplier of climate control and other automotive components. Products include flatpack actuators, pulse width modulation (PWM) controllers, and high-speed multi-turn actuators. Services include engineering design, rapid prototyping, etc. Capabilities include metrology, validation, noise reduction, laser noise testing, design, etc.
Keihin Carolina System Technology, Inc. in Tarboro, North Carolina.
A supplier of electronically actuated devices and electronic control unites (ECUs). Products include PCBs, spool valves, auto transmission solenoids, etc.
Kendrion (Shelby), Inc. in Shelby, North Carolina.
A supplier of switches, actuating devices, sensors and control components to the automotive, heavy truck, recreational vehicle, off-road, engine, and other markets. Products include custom flow control valves (diesel fuel pressure, A/C compressor control, transmission control); diesel fuel pressure custom coils; engine oil and heavy truck air brake pressure switches; 12 volt direct current circuit protection breakers; as well as neutral start, reverse lamp and clutch control mechanical switches, etc.
Key Safety Systems, Inc. in Lakeland, Florida.
A supplier of occupant protection systems, including airbags and inflators, seat belts, steering wheels, and electronics and sensors, interiors and plastics.
Kongsberg Automotive, Inc. in Novi, Michigan.
A global supplier of seating comfort, automotive gear shift and heavy truck components. Products include seat comfort systems such as head restraints, arm rests, seat heat, vent, and lumbar supports; clutch actuation systems; cable actuation systems; gear shifters; transmission control systems; stabilizing rods, couplings; electronic engine controls; specialty hoses; tubes and fittings, etc.
Littelfuse Commercial Vehicle Products in Boston, Massachusetts.
A manufacturer of electrical and electronic switches and connectors for heavy-duty trucks and equipment including low voltage disconnect switches, toggles, rockers, push-pulls, rotary switches, solenoids, disconnect switches, and battery isolators.
Mabuchi Motor America Corporation in Troy, Michigan.
A manufacturer of DC-fractional horsepower electric motors. Automotive applications include power window lifters, rearview mirror actuators, retractable rearview mirror actuators, door lock actuators, window washer pumps, idle speed controllers, automatic cruise controls, air conditioning damper actuators, lumbar supports, trunk openers, fuel-tank lid openers, automatic antenna lifters, headlight beam level adjusters, emission control devices, car navigation systems, etc.
Magna Closures, Inc. in Newmarket, Ontario.
A supplier of latching systems, hinges & wire formed components, power closure systems, electronics, door modules, window systems, engineered glass systems, sealing, trim, roof racks, roof systems, running boards, etc.
Magna Electronics, Inc. in Auburn Hills, Michigan.
A supplier of electronic controls, actuators, sensors and motors. Specializes in driver assistance & safety systems, body electronics & HMI, intelligent power systems, engine electronics & liquid sensors, etc.
Magna International, Inc. in Aurora, Ontario.
A supplier of automotive systems, assemblies, modules and components. Capabilities include the design, engineering, testing and manufacture of automotive interior systems; seating systems; closure systems; body and chassis systems; vision systems; electronic systems; hybrid & electric vehicles/systems; exterior systems; powertrain systems; roof systems; as well as complete vehicle engineering and assembly.
Magna Mirrors North America, Inc. in Holland, Michigan.
A supplier of mirror systems, window systems, door handles, and electronics.
Marsh Bellofram Corporation in Newell, West Virginia.
A manufacturer of pressure and temperature instrumentation, elastomeric diaphragms, and control components.
Metal Powder Products Company in Westfield, Indiana.
A supplier of custom-engineered net-shape powder metallurgy products for a wide variety of automotive applications. Expertise includes a full range of PM material technology utilizing ferrous, non-ferrous, stainless steel and aluminum alloys. Products include clutch hubs, gears, cam caps, latch bolts, cams, and ring gears.
MGM Brakes in Charlotte, North Carolina.
A supplier of double-diaphragm and piston-style spring parking brakes & service chambers, as well as e-STROKEŽ (electronic stroke alert), an instant brake stroke status check system.
Micromatic, LLC in Berne, Indiana.
A supplier of rotary actuators and automated assembly equipment.
Microplastics, Inc. in St. Charles, Illinois.
Services include insert molding (prototype and production) and associated assembly, including potting application, welding and soldering. Automotive applications include filters, ECU housings, sensor housings and connectors for safety electronics, braking, ignition, door electronics and all other vehicle electronics systems.
Mikuni American Corporation in Northridge, California.
A supplier of position sensors, carburetors, throttle bodies, fuel pumps, vacuum pumps, accelerator pedal modules, fuel injection systems, heaters, exhaust valves, oil pumps, coolant control valves, water pumps, secondary air valves, metering oil pumps, and hydrogen sensors, etc.
Murata Electronics North America, Inc. in Smyrna, Georgia.
A supplier of ceramic-based passive electronic components including capacitors, filters, inductors, piezo alarms, resistors, resonators, VCO's circuit modules, and high frequency products.
NSK Corporation in Ann Arbor, Michigan.
Designs and manufactures anti-friction bearings, precision machinery and parts, mechatronics and automotive products. Capabilities include ball & roller bearings, mounted units, linear guides, ball screws, actuators, Cartesian robots, direct-drive motors and ball screw support bearings. Bearing types include deep groove, angular contact, self-aligning, thrust, cylindrical, spherical, tapered and needle.
Panasonic Automotive Electronics Company in Farmington Hills, Michigan.
A supplier of automotive DVD audio and video entertainment systems, CD and cassette radios, audio amplifiers and speakers. Additional products include audio mechanisms, standard components, custom components and automotive camera solutions for a variety of automotive applications.
PMC SMART Solutions, LLC in Cincinnati, Ohio.
A plastic injection molder. Supplies integrated plastic components and assemblies to the automotive and other industries. Specializes in under-hood components for engine management systems. Expertise in plastic processing of thermoplastic insert, hot-oil, thermoset, compression and transfer molding plastic materials including glass-filled nylons, PPS, Acetal/POM, PPA/Amodel, PET, PBT, ABS, etc. Capabilities include product design, prototyping, tooling and high-volume production.
Robert Bosch, LLC in Farmington Hills, Michigan.
Parts/components supplied include gasoline systems (engine management, modules and engine components, fuel injectors, sensors, ignitions, electronic throttle control, integrated air/fuel modules); diesel systems (electronic diesel control, air management, fuel injection management, exhaust gas management); chassis (antilock braking, traction control, electronic stability programs, brake assistance, sensors, hydraulic braking and components such as brake boosters & master cylinders, disc brakes, drum brakes, wheel modules); energy & body (alternators/starters, airflow systems, software and electronics, engine thermal management components, climate-control components, seating comfort, mechatronics for side doors & roofs, windshield and rear-window cleaning); car multimedia (indication & display instruments, car radios, cockpit electronics, HMI, navigation & driver info); electronics (electronic control units, electronic occupant-protection, driver-assistance, semiconductors, sensors, relays).
Robert Bosch, LLC in Plymouth, Michigan.
Develops and manufactures mechatronic components and systems for automotive body applications. Products include actuators (window lifting, seat adjustment, sunroof actuation and transmission automation); blower modules and drives for engine cooling fans; pumps and valves for engine cooling systems; motors and drives for fuel pumps; air conditioning components; front and rear wiper drives, wiper arms, wiper blades and rain sensors; and electric steering motors, etc.
RPK Mexico S.A. de C.V. in Celaya, Guanajuato.
A manufacturer of springs, wire forms and copper coils for the automotive industry.
SPX Corporation in Charlotte, North Carolina.
A supplier of special service tools, equipment, diagnostics and information services for vehicle OEM dealership networks. Also a supplier of automotive transmission fluid filters.
Stoneridge Electronics North America in El Paso, Texas.
Designs and manufactures electronic instrument clusters, driver message centers, power conversion products, multiplexed modules and electrical systems, and electronic switch modules that collect, store and display vehicle information, such as speed, pressure, maintenance data, trip information, operator performance, temperature, distance traveled, and driver messages related to vehicle performance.
Stoneridge, Inc. in Lexington, Ohio.
A supplier of emissions-related sensors and controls used in diesel and gasoline engine applications including exhaust aftertreatment. Products include low to high temperature (-40C to 1050C) sensors, pressure switches/transducers, canister vent solenoid valves, fluid level switches, emissions systems valves (i.e. turbo wastegate valves), coil actuated products and speed & position hall effect sensors.
Telamon Industrial Solutions in Dayton, Ohio.
Specializes in electromechanical switches, wire harnesses, contract manufacturing, inspection, sorting with full design and engineering support for prototype, production, and past model service.
Thermotion, LLC in Mentor, Ohio.
A supplier of electro-thermal actuators, speed sensors, indicators, and control devices. Applications include automotive heater control valves and axle gear engagement.
Thomas Magnete USA, LLC. in Brookfield, Wisconsin.
Development partners and system suppliers of high-performance electro-magnetic actuators, solenoids and valves for niche markets in the automotive industry and mobile fluid technology. Products include on-off solenoids, proportional solenoids, hydraulic valves, on-off valves, proportional valves, electromechanical actuators, etc.
TLX Technologies, LLC in Pewaukee, Wisconsin.
A supplier of solenoids, actuators and fluid control valves. Automotive application areas include pedestrian safety systems, selective catalytic reduction systems, etc.
Trombetta Motion Technologies in Milwaukee, Wisconsin.
A supplier of standard and custom solenoids, linear actuators and electronic controls designed to meet the harshest automotive application. Custom engineered design capability. Manufacturer of solenoid actuators and specialized control modules. Applications include door latching and locking, transmission and brake engagement, engine shut-down and throttle control. Solenoids can deliver forces up to 400 pounds, strokes up to four inches.
U.S. Tsubaki, Inc. in Chicopee, Massachusetts.
A system supplier of roller chain drive systems (timing, oil pumps, and balance drives).
Visteon Corporation in Van Buren Township, Michigan.
A supplier of complete automotive systems, modules, and single components in the following areas: chassis, climate control, electronics, exterior/interior systems, glass, fuel systems, engine management and powertrain controls.
Woco Tech USA, Inc. in Novi, Michigan.
Designs and produces actuators as well as offers acoustic and polymer technology solutions.